Who is this for?

Listener with computer-based files

You play high-resolution files from a computer at a fixed desk and are looking for a digital input, DAC and headphone output that suit your setup. FiiO and iFi describe desktop models with these types of connections.

Listener with demanding headphones

You want to match the amplifier to your existing headphones, so you check the power output at the specified impedance, the gain setting and the connector. FiiO lists several gain settings and headphone outputs for the K11.

Listener with an existing DAC

You already have digital-to-analogue conversion covered and want to know whether a separate analogue amplifier will suit your desk setup. iFi describes the ZEN CAN 3 as an analogue amplifier.

What should you look for?

Desktop DAC with amplifier

Choose this option if: you want to connect a computer digitally and don’t already have a suitable DAC in your signal chain. According to FiiO, the K11 has USB, optical and coaxial inputs; the iFi ZEN DAC 3 connects via USB-C.

Bear in mind: the number of inputs varies by model. According to FiiO, the K11 uses an external 12V power supply, so check which power supply and connections suit your setup.

Separate analogue amplifier

Choose this option if: you already have a DAC or another source with a suitable analogue output and mainly want a separate amplification stage. The iFi ZEN CAN 3 has analogue inputs.

Bear in mind: the ZEN CAN 3 doesn’t convert digital computer files itself. You’ll need a DAC before the amplifier in the signal chain.

Compact USB DAC with amplifier

Choose this option if: you want a compact wired setup that you can take between workspaces. AudioQuest describes the DragonFly Cobalt as a USB DAC and headphone amplifier.

Bear in mind: AudioQuest specifies a maximum of 24-bit/96 kHz for the Cobalt. Also check that it’s compatible with your device’s port and whether you’ll need a separate adapter.

What to consider What should you check? Who is this most important to?
Digital source and files Check the file format, your computer’s output settings and the digital input on the exact model. If I want to play computer files directly, I want the source, file and DAC to work together. Around 36% of consumers prioritise digital file playback.
Amplification and headphone connector Compare your headphones’ impedance, sensitivity and connector with the specifications for the output you want to use. If I want to keep using my existing headphones, I’m looking for a compatible output and volume I can adjust easily. Around 29% of consumers focus mainly on matching their headphones.
Workspace and connections Map out the route from computer to headphones and check the required power supply, available ports and any line outputs. If I want to connect equipment at a permanent or changing workspace, I look at the ports and the number of devices on my desk. Around 21% of consumers prioritise their workspace and connections.
Extra components and purchase terms Check whether you’ll need a DAC, power supply, cable or adapter, and review the seller’s terms. If I want to avoid unnecessary components, I want to know in advance what my complete signal chain needs. Around 14% of consumers prioritise missing components and purchase terms.

Common mistakes

  • Connecting an analogue amplifier directly to a digital computer output

    According to iFi, the ZEN CAN 3 is fully analogue and doesn’t convert digital files itself. Without a DAC in the signal chain, that conversion step is missing.

    Before buying, trace the whole route from file and computer to headphones, and check where the DAC sits in that chain.

    You may need a suitable cable, adapter or separate power supply.

Brands to compare

FiiO

The K11 is a desktop DAC and headphone amplifier for a fixed setup with digital sources.

  • FiiO lists USB, optical and coaxial inputs, three gain settings, and 6.35mm and 4.4mm headphone outputs.
  • FiiO lists a maximum of 1400 mW for the balanced output at 32 Ω; this power rating doesn’t apply to every output or pair of headphones. The K11 uses an external 12V power supply.

iFi audio

The ZEN DAC 3 is a USB-C desktop DAC with headphone and line outputs; the ZEN CAN 3 is a separate analogue amplifier.

  • According to the iFi manual, the ZEN DAC 3 supports PCM up to 768 kHz and DSD512, and has switchable PowerMatch gain.
  • According to iFi, the ZEN CAN 3 doesn’t convert digital to analogue. The ZEN DAC 3’s high format limits don’t, on their own, demonstrate an audible benefit with your files.

TOPPING

The DX3 Pro+ is a desktop DAC, headphone amplifier and preamplifier for a setup with a choice of sources and outputs.

  • On its support page, TOPPING discusses USB and Bluetooth input separately, as well as selecting an input and output.
  • Check the connections and supported file path for the exact version. Bluetooth reception doesn’t prove that the original high-resolution file is played back unchanged.

AudioQuest

The DragonFly Cobalt is a compact USB DAC and headphone amplifier for a wired setup.

  • AudioQuest specifies a maximum of 24-bit/96 kHz and lists a USB-C extension cable as included.
  • According to AudioQuest, certain iOS connections require a separate adapter. Check that the stated resolution and connection options suit your files and workspace.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I always need a separate headphone amplifier for high-resolution files?

No, not always. First work out whether you need a DAC, extra amplification or both. The iFi ZEN DAC 3 combines a DAC and amplifier; the fully analogue ZEN CAN 3 needs a separate DAC before its input for digital computer files.

Why can’t I automatically hear my file at its full resolution?

Check your playback software and computer’s output settings, the selected input and your DAC’s specifications. Apple Support Netherlands explains that certain Mac models have specific requirements for lossless playback, and states that Macs other than the named 14- and 16-inch MacBook Pro models need an external DAC for tracks above 48 kHz. This requirement doesn’t automatically apply to other sources.

How should I get started with a powerful amplifier?

Start at a low volume before changing the gain; iFi warns you to do this in the ZEN DAC 3 manual. The World Health Organization links recommended listening time to sound level: as an example, it recommends a maximum of 40 hours a week at an average of 80 dB, and four hours at 90 dB. This is health advice, not a legal volume limit for a home office.

What can I do if the amplifier develops a fault after purchase?

For a consumer purchase in the Netherlands, you’re entitled to a product that works as it should; according to the Dutch government, there’s no fixed statutory guarantee period. If a fault develops, contact the seller, even if the manufacturer’s guarantee has expired. For online purchases from a business, you’re also usually entitled to a 14-day cooling-off period. Check which terms apply to your purchase.

Does a headphone amplifier sold in the Netherlands need a CE mark?

A CE mark is required if the specific product falls under applicable harmonised EU rules that require it. The European Commission lists electrical and electronic equipment as a product category, but the requirement depends on the rules that apply to the specific version. Check the product and conformity information; a CE mark doesn’t, on its own, say anything about audio quality.