Who are these Wi-Fi solutions for?

Viewer with one room that has weak coverage

Your documentary keeps stuttering at the far end of the hallway, and you’re looking for a suitable spot for one extra Wi-Fi point.

Household with several rooms that have weak coverage

You want coverage in more than one place and are weighing up separate Wi-Fi points against a mesh setup.

Viewer who may be able to run a network cable

You may be able to run a cable to the TV or an access point, and want to avoid relying on a wireless connection through the hallway.

What should you consider when choosing?

One wireless repeater

Choose this option: if one room has weak Wi-Fi and there’s a spot where the repeater can still get a good signal from the router.

Bear in mind: the wireless connection back to the router still matters. Better coverage by the TV won’t automatically mean a faster internet connection.

Mesh Wi-Fi points

Choose this option: if several rooms need coverage, or separate points are easier to position than one repeater in the hallway.

Bear in mind: you’ll usually need more equipment, and wirelessly connected mesh points also need a good connection between them.

Wired access point

Choose this option: if you can run a network cable from the router to the room where you watch, or to a suitable spot at the far end of the hallway.

Bear in mind: you’ll need to plan the cable route and find a suitable spot for the access point.

What to consider What should you look for? Who should give this more weight?
A stable stream where you watch Test the connection next to your playback device. Netflix recommends at least 5 Mbps for 1080p and 15 Mbps for 4K on its service. If I mainly want to watch in one place without interruptions, the connection by the TV matters most. Around 36% of consumers prioritise a stable stream where they watch.
Positioning in a narrow hallway Find a spot with good reception from the router and as few obstacles as possible. Consumentenbond suggests using a signal indicator as a guide. If there’s little room in the hallway, I want a point that gets good reception without obstructing the way. Around 29% of consumers give practical positioning the most weight.
Coverage in more rooms Map out the weak spots and check that the mesh features you want work with your router. If you also want to reach other rooms, you may need more than one extra Wi-Fi point. Around 21% of consumers prioritise coverage beyond a single room where they watch.
Purchase cost, power consumption and management Compare how many devices you’ll need and check information about setup, energy use and updates. If I want the coverage I need with as little equipment and upkeep as possible, these practical considerations matter. Around 14% of consumers prioritise the purchase cost and ease of management.

Common buying mistakes

  • Putting the repeater where the Wi-Fi is already weak

    The repeater needs a usable connection to your existing network so it can extend the signal.

    Try a socket closer to the router and check the signal indicator before testing the stream where you watch.

    You may need to try a different positioning solution.

  • Assuming the maximum Wi-Fi speed guarantees good streaming quality

    The connection where you watch also depends on the route back to the router and the internet speed available.

    Measure the connection next to your playback device and compare the result with your streaming service’s requirements and chosen picture quality.

  • Assuming every router fully supports mesh features

    Manufacturers often describe mesh features for specific compatible devices. Basic repeater compatibility isn’t the same thing.

    Check the router model, hardware version and mesh technology required separately.

    You may need additional compatible equipment to use the mesh features you want.

Brands and models to consider

TP-Link

According to TP-Link, the RE705X is a Wi-Fi 6 plug-in repeater with a gigabit Ethernet port and access point mode.

  • TP-Link says the RE705X supports OneMesh.
  • Check that your router and its hardware version are compatible with the mesh features you want. Advertised band speeds aren’t the same as measured streaming speeds in your hallway.

FRITZ!

The FRITZ!Repeater 1200 AX combines a compact design with gigabit LAN. FRITZ! describes it as working with a FRITZ!Box in a mesh setup.

  • FRITZ! says the model can also be used with other routers.
  • Using it with another router doesn’t automatically make all FRITZ! mesh features available.

ASUS

According to ASUS, the RP-AX58 has repeater, access point and media bridge modes.

  • The different modes offer different ways to use the device on a network.
  • ASUS links AiMesh features to compatible ASUS devices. Advertised speeds and coverage claims aren’t measurements taken in a narrow hallway.

devolo

According to devolo, the WiFi 6 Repeater 3000 is a plug-in repeater with gigabit LAN and access point mode.

  • devolo says it can be set up using a button, app or web interface.
  • Mesh compatibility is described for use with other devolo Wi-Fi products. An advertised speed of up to 3000 Mbps doesn’t tell you what speed you’ll get at home.

Joybuy products for this situation

This selection includes products for one wireless repeater, a wired access point and mesh Wi-Fi points.

Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

An option for adding one extra wireless Wi-Fi point in a spot with weak coverage.

The product name specifies the black version.

View at Joybuy
TP-Link EAP725-Wall access point

TP-Link EAP725-Wall

A good fit for a wired access point setup when a network cable can reach the installation spot.

The product name specifies 5012 Mbit/s and Power over Ethernet (PoE); these aren’t speeds measured where you watch.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

May suit a wired access point setup; the product description also mentions a range extender mode.

The product name specifies N up to 300 Mbps, two antennas, WPS and Passive PoE.

To use it as a wired access point, you’ll need a network cable running to the installation spot.

View at Joybuy
TP-Link Omada EAP613 access point

TP-Link Omada EAP613

A good fit for a wired access point setup if you can run a network cable to the chosen spot.

The product name specifies 1775 Mbps and Power over Ethernet (PoE).

To use it as a wired access point, you’ll need a network cable running to the installation spot.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 (2-pack)

A mesh option with two points for situations where one plug-in point is difficult to position, or coverage is needed in several places.

The product name specifies dual-band (2.4 GHz/5 GHz) and Wi-Fi 6 (802.11ax).

Two mesh points may be more equipment than you need to cover just one spot where you watch.

View at Joybuy

Frequently asked questions

How can I check whether the hallway, rather than my internet connection, is the problem?

Measure the connection next to your playback device and compare reception in different spots. Also try using a computer connected to the router by network cable. Consumentenbond suggests this as a way to tell connection problems apart from Wi-Fi issues.

Where should I put a repeater if the hallway is narrow?

Choose a spot where the repeater still gets a good signal from the router, with as few obstacles in between as possible. Consumentenbond suggests using a signal indicator or setup app as a guide. Also check that the device fits by the socket and doesn’t get in the way.

Does using an Ethernet cable from the repeater to the TV make the whole connection wired?

No. If the repeater connects wirelessly, only the section between the repeater and the TV is wired. For a wired connection back to the router, you’ll need a device with access point mode and a network cable running to it.

What should I consider when it comes to ongoing costs and maintenance?

Check information about energy use, updates and support for the model you’re considering. Consumentenbond includes energy use and security in its assessment of Wi-Fi boosters. Actual power consumption and costs depend on the device and how you use it.

Do I need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, home Wi-Fi is licence-free if you use the designated frequencies and comply with the conditions of use. Radio equipment sold in the Netherlands must meet European requirements and carry the CE marking. Check this for the specific item being offered.