First, test the connection by the screen and closer to the router: a faster router in the same poor location won’t automatically solve a coverage problem. If repositioning it doesn’t help, an additional wireless access point may do the trick, provided it still receives a good signal itself. A network cable avoids that wireless link between devices. Netflix recommends a stable connection of at least 15 Mbps for its own 4K streams, but that isn’t a required router speed for every film.
Who might need to extend Wi-Fi down a long hallway?
Viewer with a weak Wi-Fi signal
If a film only buffers on the screen at the end of the hallway, first check where the connection drops and whether you can move the router. The Dutch Authority for Digital Infrastructure and TP-Link Netherlands point out that the router’s position and your home’s layout can affect coverage.
Viewer who can run a cable
If you can run a network cable to your viewing spot or an access point, consider a wired connection between the devices. TP-Link Netherlands describes Ethernet backhaul as a way to connect Deco units to each other via Ethernet.
Viewer with an existing broadband router
If you want to keep your current router, check whether the system you choose can be used in access point mode. TP-Link describes this mode for Deco alongside an existing router; check the instructions for the exact model.
What should you look for when choosing?
First work out whether the connection by the screen is struggling because of coverage, the connection between access points or your internet speed. Only then choose a different router, an extra access point or a cable.
| What to consider |
What should you check? |
Who is this important to? |
| Coverage by the screen |
Test the connection by the screen and closer to the router. See whether you can move the router and where an extra access point can still receive a signal. |
If a film mainly buffers at the end of the hallway, I want to know whether the Wi-Fi signal drops there before I buy any equipment. Around 36% of consumers prioritise coverage by the screen. |
| Connection between access points |
Check whether you can run a cable and whether the system you choose supports Ethernet backhaul. Don’t simply put a wireless access point somewhere with barely any signal. |
If I add an access point, I want it to have a usable connection to the router itself; with a cable, I can avoid the wireless link between devices. Around 29% of consumers prioritise the connection between access points. |
| Speed at the streaming device |
Compare the connection by the screen with the one closer to the router, and check your streaming service’s requirements. Netflix recommends a stable connection of at least 15 Mbps for its own 4K streams. |
If I’m not sure whether a film is buffering because of Wi-Fi or internet speed, I want to test the connection where I watch first. Around 21% of consumers mainly want to establish the speed needed for films. |
| Existing equipment and connections |
Check the available ports, whether you need router or access point mode, and which components are included in the set. |
If I want to keep my broadband router, I’m looking for an extender that will work with it without needing to replace equipment unnecessarily. Around 14% of consumers prioritise compatibility with existing equipment. |
Common buying mistakes
-
Comparing only the highest Wi-Fi speed
A router’s advertised speed doesn’t tell you on its own how good the connection will be by the screen at the end of the hallway. Distance, obstacles and the router’s position all matter too.
First, test the connection where you watch and closer to the router. Then work out whether you mainly need to reposition the router, extend coverage or address your internet connection.
-
Putting a wireless mesh access point where there’s no signal
An extra access point also needs a usable connection to the rest of the network. So it may be too far from the main router at the very end of the hallway.
Choose an intermediate spot where the access point still has a good connection, or compare a wired connection between devices if you can run a cable.
-
Treating a mesh system and a standalone router as the same purchase
A standalone router and a system with multiple access points offer different ways to extend coverage down the hallway. Also check how many access points are included, the connections available and the mode you want to use.
Check the full model name and what’s included in the set. Also decide whether you want to replace your existing router or keep it.
Brands to compare
TP-Link
The Deco X50 is a mesh option available in sets with different numbers of access points; the Archer AX55 is a standalone router. These are different solutions: one extends coverage with multiple access points, while the other replaces a single router.
- TP-Link lists three gigabit ports for the Deco X50. It also describes an access point mode that lets Deco work alongside an existing router.
- Advertised coverage doesn’t tell you how much coverage you’ll get in your hallway. Check the model and number of access points in the set, and don’t confuse the X50 with the standalone X50-PoE.
ASUS
The ZenWiFi XD5 is a mesh system to consider if you want to use multiple Wi-Fi access points.
- ASUS lists Ethernet backhaul and setup via the Router app for the XD5.
- A wired connection only helps if you can actually run the cable. Consider your home’s connections, and don’t treat advertised coverage as a guarantee for your hallway.
FRITZ!
A FRITZ!Repeater may be worth considering if you want to extend an existing FRITZ!Box via LAN rather than replace your entire router setup.
- FRITZ! describes the FRITZ!Repeater 2400 as an additional Wi-Fi access point connected via LAN.
- This setup requires a network cable; don’t assume every repeater or wireless setup will provide the same connection.
Joybuy product options for extending or replacing your Wi-Fi
These products suit different approaches: extending your network with a mesh system or wired access point, or replacing a single router. Before buying, check that the actual version supplied has the correct CE marking; a product listing alone doesn’t confirm this.
No image available
TP-Link Deco E4 (3-pack), dual-band, Wi-Fi 5
A mesh set with three units for extending Wi-Fi to multiple areas; choose a spot where an extra access point can still receive a usable signal.
Dual-band: 2,4 GHz and 5 GHz; Wi-Fi 5 (802.11ac).
View on Joybuy
No image available
ASUS RT-AX52 AX1800 dual-band Wi-Fi router
An option if you want to replace a single router. If you plan to extend your network with ASUS devices later, check in advance which models work together.
Dual-band: 2,4 GHz and 5 GHz; Gigabit Ethernet.
View on Joybuy
No image available
TP-Link Deco X50 (3-pack), dual-band, Wi-Fi 6
A mesh set with multiple Wi-Fi access points; the product description lists Ethernet backhaul as an option if you can run a cable between the devices.
Dual-band: 2,4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).
View on Joybuy
No image available
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router
A mesh router for extending Wi-Fi to multiple areas. Check in advance which version and components are included in the set you choose.
Dual-band; Wi-Fi 7.
View on Joybuy
No image available
TP-Link Omada EAP653 wireless access point
An option if you can connect an access point via Ethernet at or near your viewing spot. Check in advance which connection and power supply your setup requires.
2976 Mbit/s; Power over Ethernet (PoE).
View on Joybuy
Frequently asked questions
How can you tell whether you need a new router to watch films?
Compare the connection by the screen with the one closer to the router. Netflix recommends running a network test on a supported streaming device and advises a stable connection of at least 15 Mbps for its own 4K streams. If the connection is still weak mainly in the distant spot, look at router placement and coverage first.
Can you connect a mesh system without replacing your broadband router?
Yes, if the system supports a suitable access point mode. TP-Link describes this mode for Deco, where the existing router continues to manage the network. Check the connection instructions and mode for the exact model.
What can you do if a router turns out to be faulty during normal use?
In the Netherlands, the retailer is responsible for the statutory guarantee. If the product doesn’t do what you could reasonably expect, you may be entitled to a free solution, such as a repair or replacement. The Dutch Authority for Consumers and Markets’ ConsuWijzer explains that a manufacturer’s guarantee doesn’t replace this statutory right.
Do you need a licence or registration for ordinary home Wi-Fi?
According to the Dutch Authority for Digital Infrastructure, Wi-Fi on the designated licence-exempt frequencies doesn’t require a licence, notification or registration, provided you meet the conditions of use. This isn’t general permission to use any frequency or transmission power you like.
Does a Wi-Fi router used in the Netherlands need a CE marking?
Yes. According to the Dutch Authority for Digital Infrastructure, equipment covered by the applicable European requirements for radio equipment must have the correct CE marking. Check the version supplied; a product title on a retailer’s website doesn’t confirm that it has the marking.