Who is this guide for?

Film streamer at the end of the hallway

You have a weak Wi-Fi signal at a regular viewing spot and are looking for somewhere to place a repeater where it can still get a good signal from the router. Netflix recommends internet speeds for different picture qualities, while TP-Link explains why the repeater itself needs to be within range of the router.

Viewer with the option to run a cable

You can run an Ethernet cable towards your viewing spot and are looking for an access point solution if the wireless signal through the hallway isn’t reliable. TP-Link describes access point mode with an Ethernet cable as an alternative.

Viewer who wants to find the cause first

You’re not sure whether Wi-Fi, the router’s position or your internet connection is affecting your streaming, and want to find out first. When dealing with slow internet, the Consumers’ Association recommends checking your connection speed and highlights obstacles that can interfere with the signal.

What should you look for when buying?

Wireless repeater

Choose this option: if you have a spot between the router and your viewing area where the repeater can still receive a good signal from the router.

Bear in mind: obstacles and positioning matter; the maximum Wi-Fi speed stated on the packaging doesn’t tell you what speed you’ll get at your viewing spot.

Access point connected by Ethernet cable

Choose this option: if you can run a cable to a suitable spot closer to the screen and the wireless connection remains weak along the way.

Bear in mind: you’ll need a route for the cable, and the model you choose must have access point mode and a suitable Ethernet port.

A repeater still needs to be within range of the router. That’s why TP-Link recommends placing it within range and suggests connecting an access point by cable as an alternative when obstacles prevent a stable wireless connection.

What to consider What should you check? Who is this important for?
Position and range Check for a power socket, enough space to pass through and a signal at the spot where you plan to place the repeater. If I want to place a repeater in or near the narrow hallway, it needs to get a good signal there. Around 38% of consumers prioritise finding a practical spot with enough coverage.
Streaming stability Test the connection on your playback device and check which picture quality your streaming service supports. If I want to watch a film in a particular spot, I need to know whether the connection is stable enough there. Around 31% of consumers put streaming stability first.
Cable route Check whether you can run an Ethernet cable and whether the model has access point mode. If the wireless connection through the hallway isn’t strong enough, I want to know whether I can run a cable to an access point. Around 16% of consumers prioritise a wired connection.
Cause of dropouts Compare the connection over Ethernet with the one at your viewing spot, and check the router’s position. If I don’t know whether the problem is Wi-Fi or my internet connection, I want to find out before buying anything. Around 15% of consumers prioritise diagnosing the issue before making a purchase.

Common buying mistakes

  • Placing the repeater in an area with no signal

    A repeater needs to receive the signal from the router itself. Obstacles can weaken that signal, so the spot next to the TV won’t necessarily be suitable.

    First, try a spot between the router and your viewing area where the repeater still gets a good signal. If that doesn’t work and you can run a cable, check whether access point mode is an option.

  • Assuming the maximum Wi-Fi speed is your streaming speed

    The stated maximum isn’t a measurement of the connection where you watch. Your internet speed and the repeater’s position also play a part.

    Test the connection on the device you use to watch, and compare it with a test over Ethernet if needed.

  • Buying a repeater when your internet connection is slow

    An extra Wi-Fi access point won’t necessarily fix a problem with your internet connection. The Consumers’ Association recommends checking your speed if your internet is slow.

    First, test the connection over Ethernet. Then look at the router’s position or contact your provider if necessary.

  • Assuming it’s compatible with Mesh

    Mesh features depend on the exact product and router. TP-Link specifies OneMesh for the RE705X when used with a OneMesh router.

    Check compatibility between the exact router and repeater models. Consider the standard repeater function separately from Mesh.

Brands to consider

TP-Link

TP-Link describes the RE705X as a Wi-Fi 6 repeater with a Gigabit Ethernet port and access point mode.

  • The Ethernet port and access point mode make a wired connection possible.
  • OneMesh requires a compatible OneMesh router; the stated wireless speeds don’t show what you’ll get at your viewing spot.

NETGEAR

NETGEAR describes the EAX15 as a Wi-Fi 6 plug-in repeater with internal antennas and a Gigabit Ethernet port.

  • Internal antennas may be practical where protruding antennas would get in the way in a narrow passage.
  • The design and stated speeds don’t confirm how well the repeater will suit your home or handle streaming.

devolo

devolo describes the WiFi 6 Repeater 3000 as suitable for repeater and access point use, with a Gigabit LAN connection.

  • The stated operating modes let you choose between wireless positioning and a wired connection.
  • The stated maximum speed isn’t a measured speed at your screen; also check that the exact model will physically fit.

Products for wireless and wired Wi-Fi

This selection of Joybuy products includes a wireless Wi-Fi repeater and an access point for a wired connection to your viewing spot.

Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

A good fit for a wireless coverage extension if you can first place the repeater within range of the router.

The product description lists 2.4 GHz, up to 300 Mbps and two external antennas. These aren’t measured performance figures for your viewing spot.

Only move the device elsewhere if it can still receive a signal from the router in that location.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi network extender

TP-Link TL-WA801N

The access point mode described is useful if you can run an Ethernet cable to a suitable spot closer to the screen.

The product specifications list 2.4 GHz, up to 300 Mbit/s, Ethernet 10/100 Mbit/s and Passive PoE. These are product specifications, not measured streaming performance.

To use it as an access point, you’ll need to run a cable to the device.

View at Joybuy

Frequently asked questions

Where should you place a repeater in a narrow hallway?

Place it between the router and the area with a weak signal, somewhere the repeater itself can still receive a good signal from the router. Check the signal indicator and test the connection by the screen; walls may mean you need to place it closer to the router.

How can you check whether a repeater will solve your film-streaming problem?

First, test your internet connection over Ethernet and compare it with the connection at your viewing spot. Netflix recommends 5 Mbps or higher for FHD and 15 Mbps or higher for 4K for a stable connection. These are Netflix’s recommendations, not guaranteed repeater performance.

Can you use an Ethernet cable if Wi-Fi doesn’t work well through the hallway?

Yes, if you can run a cable from your network and the model you choose has access point mode and a suitable Ethernet port. Check the features of the exact model before you buy.

Does OneMesh work with every TP-Link router?

No. TP-Link specifies OneMesh for the RE705X when used with a OneMesh router. Check whether your exact router is compatible, and treat the standard repeater function separately from the Mesh features.

What should you check about product regulations when buying in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment sold in Europe must meet the applicable requirements and carry the correct CE marking. Check the specific item on offer; a model name alone doesn’t confirm that the item carries the marking.