Who is this choice relevant to?

Family with a weak spot at the back of the house

This family wants to watch or share family videos at the end of the hallway and is looking for a spot where an extra Wi-Fi node can still receive a usable signal. The Consumentenbond recommends placing a range extender closer to the middle of the house if coverage is weak at the back.

Family that frequently sends videos

This family uses several devices at once or sends large video files. It’s useful to distinguish the internet connection’s upload speed from the Wi-Fi connection inside your home; the Consumentenbond points out that upload capacity affects how quickly you can send videos.

Resident who can’t run a cable

This resident doesn’t want to run a new network cable and is comparing wireless mesh with powerline using existing sockets. Devolo describes Magic 2 WiFi next as a powerline Wi-Fi option; how well it works depends on your own wiring and sockets.

What should you consider when choosing?

Reposition your existing router

Choose this when: the router is in a utility cupboard or Wi-Fi is weak even closer to it; compare a wired test with Wi-Fi at the end of the hallway.

Trade-off: repositioning the router may require running cables and won’t always solve a weak signal in a distant spot.

Wired access point or mesh node

Choose this when: you can run Ethernet to a suitable location and want a stable connection there for video files.

Trade-off: running a cable takes work; also check the ports you’ll need and whether the device has an access point mode.

Wireless mesh

Choose this when: running a cable isn’t practical and you can place a node somewhere the original Wi-Fi signal is still strong.

Trade-off: distance, obstacles and network use can affect the wireless connection between nodes; a higher Wi-Fi version number doesn’t guarantee better coverage.

Powerline with Wi-Fi

Choose this when: running a cable isn’t practical and a well-placed wireless node can’t maintain a strong enough connection.

Trade-off: test the adapters in the sockets you plan to use; devolo warns of possible interference with certain VDSL profiles.

What to consider What should you check? Who should pay particular attention?
Coverage at the end of the hallway Measure the signal where you watch videos and at possible locations for a node. The Consumentenbond recommends placing a range extender closer to the middle if coverage is weak at the back. If I want to watch videos at the end of the hallway, the signal needs to be usable right there. Around 36% of consumers say coverage in that spot is their top priority when buying.
Sending and watching videos Test the internet connection using a cable and try transferring a video at the furthest point; check the Ethernet options for your source device and Wi-Fi nodes. When I send large videos while other devices are in use, I want to know whether both the upload connection and Wi-Fi at the furthest point are up to the job. Around 29% of consumers prioritise reliable video transfers.
Connecting to your provider’s router Check whether the model has an access point mode, how it connects to your provider’s device and how updates are managed. I want to keep using my existing provider’s router and manage the extra equipment easily. Around 21% of consumers prioritise a simple, secure connection.
Installing without a network cable Test possible locations for a wireless mesh node or the sockets you’d use for powerline; for powerline, also check adapter compatibility. If I can’t run a network cable, I want a solution that works from a suitable midway location or using the sockets at home. Around 14% of consumers give top priority to an installation that doesn’t require a new cable.

Common pitfalls

  • Comparing theoretical Wi-Fi speeds only

    A higher speed specification doesn’t tell you whether the signal can reach the end of the hallway through distance and obstacles. The Consumentenbond cautions that the Wi-Fi version alone doesn’t indicate performance.

    Compare the connection where you’ll actually use it and check where you could place an extra node.

  • Placing a wireless node in a dead zone

    An extra node can only extend the signal if it still has a usable connection to the first node.

    Try a spot between the router and the end of the hallway; choose a wired connection where possible.

  • Assuming powerline is a guaranteed alternative to Ethernet

    How well it works over your home’s electrical wiring depends on the setup. Devolo also warns of possible interference with certain VDSL connections.

    Test the adapters in the sockets you intend to use and, if you have a relevant VDSL connection, check compatibility.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range available in sets of one, two or three nodes. TP-Link lists three gigabit ports per node.

  • The ports and Deco app may be useful if you want to expand your setup later; check the set size and placement in advance.
  • The advertised coverage and radio speed aren’t measurements taken in your hallway. Decide how many nodes you need based on where you can place them.

ASUS

ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh option. ASUS lists two 2.5-gigabit ports and wired backhaul for this model.

  • The wired connection options are useful if you want to connect nodes using Ethernet.
  • The Consumentenbond notes that a Wi-Fi version alone doesn’t guarantee better performance. Check the exact set and configuration too.

FRITZ!

The FRITZ!Mesh Set 1700 is a multi-node option; the manufacturer describes a set containing three Repeaters 1700.

  • The manufacturer lists guest access and regular updates as features of the range.
  • A three-node set isn’t automatically necessary for every long hallway. It hasn’t been established that it works better than a well-placed wired alternative.

devolo

Magic 2 WiFi next is a powerline Wi-Fi option for homes where running a cable is difficult or wireless nodes can’t reach each other reliably.

  • devolo lists two additional gigabit LAN ports and compatibility within the Magic range.
  • The manufacturer says it isn’t compatible with the dLAN range and warns of possible interference with certain VDSL profiles. Test it with your own connection.

Joybuy products

These products are TP-Link Deco mesh sets with two or three units. Depending on the model, features include Ethernet backhaul or PoE.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A mesh set with two nodes, ideal if you want to extend Wi-Fi to another area of your home.

The product description lists tri-band Wi-Fi and wired or wireless backhaul. WAN/LAN ports: 10 Gbps, 2,5 Gbps and 1 Gbps.

View at Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

Three mesh nodes may suit you if you want to cover several areas of your home; plan where to place them based on coverage in those spots.

Wi-Fi 6; three gigabit ports per unit; set-up and management via the Deco app.

View at Joybuy
TP-Link Deco X50-PoE (2-pack)

TP-Link Deco X50-PoE (2-pack)

A mesh set with two units for an installation where PoE is useful; check in advance that the connection options suit your set-up.

Wi-Fi 6; PoE support and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco XE75 (3-pack)

TP-Link Deco XE75 (3-pack)

A mesh set with three units; check whether you need several nodes for the hallway and other areas you want to cover.

Tri-band Wi-Fi 6E; three gigabit ports per unit; the product description lists guest access.

View at Joybuy
TP-Link Deco X50 (2-pack)

TP-Link Deco X50 (2-pack)

A mesh set with two units, ideal if you want to add a node and can test the connection between the nodes.

Wi-Fi 6; Ethernet backhaul and three gigabit ports per unit.

View at Joybuy

Frequently asked questions

Should you buy a new router straight away if videos keep buffering at the back of the house?

No. First, test your internet connection using a network cable and try moving your existing router to a better position. If the signal is weak mainly at the end of the hallway, look into adding an access point or Wi-Fi node.

Where should you place a wireless mesh node in a long hallway?

Don’t place it in the spot with no reception; place it somewhere in between where it can still connect well to the first node. The Consumentenbond recommends moving a node closer to the middle of the house if coverage is weak at the back.

Can you use your own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you have the freedom to choose your router. If you connect your own equipment directly to your provider’s network, connection and security requirements apply; ask your provider for the necessary settings. Adding a Wi-Fi node behind your existing modem is a different installation scenario.

Which product requirements apply to a Wi-Fi router in the Netherlands?

Radio equipment placed on the Dutch market must meet the applicable European radio equipment requirements and carry the required CE marking. The Rijksinspectie Digitale Infrastructuur specifically lists Wi-Fi routers as equipment that must display the correct CE marking; check the marking on the product you receive.

What maintenance is important after installation?

Keep your router and Wi-Fi nodes up to date, use a strong Wi-Fi password and check your security settings. VeiligInternetten stresses that updates remain important for keeping your router secure.