Who are these models for?

Players with their own effects pedals

You want to hear how your physical pedals respond before an amp simulation, and perhaps place some effects after it. For the IR-2, BOSS documents a mono/stereo effects loop for effects including modulation, delay and reverb after the simulation.

Quiet practice at home

You want to practise without a speaker and need a wired headphone socket and a suitable output tone for assessing effects. VOX specifies a 3.5 mm stereo headphone output for the amPlug 3; the channel sound varies between versions.

Players who want to explore built-in effects

You want to compare different amp and effects settings through headphones. Fender specifies 25 amp models and 25 effects models for the Mustang Micro Plus; NUX documents editable effects blocks for the Mighty Plug Pro.

What should you look for?

First decide whether you want to test your own pedals in the signal chain or mainly listen to built-in sounds. Then check the connections, controls and power supply for the exact model.

What to consider What should you check? Who is this important for?
Connections and pedal placement Check the instrument input, wired headphone output and, if you need one, a documented effects loop. BOSS describes a loop on the IR-2 for certain effects after the amp simulation. If I want to hear my physical pedals at a specific point in the chain, I check those connections first. Around 36% of consumers give the pedal chain top priority.
Tone for quiet practice Compare the clean channel on the exact version and check for a wired headphone socket and volume control. VOX notes that channels vary between amPlug 3 versions. If I want to practise quietly and assess an effect with a suitable amp tone, I look at the channel and headphone connection. Around 29% of consumers prioritise quiet monitoring.
Built-in effects Check which settings can be adjusted on the device and which need to be edited in an app. Fender lists 100 preset slots for the Mustang Micro Plus; NUX documents movable effects blocks for the Mighty Plug Pro. If I want to try different built-in sounds and effects orders without separate pedals, the controls matter. Around 21% of consumers give built-in effects top priority.
Power and essentials Check the power requirements and what’s included in the box. VOX specifies two AAA batteries for the amPlug 3; the BOSS IR-2 product page for the Netherlands says the compatible mains adaptor is not included. If I want to put together a complete set-up, I check in advance which power supplies and cables I already have. Around 14% of consumers prioritise power and additional essentials.

What to watch out for when buying

  • Confusing built-in effects with testing your own pedals

    A device with built-in effects won’t automatically show you how a physical pedal sounds before or after an amp simulation.

    Map out the order you want, for example guitar–pedals–amp/cabinet–headphones. Then check that the device has the inputs you need and, if required, an effects loop.

  • Assuming every amPlug 3 version has the same clean channel

    VOX describes different channel characteristics for each version, so the output tone may vary when you’re assessing a pedal.

    Check the channels on the exact version and decide whether the clean channel is right for your test.

  • Leaving power and set-up checks until after you buy

    Power requirements vary by model. VOX also warns that you should remove a connected amPlug 3 before leaning your guitar against a wall or laying it down, to avoid damage from contact.

    Check the power requirements and included accessories. Remove a plug-in device from your guitar before putting it away.

Brands to compare

BOSS

The IR-2 is a pedal-style amp and cabinet simulator for players who want to use their existing physical pedals in the signal chain.

  • BOSS documents a headphone output and a mono/stereo loop for effects after the amp simulation.
  • The compatible mains adaptor is not included, according to the product page for the Netherlands; product specifications are not an independent sound test.

VOX

The amPlug 3 range offers a plug-in way to practise with guitar and amp sounds that vary by version.

  • VOX specifies two channels, built-in effects and power from two AAA batteries for each version.
  • The integrated plug needs consideration when using external pedals and when putting your guitar down.

Fender

The Mustang Micro Plus is designed for players who want to compare different built-in amp and effects settings through wired headphones.

  • Fender lists 25 amp models, 25 effects models and 100 preset slots.
  • Built-in models are no substitute for testing your own physical pedal at the intended point in the signal chain.

NUX

The Mighty Plug Pro is a plug-in model for players who want to explore built-in effects and effects orders.

  • NUX documents editable effects blocks and cabinet IRs; the product page for the Netherlands lists a 3.5 mm headphone output.
  • Editing requires you to get to grips with the MightyAmp and Mighty Editor controls. Manufacturer claims about sound are not an independent assessment.

Valeton

The Rushead Max is a plug-in option with switches and dials for different amp and effects settings.

  • Valeton lists a USB-rechargeable battery with up to around five hours of use; the product page for the Netherlands specifies a 3.5 mm headphone output.
  • The stated battery life is a product specification, not a measurement carried out independently.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I plug headphones straight into my electric guitar?

For amplified practice, use a suitable device between your guitar and a pair of wired headphones. Bax Music describes a headphone practice amp as a way to connect headphones to an electric guitar. If you’re using your own pedal, also check that the connections suit your signal chain.

Where should I place delay or reverb when testing my own pedals?

It depends on which point in the signal chain you want to assess. BOSS documents an instrument input on the IR-2 for pedals before the amp simulation, and a loop for effects including delay and reverb afterwards. For another model, check that it has the connections you need.

What should I look out for with a plug-in VOX amPlug 3?

First, check the exact version and the channel you want to use. According to the VOX manual, you connect the amPlug 3 to your guitar and headphones; remove it from the guitar before leaning it against a wall or laying it down.

How can I practise responsibly with headphones?

Start at a low volume and take breaks. The World Health Organization points out that both sound level and listening duration and frequency contribute to the risk of hearing damage; a volume setting does not measure the sound level in your headphones.