Who is this suitable for?

Retoucher with limited socket space

You edit scans on an existing computer and want pen input without needing an additional power adapter as your starting point. Check the connection and power requirements for the specific model; for example, Wacom describes a USB connection for the One by Wacom.

Frequent scan retoucher

You regularly correct small dust spots and want a work area and controls suited to repeated pointing. Adobe describes the Spot Healing Brush for small dust spots in scanned photos; the tablet provides the pen input, not the correction itself.

Retoucher who wants to work on the image

You want to position the pen over the scan on screen and can check whether your computer has the video and power capabilities needed for a pen display. Wacom specifies particular USB-C requirements for the Wacom One 14.

What should you look for when choosing?

Screenless graphics tablet

Suitable when: you view the scan on your existing computer screen and want to point with a pen.

Bear in mind: you don’t look at the tablet surface itself; check the computer port and power requirements for each model.

Wireless graphics tablet

Suitable when: you’d rather not have a cable between the tablet and computer while you work.

Bear in mind: wireless use doesn’t mean you can skip charging. Xencelabs quotes up to 16 hours of use after a full charge for the Pen Tablet Small; this is the manufacturer’s stated figure.

Pen display

Suitable when: you want to work directly on the scan on screen and your computer supports the required connections.

Bear in mind: a Wacom One 14 requires video, data and 7.5 W Power Delivery for a single USB-C cable; the converter setup described requires a power adapter.

What to consider What should you check? Who is this important for?
Power without an extra socket Check the cable, computer port and power requirements for each model. For a single USB-C connection, Wacom also specifies video, data and 7.5 W Power Delivery for the Wacom One 14. If I have few spare sockets, I want to know in advance whether my computer can connect to and power the tablet. Around 36% of consumers say that avoiding an extra socket is their top priority.
Correcting dust locally Check whether your retouching software supports pen input and the correction feature you want. Adobe describes the Spot Healing Brush for small dust spots in scanned photos. If I mainly want to target small dust spots, the software is just as important as the pen. Around 29% of consumers prioritise local scan retouching.
Work area and controls Compare the active area with the space available on your desk. XPPen lists an active area of 177,8 × 111,1 mm for the Deco mini7; Huion lists 160 × 100 mm for the Inspiroy H640P. For repeated corrections, I want a work area and customisable keys that suit my movements without taking up unnecessary space. Around 21% of consumers put work area and controls first.
Working directly on the scan For the exact pen display, check that your computer provides video, data and sufficient power via USB-C. Wacom specifies 7.5 W Power Delivery for the Wacom One 14. If I’d rather position the pen over the image on screen, I want to know first whether my computer is suitable and whether I might need a separate adapter. Around 14% of consumers prioritise working directly on the image.

Common pitfalls

  • Assuming USB-C guarantees a single-cable setup

    A USB-C plug alone doesn’t mean a pen display will work without a separate power supply. For the Wacom One 14, Wacom also specifies video, data and sufficient power as requirements.

    Compare your computer’s exact port specifications with those of the pen display before choosing.

  • Assuming more pressure levels mean better dust removal

    Pressure sensitivity describes a pen feature, but it doesn’t prove that software will correct dust spots more effectively. Adobe notes that automatic correction also depends on the texture and colour around the spot.

    Choose based first on connectivity, compatible software and a suitable work area; don’t treat pressure levels as proof of better retouching results.

  • Assuming a wireless tablet never needs charging

    A tablet with a battery needs to be charged for wireless use. The battery life quoted by Xencelabs for the Pen Tablet Small applies after a full charge and is the manufacturer’s stated figure.

    Check whether charging fits around when you edit scans and whether you’ll have a suitable USB connection available at the time.

Relevant brands for this choice

Wacom

Offers both graphics tablets for use with an existing screen and pen displays for pen input directly on the image.

  • Wacom describes the USB connection and driver installation for the One by Wacom.
  • A single cable can work with the Wacom One 14 if your computer meets the stated video, data and power requirements.
  • The alternative connection setup described for the Wacom One 14 requires a converter and power adapter.

XPPen

The wired Deco mini7 is a graphics tablet for use with an existing computer screen.

  • XPPen lists an active area of 177,8 × 111,1 mm and eight shortcut keys for the Deco mini7.
  • Check the exact version, cable and operating system support; a software listing doesn’t mean your computer setup has been tested.

Huion

The Inspiroy H640P is a compact graphics tablet with a wired connection.

  • Huion lists an active area of 160 × 100 mm and six programmable keys.
  • The stated connection is Micro-USB; check which cable type is included with the version on offer.

Xencelabs

The Pen Tablet Small is a wireless option for anyone who wants to avoid a cable while working.

  • Xencelabs lists a built-in battery and up to 16 hours of wireless use after a full charge.
  • This is the manufacturer’s stated figure, not an independently measured battery life; charging is still required.

Joybuy products

The Joybuy products below are graphics tablets for pen input when retouching scans on an existing computer; you’ll need suitable software to edit the scans.

Wacom Intuos Pro Pen Tablet Medium

Wacom Intuos Pro Medium

For pen input when retouching on an existing computer screen; dust correction is done in software.

Active area of 263 × 148 mm and 8.192 pressure levels.

USB-C and Bluetooth; the battery must be charged for wireless use.

Joybuy
Wacom Intuos Pro Large with Pro Pen 3

Wacom Intuos Pro Large with Pro Pen 3

For pen input when retouching on an existing computer screen; scan editing requires suitable software.

Active area of 349 × 195 mm and 8.192 pressure levels.

USB-C and Bluetooth; the battery must be charged for wireless use.

Joybuy
Wacom Intuos S Black

Wacom Intuos S Black

For compact pen input on an existing computer; dust correction is done in editing software.

Active area of 152 × 95 mm, 4.096 pressure levels and four ExpressKeys.

The stated connection is wired via USB and USB-powered.

Joybuy
Wacom Intuos Pro Pen Tablet Small

Wacom Intuos Pro Small

For pen input when retouching on an existing computer screen; the correction itself is done in software.

Active area of 187 × 105 mm, 8.192 pressure levels and four ExpressKeys.

USB-C and Bluetooth; the battery must be charged for wireless use.

Joybuy
Wacom One Pen Tablet Small S

Wacom One Pen Tablet Small S

For pen input when retouching on a computer; the scan is edited in suitable software.

A6 size (approximately 148 × 105 mm) and a pen that doesn’t need charging.

The stated connections are USB-C and Bluetooth.

Joybuy

Frequently asked questions

Does a graphics tablet remove dust from a scan by itself?

No. A tablet provides pen input; you correct the scan in suitable software. Adobe describes the Spot Healing Brush for small dust spots in scanned photos and lists the Healing Brush as an option when you want more control over the source pixels.

How can I start making local corrections without overwriting the original straight away?

Zoom in and, if you like, work in Photoshop on a blank layer with ‘Sample All Layers’, as Adobe describes. Automatic correction works best when the area around the spot has suitable texture and colour.

Does a pen display with USB-C always avoid the need for a separate socket?

No. For the Wacom One 14, Wacom specifies video via DisplayPort Alt Mode, data and 7.5 W (5 V/1.5 A) Power Delivery as requirements for a single USB-C connection. The converter connection described requires a power adapter.

What should I look for if I often make small corrections?

Compare the active work area with the space on your desk and check that the available keys suit the way you work. Also check whether your retouching software supports the pen input you need; the tablet doesn’t make corrections by itself.