Who is this choice relevant to?

Maker comparing glaze colours

If you record several firing tests, you’ll want to assess colour differences without confusing them with changes in lighting. Consistent lighting and a deliberately set white balance are important here. Canon Europe explains why you may need to adjust white balance in challenging lighting conditions.

Maker with glossy test pieces

You’ll want to show the gloss and surface without a large reflection obscuring the glaze detail that matters. Orbitvu Nederland and broncolor explain how reflections and the position of light shapers affect photos of glossy ceramics.

Maker sharing a photography table

You set up temporarily for a photo session, then need to put the light, light shaper and stand away afterwards. Size and setup are therefore practical considerations. Aputure, amaran and ORANGEMONKIE provide details of different folding solutions.

What should you look for?

Separate rectangular softbox

Best when: you photograph the same test pieces from different angles and want to control where the light reflection falls.

Consider: you’ll need a suitable light and stand. A softbox alone doesn’t guarantee accurate colour reproduction.

Quick-fold softbox

Best when: you want to clear your workspace quickly after a photo session and can use a separate light source.

Consider: the shape of the light source affects the visible reflection, so check it on your own glaze. The light and support also need to be considered separately.

Folding light tent

Best when: you mainly photograph small test pieces on one table and want a more enclosed setup.

Consider: the dimensions determine which pieces and camera angles will fit, and you have less freedom to position individual reflections. For an electrically powered model, check the product information, power supply and plug for use in the Netherlands.

What to consider What to look for when buying Who is this important for?
Colour consistency Check whether you can position the light source consistently and set the white balance deliberately. When I compare firing tests side by side, I don’t want to confuse colour differences with changes in lighting. Around 33% of consumers prioritise consistent colour reproduction.
Reflections and detail Check whether you can move the light source and whether a diffuser or grid is included with the model. With glossy test pieces, I want to show the sheen without the light source obscuring details. Around 27% of consumers prioritise reflection control.
Setting up and storage Compare the open dimensions, packed size and space needed for the light and stand. If I need to clear the photography table after use, I want to know how much room the complete setup takes up. Around 20% of consumers prioritise tidying away and saving space.
Complete setup Check the fitting, light, power supply, stand and what’s included in the box. If I need a usable setup straight away, I want to know in advance which parts are still missing. Around 20% of consumers prioritise a complete kit.

Common mistakes

  • Assuming a separate softbox is a complete lighting kit

    The Godox, Aputure and amaran Bowens models mentioned are light shapers. You’ll need a suitable light source separately; Foldio3 is a light tent with built-in lighting.

    Compare the contents of the box and the fitting for the exact model with the light you already have or plan to use.

  • Assuming softer light will automatically give you the right glaze colour

    Diffusion and white balance do different things: a diffuser changes the light, while white balance helps control colour casts caused by lighting conditions. Canon Europe explains how to set white balance in challenging lighting conditions.

    Keep the lighting as consistent as possible between test pieces, and check the white balance when the ambient light changes.

  • Trying to remove every glossy spot by adding more lights

    With glossy objects, the position of the light shaper partly determines which reflection the camera sees. More light sources can also create extra reflections and require more room to set up.

    First, move one light source and assess a test piece to see whether the remaining sheen helps show the surface.

  • Choosing a light tent based only on the size of the test piece

    In a shared workspace, you also need to consider the camera angle, table space and storage after use.

    Measure the available table space and check both the open and folded dimensions of the specific model.

Brands to consider

Godox

Godox describes the SB-FW6060 as a 60 × 60 cm rectangular softbox with a Bowens fitting.

  • The product specifications state its shape, size and fitting.
  • It’s a light shaper, not a complete lighting kit; the specifications don’t give measured colour performance for glaze photography.

Aputure

Aputure describes the Quick Dome 60 as a 60 cm round Bowens softbox with a quick-folding mechanism.

  • The model is listed as including diffusion and a grid.
  • The softbox doesn’t replace a suitable light or support; the manufacturer’s information isn’t an independent performance test.

amaran

amaran describes the Octa Dome 60 as a foldable 60 cm octagonal Bowens softbox.

  • According to amaran, a diffuser, inner diffuser, grid and carry bag are included; its stated folded dimensions are 59 × 20,5 × 6,5 cm.
  • The light isn’t included. The described reflection shape doesn’t guarantee a particular result with every glaze.

SmallRig

SmallRig describes the RA-D55 as a 55 cm Bowens softbox.

  • The manual states its size and compatibility with certain Bowens lights.
  • Check that the softbox physically fits your light, and that your stand and available space are suitable.

ORANGEMONKIE

ORANGEMONKIE describes Foldio3 as a folding light tent with built-in lighting. It’s an alternative to a separate softbox when your subject fits inside it.

  • The manufacturer provides dimensions and information about the lighting and box contents.
  • For a specific electrically powered model, check the plug, power supply and product information for use in the Netherlands.

Joybuy products

Related products coming soon.

Frequently asked questions

Is one softbox enough to photograph glaze tests?

One movable light source can be a good starting point. For a glossy test piece, first try changing the position of the light and, if needed, use a reflector or flag. Adding more lights isn’t automatically the answer to unwanted reflections.

How can you keep colours consistent between photo sessions?

Keep the lighting as consistent as possible and set the white balance deliberately when the ambient light changes. Compare the photo with the test piece; a softbox won’t set your camera’s white balance for you.

Can you use a Bowens softbox without a light?

No. A separate Bowens softbox shapes the light from a suitable, separate light source. Before buying, also check that your stand is suitable and see which diffusers and grids are included with the exact model.

What should you look for in the safety of an electric lighting kit in the Netherlands?

Check the product information, power supply and applicable safety markings for the specific light or light tent. The Netherlands Food and Consumer Product Safety Authority explains that CE requirements vary by product category. An electrically powered model must therefore be assessed separately; a separate, non-electrical diffuser isn’t automatically subject to the same requirements.

Can you return a kit bought online if the setup doesn’t fit?

For an online purchase from a business in the Netherlands, you generally have a statutory 14-day cooling-off period after delivery, subject to exceptions, according to the Government of the Netherlands and the Authority for Consumers and Markets. Check the box contents and returns information in advance; the cooling-off period doesn’t guarantee that the setup will fit on your photography table.