Start with the direction of the light: position an adjustable panel beside or slightly behind the glass, then check in a test shot whether the outline is visible while the background stays dark. Next, choose according to your workspace, the level of diffusion you want, adjustable lighting and power supply. Soft, broad lighting alone can make fine engravings less visible.
Who is this choice relevant to?
Photographers of clear glass
If you want glass edges to stand out against black, controlling the light angle and reflections can help. A12 Product Photography describes backlighting as a way to make an outline visible; broncolor discusses lighting engraved glass.
Sellers of ornament ranges
If you’re photographing a range of products, you can use consistent camera settings and similar lighting setups to compare test shots side by side. The specifications for Godox, amaran and NEEWER describe adjustable colour temperature for the models mentioned.
Photographers with a small workspace
If space is limited, you’ll need to fit the panel, light modifier, mounting equipment and power supply into your setup. So check the dimensions and mounting options, as well as what’s included with the version you choose.
What should you look for when choosing?
First decide what kind of light you need on the glass, then compare colour settings, space requirements and the power supply and mounting equipment you already have.
| What to consider |
What to look for |
Who is this important for? |
| Visible glass edges |
Check whether you can adjust the light angle and flag the light; assess reflections and the background in a test shot. |
If I want to show the outline of clear glass without lighting up the dark background, I start by positioning the light. Around 36% of consumers prioritise visible glass edges. |
| Consistent colour and lighting |
Check whether you can adjust the colour temperature and brightness; compare test shots using the same camera settings and white balance. |
When photographing a range of ornaments, I want to be able to repeat my lighting settings and assess colours under similar conditions. Around 29% of consumers prioritise consistency. |
| Space for the panel and light modifier |
Measure the available space and check the dimensions and mounting options for the panel and any light modifier. |
In a small workspace, I need to be able to position the panel beside or behind the ornament without the light modifier getting in the way. Around 21% of consumers say limited setup space is their main concern. |
| Power supply and what’s included |
Check exactly which adapter, battery, stand and light modifier are included with that version. |
If I want to connect the light directly to my fixed or portable setup, I want to know in advance which parts I already have and what comes with the kit. Around 14% of consumers prioritise a complete, ready-to-use kit. |
Common buying mistakes
-
Choosing a large, soft light source simply because the object is made of glass
Soft, general lighting can make fine engravings less visible. So check both the reflections along the edge and the small details in a test shot.
Test your setup before choosing a light modifier. If you find that focused accent lighting is needed, you may need to add another component to your setup.
-
Assuming a battery-compatible panel comes with a battery or tripod
Power supplies and included accessories vary by model and version. NEEWER lists an adapter for the NL660, states that NP-F batteries are not included, and offers versions with and without a tripod.
Compare what’s included with the exact version you’re considering against your planned setup and the equipment you already have.
-
Assuming a CRI figure guarantees the colour in the final photo
A CRI rating is a specification for the light, not a measurement of the complete camera and lighting setup.
Compare test shots using the same camera settings and white balance.
Brands to compare
Godox
The LDX50Bi is a bi-colour panel worth comparing if you’re looking for adjustable white light and a removable diffuser.
- Godox lists a colour temperature of 2800–6500 K, a maximum output of 65 W and an average CRI of at least 96 for the LDX50Bi. These are manufacturer specifications, not measurements of photos of ornaments.
- A compatible battery is optional. Check the exact kit and power supply you’re considering.
NEEWER
The NL660 is a bi-colour panel with adjustable barn doors, allowing you to position the light beside the glass.
- NEEWER lists a colour temperature of 3200–5600 K, dimming and an included adapter for the NL660.
- The manufacturer offers versions with and without a tripod and states that NP-F batteries are not included. Check what comes with the version you choose.
amaran
The P60x is a bi-colour panel; the listed kit contents include a softbox and a light-control grid.
- amaran lists an adjustable range of 3200–6500 K and a CRI of at least 95.
- Check that the version you’re looking at comes with the same kit contents.
Nanlite
The PavoSlim 60B is a slim bi-colour panel with light modifiers that Nanlite lists as part of the product information.
- Nanlite lists a range of 2700–6500 K for this model, with power from the mains or compatible batteries.
- Check which power supply and accessories are included with the version you want to buy.
Products related to this topic
Related products coming soon.
Frequently asked questions
How do I start lighting clear glass against a black background?
First, position the light beside or slightly behind the ornament, then check its outline in a test shot. A12 Product Photography describes backlighting as a way to light the product; adjust the angle and, if necessary, flag any light falling on the background.
Is a diffuser always better for engraved ornaments?
No, a diffuser isn’t always the best choice for fine engravings. In a broncolor demonstration, an engraving became almost invisible under soft, general lighting. So test both soft and more focused lighting on the ornament you’re photographing.
Are a battery, adapter and tripod included?
It depends on the model and version. NEEWER lists an adapter for the NL660, but no NP-F battery, and offers a version with a tripod. Check what’s included with the specific version.
What product regulations apply to an LED panel sold in the Netherlands?
Electrical and electronic equipment must meet the applicable European requirements. Business.gov.nl explains that, for a compliant device, the manufacturer must apply the required CE marking and draw up an EU Declaration of Conformity; CE is not a quality mark. Check the specific version and power supply separately.
What are my rights if a panel bought online doesn’t meet my expectations?
If a product is faulty, the seller is your point of contact, and the product must meet what you’re entitled to expect from it, according to the Dutch government. The Netherlands has no fixed statutory guarantee period that applies to all products. For online consumer purchases, you generally have up to 14 days after delivery to change your mind, subject to legal exceptions; ACM ConsuWijzer explains the cooling-off period.