Portfolio uploader with a dedicated workspace
You regularly send large files from your garden office. First, check whether your internet upload speed is sufficient, then compare it with the connection at your workspace.
Don’t rush to buy a new router: first, measure your upload speed on a computer connected to the router with an Ethernet cable, then compare it with a measurement in your garden office. If your internet upload speed is sufficient, a wired access point or mesh node could be suitable if you can run a cable. Without a cable, your options depend on the available Wi-Fi signal, your electrical wiring or whether you can set up a link between buildings. No extension will increase the upload speed of your internet package.
You regularly send large files from your garden office. First, check whether your internet upload speed is sufficient, then compare it with the connection at your workspace.
Your internet works in the house, but the connection is weak at your outdoor workspace. Distance, walls and the position of an additional network point can all make a difference.
You’re looking for a connection to your garden office without installing a new network cable. You’ll need to check whether your existing Wi-Fi signal, electrical wiring or a link between buildings could work.
First, measure your internet upload speed using a wired connection, then compare it with the connection at your workspace. This will show whether the main issue is your internet line or the connection to your garden office.
| What to consider | What should you check? | Who should pay particular attention? |
|---|---|---|
| Reliable uploads | Measure your upload speed at the router using an Ethernet cable, then compare it with a measurement at your workspace. Also check the stated upload speed of your internet connection. | When I send large portfolios, I want to know whether the internet upload speed or the connection to the garden office is the bottleneck. Around 36% of consumers prioritise upload reliability. |
| Coverage to the garden office | Check whether a wireless mesh node in the intended position can still connect reliably to the network. If you plan to install a device outdoors, check that the exact model is designed for this. | If the signal in my garden office is weak, I want to know whether an extension point can still connect to the house. Around 29% of consumers prioritise coverage at their workspace. |
| No cable installation | For powerline, check whether the adapters can communicate through your existing electrical wiring. For mesh, assess the signal; for a link between buildings, consider the installation and power requirements. | If I can’t install a new network cable, I want to know which option is practical: Wi-Fi, the electrical wiring or equipment linking the buildings. Around 21% of consumers want to avoid installing cables. |
| Total costs and installation | Work out the full setup you’ll need, including extra nodes, PoE power and any installation work. Don’t base your decision on an advertised speed alone. | I want to know in advance what equipment and installation my dedicated workspace will need, rather than looking only at the main router. Around 14% of consumers prioritise the total cost. |
Ratings such as AX3000 or AV1000 don’t guarantee the actual throughput at your workspace. Your internet connection’s upload speed may also be a separate limitation.
Take wired measurements at the router and at your workspace before choosing network equipment.
The extra node needs a reliable connection to the network itself. Distance and obstacles can weaken that connection.
Test the intended position and compare wireless backhaul with a wired connection between the nodes.
Different consumer units can prevent the adapters from communicating, and some extension leads can also interfere with the signal.
Test the adapters on your actual electrical wiring and use suitable wall sockets.
A wireless bridge can provide the connection between buildings, but power and Wi-Fi for devices in the garden office are separate parts of the setup.
Before buying, map out the whole route from your router to your laptop and check what equipment and power supply you’ll need.
The product ranges mentioned offer different options: Deco X50 mesh, the EAP650-Outdoor access point and the TL-WPA7517 KIT powerline solution with Wi-Fi.
The FRITZ!Repeater 3000 AX could extend an existing router’s coverage, particularly if you already use FRITZ! mesh equipment.
AiMesh could be worth considering if you already have compatible ASUS equipment and are thinking about adding another network node.
UniFi Bridging offers a way to connect separate buildings when installing a cable isn’t practical.
The products below offer options using mesh, powerline with Wi-Fi or a wired access point. Choose based on the connection to your garden office, not just the Wi-Fi generation. The Dutch Authority for Digital Infrastructure states that Wi-Fi in the Netherlands is licence-exempt when you use the designated frequencies and comply with the conditions of use. For the specific setup, also check the CE marking and the corresponding declaration of conformity, and set the correct country settings.
Image unavailable
A mesh set to extend Wi-Fi coverage. The connection to your garden office will depend in part on where you place the nodes and which backhaul you choose.
Tri-band; two mesh nodes; wired or wireless backhaul. Product information lists 10 Gbps, 2.5 Gbps and 1 Gbps WAN/LAN ports on each node.
Image unavailable
A powerline set with a Wi-Fi endpoint for a workspace where you don’t want to install a new network cable. The adapters need to communicate through your existing electrical wiring.
Product information lists Wi-Fi, LAN and a maximum transmission speed of 1000 Mbit/s. This isn’t a guaranteed upload speed at your workspace.
Image unavailable
A mesh set to extend coverage to a dedicated workspace. A wireless node will only help if it can still connect to the network from where you place it.
Wi-Fi 6 (802.11ax), dual-band (2.4 and 5 GHz), optional Ethernet backhaul and three gigabit ports per node.
Image unavailable
A dual-band mesh router that could help extend your Wi-Fi coverage. Check that this setup works with your existing network and the connection to your garden office.
The product name lists Wi-Fi 7, dual-band and mesh functionality.
Image unavailable
An access point for a workspace with a network cable running to the garden office. Check what power supply is needed for your chosen setup.
Wi-Fi 6, 2.4 and 5 GHz bands, gigabit Ethernet and PoE. Product information lists wall or ceiling mounting.
No, not before you’ve taken some measurements. Connect a computer to your home network with an Ethernet cable, measure the upload speed, then compare it with a measurement in your garden office. Also check the upload speed your internet provider lists for your connection.
Don’t assume a mesh device is suitable for outdoor use just because it’s called a mesh node. Check the installation location and the specifications of the exact model. For example, TP-Link explicitly markets the EAP650-Outdoor for indoor and outdoor use.
That depends on your actual electrical wiring. TP-Link warns that different consumer units can prevent the adapters from communicating. Test the connection before relying on it.
For the exact model, check how firmware updates are provided and what support and warranty apply to the version being sold. The product range name alone doesn’t define these terms.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi at home or in business premises is licence-exempt when you use the designated frequencies and comply with the conditions of use. Set the correct country settings, and check the CE marking and corresponding declaration of conformity for the specific equipment.