Who is this relevant to?

Gamer with poor coverage upstairs

Your connection is usable downstairs, but the floor or distance weakens the Wi-Fi in your gaming room. Compare adding another point with running a wired connection upstairs.

Household with several people online at once

Someone is gaming upstairs while others are online too. Check the connection between Wi-Fi points and make sure there are enough ports for devices you’d rather connect by cable.

Gamer who wants to prioritise devices

You can position the router somewhere suitable or connect it by cable, and want settings that give a gaming device priority. ASUS describes this kind of prioritisation feature for the RT-AX86U Pro; that alone doesn’t prove it will deliver lower ping upstairs.

What should you look for when choosing?

First, work out whether the problem is your internet connection itself or Wi-Fi coverage upstairs. Then choose a set-up that suits the available cable route, the position of the Wi-Fi points and the connections you need.

What to consider What should you check? Who is this most relevant to?
Wi-Fi coverage upstairs Test it where you play and check that an additional point will still get a usable connection in its intended position. If I game upstairs and the signal drops out there, I want to know where an extra point can still stay connected. Around 31% of consumers make upstairs coverage their top priority.
Connection stability while gaming Test your internet connection over a cable and check whether you can connect your PC or console upstairs via Ethernet. If I play online, I don’t want to mistake lag for a problem with my broadband connection. Around 31% of consumers prioritise a stable gaming connection.
Multiple users and connections Count the devices upstairs that need a wired connection and check which ports will remain available for backhaul or other devices. If someone is gaming upstairs while other people at home are using their devices, I want to choose a set-up that works for everyone. Around 25% of consumers prioritise simultaneous use and connectivity.
Equipment and installation If needed, first try repositioning your existing router, then compare the number of points and the cables, power supplies and any paid features you’ll need. If I don’t want a complicated installation or unnecessary extra equipment, I want to know what my home and existing network can already support. Around 13% of consumers prioritise ease of installation and avoiding unnecessary purchases.

Common pitfalls

  • Assuming a high Wi-Fi speed guarantees good coverage upstairs

    Coverage on the upper floor also depends on walls, floors, obstacles and where you position the Wi-Fi points.

    Test the spot where you play and compare possible positions and the connection between points before choosing based on a quoted speed.

  • Putting an extra Wi-Fi point where the signal has already dropped out

    The extra point still needs a usable connection to the rest of your network.

    Try a midway position with fewer obstacles, or find out whether you can run a cable upstairs. The Consumers' Association recommends keeping obstacles between Wi-Fi points to a minimum.

  • Treating related Deco models or pack sizes as the same product

    The ports and power options vary by model. A two-point pack is also a different purchase from a three-point pack.

    Check the full model name, pack size, hardware version, ports and power supply on the product page.

    Depending on the model, you may need a different power supply or additional networking equipment.

  • Planning the installation around the Wi-Fi points alone

    The connection you choose between points and the number of wired devices will also affect how you set up your network.

    Plan out the connections you’ll need and check which features are available without a subscription.

    You may need a cable route, extra networking equipment or a subscription for certain features.

Brands to compare

TP-Link

The Deco range is designed to extend Wi-Fi coverage using mesh points. TP-Link lists gigabit ports and optional Ethernet backhaul for the X50; the X50-PoE V2 is listed with PoE and two 2.5G ports.

  • An extra point can be positioned closer to the upper floor, and wired backhaul is an option if you have a suitable cable route.
  • Check the exact model and hardware version, the ports available and whether the required PoE power supply is included. The stated coverage isn’t a measurement of performance in your home.

ASUS

ASUS describes the RT-AX86U Pro as a standalone Wi-Fi 6 router with a gaming port and device prioritisation.

  • Worth comparing if router ports and prioritisation settings matter to you.
  • The features described don’t prove that it will deliver lower ping upstairs. If coverage is insufficient, you’ll still need to consider the router’s position or adding a separate access point.

FRITZ!

FRITZ! describes the Mesh Set 1600 as a two-piece set that connects to an existing router via LAN.

  • An option if you want to keep your existing router and extend Wi-Fi using multiple points.
  • Check the set-up and the available gigabit LAN ports on each point.

NETGEAR

NETGEAR describes the Orbi 770 RBE773 as a tri-band Wi-Fi 7 mesh system with three devices and an option for wired 2.5G backhaul.

  • Worth comparing if you need coverage in several rooms and are looking for a mesh set-up with more connection options.
  • The speed, coverage and device capacity stated by NETGEAR aren’t independent measurements taken in a Dutch home.

Joybuy product picks

These routers and mesh products are options to compare for Wi-Fi upstairs and online gaming with multiple users. When buying, check the CE marking and EU version of the specific device; the Dutch Authority for Digital Infrastructure says CE marking is mandatory for Wi-Fi routers.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-Pack

A two-point mesh set to compare if you want to extend Wi-Fi across several rooms; check that the positioning suits the route upstairs.

View at Joybuy
ASUS RT-AX52 AX1800 dual-band router with gigabit Ethernet

ASUS RT-AX52 AX1800 dual-band router with gigabit Ethernet

Worth comparing if you’re looking for a standalone router with AiMesh expandability; check whether you can position it somewhere suitable to improve coverage upstairs.

The product name specifies dual-band (2.4 GHz and 5 GHz) and gigabit Ethernet.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-Pack) dual-band Wi-Fi 6

A three-point mesh set to compare if you want to extend Wi-Fi across several rooms; check the ports you’ll need and where to place each point in advance.

The product name specifies dual-band (2.4 GHz and 5 GHz) and Wi-Fi 6 (802.11ax).

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Worth comparing if you want to extend a mesh router with several units that work together; check which units and positions will suit your home.

The product name specifies dual-band and Wi-Fi 7.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Worth comparing if you’re looking for a mesh router to extend Wi-Fi coverage; check how many units you’ll need and whether the planned positioning will reach your gaming room.

The product name specifies dual-band and Wi-Fi 6.

View at Joybuy

Frequently asked questions

Should I get a faster broadband package first?

Not before checking your connection. Test it using a computer connected by Ethernet and compare the result with your package. Walls, ceilings or the router’s position could also be causing a separate Wi-Fi problem.

Where should I put a wireless mesh point for the upper floor?

Place it somewhere it can still get a good signal from the other Wi-Fi points, rather than where the signal has already dropped out. The Consumers' Association recommends keeping obstacles between points to a minimum. Then test the connection where you game.

How do I connect Deco points to each other with a cable?

Follow TP-Link’s installation instructions. In router mode, connect the satellite point to the LAN side of the main Deco, or to a switch connected to it. Then check in the app that Ethernet backhaul is active.

Can I choose my own router in the Netherlands?

Yes. ACM ConsuWijzer says you can choose your own router, but equipment connected directly to your provider’s network must meet safety and connection requirements. If applicable, ask your provider for the settings you need.

What should I check when buying a wireless router from abroad?

Check the CE marking and EU version of the specific device. The Dutch Authority for Digital Infrastructure says CE marking is mandatory for Wi-Fi routers; a similar model name doesn’t confirm which version you’ll receive.