Who is this choice relevant to?

Gamer beyond the kitchen

Your games console or PC is in a room with walls and other obstacles in between. Start by checking the connection where you play, rather than focusing only on the top speed advertised on the router box.

Household that can run a cable

You can connect a wifi access point or gaming device on the other side of the kitchen using ethernet. In that case, the cable route, setup and number of available ports are important things to consider.

Cautious home network upgrader

You want to establish whether your broadband connection or existing wifi is the limiting factor before upgrading. You also want to know what extra devices, features and maintenance a new setup will involve.

What should you look for?

Start by testing with an ethernet cable at the router and then in the gaming room. The Consumentenbond recommends testing with a wired connection to distinguish broadband issues from wifi problems.

What to consider What to look for Who it matters to
Coverage around the kitchen Test the connection in the gaming room and in potential locations for an extra access point. Compare moving the router with adding an access point or mesh system; advertised coverage areas don’t guarantee coverage in your home. If I mainly need a stable connection in the gaming room, I want to know whether an extra access point will still receive a good signal there. Around 36% of consumers in this situation prioritise coverage in that room.
Actual download speed Compare a speed test via ethernet at the router with a test in the gaming room. Also check whether your gaming devices support the router’s wifi standard. If updates are taking a long time to download, I want to find out whether the broadband connection or the wireless link is the limiting factor. Around 29% of consumers focus first on establishing their download speed.
Wiring access points or devices Check the cable route you’ll need and the number of free WAN and LAN ports. Check whether each model supports ethernet backhaul or can work as an access point. If I can run a cable to the gaming room, I want to know whether that will let me avoid an extra wireless connection. Around 21% of consumers give wired setups top priority.
Buying and managing your setup Check what’s included in the box, the router or access point mode, and the requirements for the features you want. Also check how to keep the firmware and security settings up to date. If I don’t want a complicated setup, I look at installation, management and the features I really need. Around 14% of consumers say ease of management is their main concern when buying.

Common buying mistakes

  • Replacing your router or broadband plan without testing with a cable

    A slow connection at the router and a weak wifi signal in the gaming room call for different solutions.

    First, test with a computer connected to the router using an ethernet cable, then test again in the gaming room.

  • Putting a mesh access point where the signal is already weak

    The extra access point needs a usable connection to the main one. In a 2024 test, Tweakers reported that the more distant wireless satellites in the Deco X50 set performed less well; that test doesn’t measure performance in your home.

    Test the location of the extra access point before installing it permanently. If you can run a cable, consider using ethernet backhaul.

  • Assuming combined wifi speeds are download speeds

    Manufacturers list speeds for individual bands and combined maximum speeds. These don’t automatically tell you how fast one game will download in the room beyond the kitchen.

    Compare the specifications for the exact model and test it with your gaming device where you’ll use it.

  • Overlooking model variants or features

    Models with similar names may have different ports, power supplies or connection options. Tweakers reported that some advanced features on the tested Deco X50 set came with additional requirements.

    Check the full model name, number of units, ports, power supply and any requirements for features you want to use.

Brands to consider

TP-Link

The brand offers both individual routers, such as the Archer AX55, and mesh systems, such as the Deco X50. This makes it possible to compare a single transmitter with several wifi access points.

  • TP-Link lists optional ethernet backhaul and three gigabit ports per unit for the Deco X50.
  • In a 2024 test, Tweakers reported limitations with the more distant wireless satellites in the Deco X50 (3-pack); those results aren’t a measure of performance in your kitchen setup.

ASUS

The ZenWiFi XD5 is a mesh option, while the RT-AX58U is a single router that includes an access point mode. The exact model and number of units will determine which setups you can compare.

  • ASUS describes ethernet backhaul for the XD5 when the hubs are connected via ethernet.
  • Whether you can connect access points using cables depends on the cabling available and the setup you choose.

NETGEAR

The Orbi RBK763S is a tri-band wifi 6 set with one router and two satellites, making it an option to consider for a multi-point setup.

  • NETGEAR lists a dedicated connection between the router and satellites, as well as seven gigabit ports, for this set.
  • The stated capacity and coverage are manufacturer specifications, not performance measurements in a home with a kitchen between the router and gaming room.

devolo

The WiFi 6 Repeater 5400 Mesh Bundle contains two repeaters and, according to devolo, can also be used as an access point if you have cabling available.

  • devolo lists two gigabit ports per repeater.
  • Check that the setup and connection method you want to use will work with your existing router.

Joybuy products for this situation

This selection includes individual routers and mesh systems for a gaming room beyond the kitchen. Choose based on your test results and whether you need one transmitter or several wifi access points.

TP-Link TL-WR841N wireless router, single-band 2.4 GHz

TP-Link TL-WR841N wireless router, 2.4 GHz

An option if one router is enough; test whether the connection reaches the gaming room from your chosen location.

Wifi 4 on 2.4 GHz, with a stated maximum of 300 Mbit/s. Four 10/100 Mbit/s Fast Ethernet LAN ports and one ethernet WAN port.

View at Joybuy
TP-Link Deco E4 mesh system with three units, dual-band wifi 5

TP-Link Deco E4 (3-pack), wifi 5

A mesh system with three units for setups that need wifi in several locations; check that the units can connect to each other from their intended positions.

Dual-band wifi 5 on 2.4 and 5 GHz. Two ethernet ports per unit, with a stated maximum of 100 Mbit/s.

View at Joybuy
TP-Link TL-WR802N V4 router

TP-Link TL-WR802N V4 router

A single router to consider if one router in a suitable location is enough; check the coverage in the gaming room.

Wifi 4 on 2.4 GHz, with a stated maximum of 300 Mbit/s. The network port supports up to 100 Mbps.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh router, dual-band wifi 6

ASUS RT-AX52 AX1800 AiMesh router

A single router for a setup where one transmitter in a suitable location may be enough; test the connection in the gaming room.

Dual-band wifi 6 on 2.4 and 5 GHz, with three gigabit ethernet ports. AiMesh expansion works with compatible ASUS routers.

View at Joybuy
TP-Link Deco X50 mesh system with three units, dual-band wifi 6

TP-Link Deco X50 (3-pack), wifi 6

A mesh system for wifi in several locations; TP-Link lists optional ethernet backhaul between Deco units when you connect them with a cable.

Dual-band wifi 6 on 2.4 and 5 GHz, with three gigabit ports per unit.

View at Joybuy

Frequently asked questions

How can you tell before buying whether the kitchen is slowing down your downloads?

Compare a speed test on a computer connected to the router using an ethernet cable with a test in the gaming room. If the wired connection is consistently much slower than expected, contact your provider. Differences between the two locations could point to a limitation in your home network.

Where should you put an extra wireless access point?

Don’t place it somewhere the incoming signal is already weak. The Consumentenbond recommends minimising the number of obstacles between access points; if coverage is weak at the back of your home, a location closer to the centre may be more suitable. Check the connection quality using the installation app.

How do you connect Deco units using a cable?

TP-Link recommends setting up the units on the same network in the Deco app first, then connecting them with a cable. In router mode, TP-Link says the satellite should connect to the LAN port on the main Deco or to a switch connected to it. In access point mode, TP-Link describes more flexible connection options.

Can you connect your own router in the Netherlands?

ACM ConsuWijzer confirms that you’re free to choose your router: a provider can’t insist that you use a particular brand or model. If necessary, ask your provider for the connection settings and make sure the router meets the applicable requirements.

What should you look for in the CE marking on a wifi router?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the Netherlands must meet the relevant European requirements. The manufacturer applies the CE marking when the product conforms. Check the marking on the exact model and follow the instructions for use.