Who is this for?

Podcaster who also games

You want to use one headset for game audio and voice recording. Assess your voice with a test recording too: suitability for game chat doesn’t automatically mean it will sound good in a podcast recording.

Home studio with a recording interface

You’re looking for a headset for both listening and speaking. Check that the microphone and headphone plugs both fit your existing recording equipment.

Creator with a separate microphone

You already record your voice separately and mainly want headphones for listening to game audio, conversation and your recording. Make sure you select the separate microphone as the recording source in your recording software.

What should you consider when choosing?

Gaming headset with boom microphone

A good fit if: you want to use one headset for game audio and speech, and its connection is compatible with your system.

Bear in mind: claims about game chat aren’t an independent test of podcast recordings, so make a test recording.

Recording-focused headset with microphone

A good fit if: you’re looking for a headset for speaking and listening, and can check the connections in your recording setup in advance.

Bear in mind: connections vary. The RØDE NTH-100M uses a TRRS cable, while the Audio-Technica BPHS1 with BPCB1 cable has separate XLR and 6,3mm plugs.

Headset with a separate podcast microphone

A good fit if: your voice recording is already set up separately, or you want to choose a microphone independently of your gaming headset.

Bear in mind: you’ll need to set up two devices and possibly different audio paths; monitoring depends on your equipment.

What to consider What should you check? Who is this important for?
Clear voice recording Check the microphone type and position. Make a test recording with speech, keyboard sounds and typical game audio. If I game and speak at the same time, I want to assess my voice in the recording rather than relying on game chat alone. Around 33% of consumers give clear voice recording top priority.
Monitoring and audio bleed Check whether direct monitoring is available and test the listening route you’ve chosen. Listen back to see if headphone audio has been picked up by the microphone. During a recording, I want to hear my voice without a delayed second voice or headphone audio being picked up unintentionally. Around 27% of consumers prioritise monitoring without distracting delay or audio bleed.
Comfort Look at adjustability and cushion material. If possible, try the headset during a session of a similar length to the ones you plan to record. During longer recordings, I don’t want pressure, warmth or the fit with my glasses to distract me. Around 20% of consumers prioritise comfort throughout a full session.
Connections Note the microphone input and headphone output on your equipment. Check the exact headset version and the cables included. If I want to connect my headset to an existing computer, mixer or interface, both the microphone and headphone connections need to be compatible. Around 20% of consumers start by checking compatibility with their existing recording setup.

Common mistakes

  • Assuming that a compatible headphone plug will also make the microphone work

    The RØDE NTH-100M requires the supplied TRRS cable for the headset microphone. The Audio-Technica BPHS1 version with BPCB1 cable uses separate XLR and 6,3mm connections.

    Before choosing a version, compare its microphone and headphone connections, as well as the cables included, with your recording equipment.

  • Using direct and software monitoring at the same time

    Shure explains that with the X2u, monitoring through computer software at the same time can produce a delayed second version of your voice.

    Test the monitoring route with a short recording and turn off any unintended double monitoring.

  • Relying on game chat claims alone

    A description of game chat doesn’t tell you how a podcast recording will sound with your microphone position, software and background noise.

    Make a test recording using the settings and in the environment you’ll use for your podcast.

Brands to consider

RØDE

According to RØDE, the NTH-100M combines over-ear headphones with a detachable headset microphone for uses including podcasting and gaming.

  • RØDE documents the supplied TRRS cable and splitter for separate 3,5mm computer ports.
  • For other recording equipment, check which connections you need; product specifications don’t measure how your voice will sound in your studio.

Audio-Technica

The BPHS1 is a closed-back broadcast headset for speaking and listening.

  • For the BPHS1 with BPCB1 cable, Audio-Technica lists an XLR connection for the microphone and a 6,3mm plug for the headphones.
  • Don’t confuse this version with the BPHS1-XF4, which has a different connector. Check that your equipment supports both connections.

HyperX

The wired Cloud III is a gaming headset with a microphone and several listed connection options.

  • HyperX lists 3,5mm, USB-C and USB-A connections for this model.
  • The product description of its game chat features isn’t an independent assessment of podcast recordings.

SteelSeries

The Arctis Nova 1 is a wired 3,5mm gaming headset with a retractable microphone.

  • SteelSeries lists the Nova 1’s weight as 253 g and describes microphone processing through Sonar software.
  • SteelSeries recommends extending the microphone and positioning it by the corner of your mouth; your voice may sound quieter if it’s fully retracted. Don’t assume the same software features are available on every platform.

Razer

The BlackShark V2 X is a gaming headset with a flexible cardioid boom microphone.

  • Razer lists closed-back earcups and a weight of 240 g for this model.
  • Razer’s claim about microphone clarity isn’t an independent measure of how your voice will sound in your room.

Joybuy products

These are wired gaming headsets with microphones, for anyone who wants to use one headset for both game audio and speech.

JBL Quantum 300 wired over-ear gaming headset with flip-up microphone

JBL Quantum 300

A wired gaming headset with a boom microphone for anyone who wants to use one device for game audio and speech.

The product description lists a 3,5mm connection and a directional, flip-up microphone.

Removable ear cushions are mentioned; check that the connection is compatible with your recording equipment.

View at Joybuy
Turtle Beach Atlas 200 PC gaming headset with flip-to-mute microphone

Turtle Beach Atlas 200

A wired PC gaming headset for anyone who wants to combine game audio and speech using one headset.

The description lists a flip-to-mute microphone, a 3,5mm connection and a USB adapter.

Memory foam ear cushions are mentioned; check that the connections are compatible with your recording setup.

View at Joybuy
JBL Quantum 120 wired multiplatform gaming headset

JBL Quantum 120

A wired gaming headset for anyone looking for a detachable microphone and a 3,5mm connection.

The product description lists a cardioid boom microphone and fabric ear cushions.

Check that the 3,5mm connection is suitable for the microphone and headphone ports on your equipment.

View at Joybuy
Razer BlackShark V2 X 7.1 wired gaming headset

Razer BlackShark V2 X 7.1

A wired gaming headset with a boom microphone for anyone who wants to game and speak using one headset.

The product description lists a cardioid microphone and a 3,5mm connection. Razer describes closed-back earcups and lists the BlackShark V2 X’s weight as 240 g.

Check that the connection is compatible with your recording equipment; the listed weight doesn’t tell you how the headset will feel to wear.

View at Joybuy
HyperX Cloud III gaming headset with detachable microphone

HyperX Cloud III

A gaming headset with a detachable microphone for anyone who wants to use one headset for both speech and game audio.

The product description lists 3,5 mm, USB-A and USB-C connections, plus memory foam in the headband and ear cushions.

Check which connections your computer and recording software support; having different plug types doesn’t tell you how the software processes the signals.

View at Joybuy

Frequently asked questions

How can I check that I can hear my own voice without an echo?

First, check whether your microphone or interface offers direct monitoring, then listen through the headphone output you plan to use. Shure specifically explains that with the X2u, enabling software monitoring as well can create a delayed second voice. Check the settings on your own equipment.

Can I connect the RØDE NTH-100M to separate microphone and headphone ports on my PC?

According to RØDE, the supplied splitter is designed for separate 3,5mm inputs and outputs. You’ll also need to use the supplied TRRS cable for the headset microphone to work.

What connections does the Audio-Technica BPHS1 have?

For the BPHS1 with BPCB1 cable, Audio-Technica lists an XLR microphone connection and a 6,3mm headphone plug. Check the exact version: the BPHS1-XF4 has a different connector.

Do I always have 14 days to change my mind after buying online in the Netherlands?

No, not for every purchase. According to the Dutch government, a 14-day cooling-off period applies in many cases when buying at a distance; check the terms that apply to your specific purchase.

Should I contact the manufacturer directly if my headset is faulty?

Your statutory rights for faulty goods are against the seller. According to the Dutch government, the seller must provide a solution; in the Netherlands, there is no fixed statutory guarantee period that applies to all products.