Simmer who regularly practises tuning frequencies
You want to set and change simulated COM frequencies repeatedly during a long flight, without having to use the mouse to operate the cockpit for every action.
The right panel for you depends on the actions you want to practise: choose a general radio stack for COM and NAV controls, a GNS530 if you use that navigator in your virtual aircraft, or an A320 panel for a supported Airbus aircraft. Before buying, check the combination of simulator version, aircraft, software, connections and placement. A panel for home use is not automatically a qualified training device.
You want to set and change simulated COM frequencies repeatedly during a long flight, without having to use the mouse to operate the cockpit for every action.
You fly a virtual aircraft with compatible GNS avionics and want to practise radio and navigation tasks using a replica interface.
You practise procedures in a supported Airbus aircraft and want physical controls for its radio management functions.
Choose this if: you mainly want to operate COM1/2, NAV1/2 and transponder settings using physical buttons and displays.
Keep in mind: Logitech G also lists DME and ADF functions, but how they work depends on the simulator and virtual aircraft. Logitech describes a simulator-specific plug-in.
Choose this if: your virtual aircraft uses a compatible GNS 530 and you want to practise both tuning COM frequencies and using the navigator controls.
Keep in mind: RealSimGear describes a plug-in and video connection. The HDMI cable is not included, and the stated power supply has a North American plug type.
Choose this if: you’re practising Airbus-style radio procedures in an aircraft variant listed as compatible by WINGFLEX.
Keep in mind: its functions are aircraft-specific, so it’s not a general replacement for a radio stack. Check the aircraft variant and whether Bridge software is needed.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Tuning frequencies | Check that the panel has the COM channels and any NAV or XPDR functions used by your virtual aircraft. | During long sessions, I want to tune frequencies physically again and again rather than keep searching for the cockpit controls; around 36% of consumers prioritise frequency controls above all else. |
| Software integration | Make a note of your simulator version, operating system and exact aircraft variant. Check the relevant plug-in, mappings and supported functions. | I want the buttons and displays to work with my simulator and aircraft, so I can practise procedures without first having to figure out the integration; around 29% of consumers prioritise compatibility. |
| Compatible avionics | Check which navigator or radio stack is fitted in your virtual aircraft. For the WINGFLEX option, also check which aircraft variants are supported. | I specifically want to practise using the GNS or Airbus controls fitted in my virtual aircraft, even if a general radio stack is more versatile; around 21% of consumers mainly choose based on how well it matches their avionics. |
| Placement and connections | Measure the desk space available and check USB ports, video connections, cables, power supply and any mounting options. | During long sessions, I want the panel to be easy to reach and read, with connections that suit my setup; around 14% of consumers prioritise placement and required accessories. |
A general radio stack and a GNS530 operate different interfaces. First, work out which avionics are fitted in your virtual aircraft and which actions you want to carry out physically.
Check the controls in your virtual aircraft before choosing a panel, so you don’t end up buying a different interface from the one you want to practise with.
Plug-ins, button mappings and compatibility lists apply to specific combinations. A simulator being listed does not prove that every aircraft variant will work.
Before buying, check the simulator version, the exact aircraft variant and the latest software instructions.
Allow time to install the panel and check the connection, including after software updates.
For the GNS530, RealSimGear specifies a video connection and an HDMI cable that is not included. The stated power supply has a North American plug type.
Check which connections and power solution your setup requires, and what’s included with the panel.
Depending on your setup, you may also need a suitable video cable, power solution or stand.
The Flight Radio Panel range is worth considering if you’re looking for a separate radio stack for simulated COM, NAV and other panel functions.
The GNS530 is designed for anyone who wants to use a GNS 530 navigator with radio functions in their simulator.
The A320 RMP COMBO CUBE is designed for radio management in Airbus-style aircraft variants.
No. Logitech G describes the Flight Radio Panel as being for COM and NAV controls, among other functions. The separate Flight Instrument Panel displays flight information such as altitude and speed. Choose based on the actions you want to practise.
First, check that the correct plug-in and mappings are set up for your simulator version and virtual aircraft. Logitech describes a simulator-specific plug-in, while RealSimGear provides its own interface and configuration for GNS devices. Follow the instructions for your software version.
For the GNS530, RealSimGear specifies an HDMI cable that is not included and a power supply with a North American plug type. Check that the connections, power supply and any mounting options suit your setup in the Netherlands, and confirm exactly what’s included.
If you’re only simulating in software and aren’t transmitting on aviation frequencies, you’re not using the real frequencies for which the Dutch Authority for Digital Infrastructure requires a licence. This does not constitute separate approval of a panel. Using actual transmitting equipment on aviation frequencies is a different matter.
No, don’t assume that it does. The Human Environment and Transport Inspectorate sets out requirements for qualifying flight simulators and for organisations that use such devices for training. A home panel or a claim that it can be used for practice does not demonstrate that it is qualified.