Radio procedure practice
If you want to set simulated COM frequencies using physical controls and switch from standby to active, consider the Logitech G Flight Radio Panel. Logitech describes these functions in its product information and manual.
If your main aim is to set simulated COM frequencies and switch between standby and active, choose a dedicated radio panel. A compact controller is a better fit if you want to operate other instruments as well, but have limited desk space. A replica GNS 530 is most relevant if you specifically want to practise using this avionics unit, but you’ll need to pay extra attention to connections, simulator compatibility and mounting.
If you want to set simulated COM frequencies using physical controls and switch from standby to active, consider the Logitech G Flight Radio Panel. Logitech describes these functions in its product information and manual.
If you want to put your controller away after use and are happy to operate it using different modes, consider the compact Octavi IFR-1. Octavi lists its dimensions and explains that its functions change depending on the selected mode.
If you specifically want to use the buttons and screen of a replica navigator, compare models from RealSimGear and FlightSimBuilder. Check the connections, software and mounting required for the version you choose.
Choose this if: you mainly want to set COM frequencies and switch between standby and active.
Bear in mind: Logitech Support lists a width of 282 mm without the bracket. Also check the space available and compatibility with your simulator version.
Choose this if: you want to operate other instruments as well as radio functions on a small desk.
Bear in mind: on the Octavi IFR-1, the rotary control’s function depends on the selected mode. Octavi lists dimensions of 112 × 74 × 46 mm.
Choose this if: you want to use a GNS 530-style navigator in a simulator aircraft equipped with this avionics unit.
Bear in mind: RealSimGear describes an HDMI connection, plug-in and mounting options; the manual specifies a power adapter with a North American plug. FlightSimBuilder lists the metal stand separately.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Setting radio frequencies | Check the COM controls and whether you can switch from standby to active. The Logitech manual explains how to set standby values and switch using ACT/STBY. | I want to set and activate frequencies myself while practising, rather than just use a panel with radio buttons. Around 36% of customers put direct radio control first. |
| Space and storage | Measure the available desk space and allow for cables and a possible stand. The listed dimensions of a standalone controller don’t necessarily show how much room the complete setup will take up. | I want to be able to put my controls away after use or fit them alongside my existing equipment. Around 29% of customers prioritise keeping desk space to a minimum. |
| Simulator integration | Check your simulator version, required plug-in, connections and aircraft profile. Octavi lists MSFS 2020/2024 and X-Plane 11/12; check that the functions you want are compatible with your setup. | I want to know in advance whether the controller will work with my simulator and chosen aircraft, including the required software and connections. Around 21% of customers prioritise simulator integration. |
| Specific avionics | Check that the simulated aircraft uses the replica GNS 530 and that the screen, buttons and mounting will suit the space available. | I specifically want to practise using a GNS 530, rather than just switching general radio frequencies. Around 14% of customers prioritise a specific GNS 530 replica. |
On the Octavi IFR-1, the rotary control’s function depends on the selected mode. The Logitech radio panel has separate radio selection and ACT/STBY controls, so the operation differs between the two types.
Choose based on the action you want to practise, and consider how much mode switching you’re happy with.
The complete setup may also require a stand, video cable, compatible power connection or adapter. What’s included varies by model.
Check the contents of the exact version on offer, and measure the space the assembled setup will take up.
You may need to buy a stand or compatible connection separately. RealSimGear does not include an HDMI cable; FlightSimBuilder lists the metal stand separately.
EASA sets out separate qualification and usage rules for simulators used in training. Owning a consumer panel doesn’t, by itself, show that a practice session counts towards an approved course.
Ask your training provider which equipment and exercises are recognised as part of your course.
A good option if you want to practise radio procedures using dedicated controls.
A good option if you want to operate several simulated instruments with one compact controller.
A good option if you specifically want to practise using a replica GNS 530.
A good option if you’re looking for a specific GNS 530 setup and want to compare the included connections.
According to the manual, with the Logitech panel you first set the standby value, then use ACT/STBY to switch it with the active value. Check that these controls match the procedure you want to practise in your simulator aircraft.
Check the complete setup first. RealSimGear describes a desktop stand or panel mounting, a plug-in and a video connection; FlightSimBuilder lists the metal stand separately. Check the connections and available space before buying.
According to the Dutch government, when you buy at a distance you generally have 14 days to change your mind, although there are exceptions. You’re also entitled to a product that is of satisfactory quality; the Netherlands has no fixed statutory warranty period of exactly two years.
No, don’t assume they do. EASA sets out separate qualification and usage rules for simulators used in training; buying a consumer panel doesn’t show that it counts towards your course. Ask your training provider which exercises and devices are recognised.