Practising approaches on a small desk
You want to operate several approach controls physically, but don’t have room for separate panels. Octavi says the Octavi IFR-1 measures 112 × 74 × 46 mm.
For a small desk, a compact multi-function controller can handle several tasks if you’re happy to switch modes. A GNS530 replica is a more focused choice for practising with that navigator, while separate radio, autopilot and instrument panels each have a more limited function. Before buying, check your simulator, virtual aircraft, connections and any plug-ins. Practising at home with a consumer panel doesn’t automatically count as recognised flight training.
You want to operate several approach controls physically, but don’t have room for separate panels. Octavi says the Octavi IFR-1 measures 112 × 74 × 46 mm.
Your virtual aircraft uses a GNS530 or a compatible avionics profile, and you want to practise using its buttons and screen layout. RealSimGear and FlightSimBuilder describe solutions for specific avionics systems.
You want flight data to be visible separately during an approach, and are comparing a physical display with software that lets you arrange a panel on an available screen. Logitech G describes selectable instrument displays, while Sim Innovations describes customisable 2D panels.
A good fit if: you want to operate COM, NAV, FMS and autopilot functions in limited desk space.
Bear in mind: shared buttons require you to select a mode, and the controller doesn’t have its own navigation display. Octavi lists the IFR-1 as measuring 112 × 74 × 46 mm.
A good fit if: your virtual aircraft uses a GNS530 and you specifically want to practise using that navigator.
Bear in mind: RealSimGear describes a plug-in and video connection for the GNS530. The manufacturer says an HDMI cable isn’t included and specifies a power supply with a North American-style plug.
A good fit if: you mainly want to set radio and navigation frequencies, or physically adjust autopilot settings.
Bear in mind: the Logitech G Radio Panel and Flight Multi Panel have different functions. Neither panel is also a complete navigator and instrument display.
A good fit if: you want to read instruments away from the main display, perhaps using a custom panel layout on an available screen.
Bear in mind: Logitech describes 15 selectable views on the Instrument Panel; Air Manager requires suitable screen space and software configuration.
A good fit if: you mainly fly with avionics and a screen layout that match a supported FlightSimBuilder TNxi 8X profile.
Bear in mind: FlightSimBuilder describes different profile implementations. For some MSFS displays, you’ll need to pop out the screens and position them manually, as well as make the necessary connections.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Several functions in limited space | Check the dimensions, space needed to operate the controls and cable routing. Also check which functions are selected using modes. | I want to operate several approach controls on my small desk, without needing space for separate panels. Around 31% of consumers prioritise compact controls for multiple functions. |
| The right navigator | Compare the exact device model with the avionics in your aircraft, and check the simulator version, plug-in and video connection. | I mainly want to practise using the buttons and procedures of the navigator in my virtual aircraft. Around 25% of consumers prioritise controls for one specific navigator. |
| Radio or autopilot controls | Check that the panel performs the task you want and that the software works with your simulator and aircraft. | I want to operate the controls physically when making regular radio or autopilot adjustments. Around 25% of consumers prioritise separate radio or autopilot controls. |
| Reading instruments separately | Decide which information needs to be visible at the same time, and whether you need an extra screen or multiple displays. | I want to read instruments away from the main display during an approach. Around 19% of consumers prioritise a separate instrument display. |
The separate Logitech G panels are designed for different tasks. A radio or autopilot panel won’t automatically replace a navigator or instrument display.
Make a note of the control you want to use most often during an approach, then compare it with the functions of the exact panel.
You may need a second device for another type of physical control.
Logitech describes selectable views on the Instrument Panel. Switching between views isn’t the same as reading them all at once.
Decide in advance which flight data needs to be visible at the same time during your approach.
Logitech says you’ll need additional units for multiple simultaneous views; a suitable screen may also be needed for a software panel.
A panel may also need space for cables and connections. For the RealSimGear GNS530, the manufacturer also describes a plug-in and video connection.
Measure your desk and check the cable routing, available video output and package contents for the version you want to buy.
RealSimGear says the HDMI cable isn’t included. Also check that the supplied power supply and plug are suitable for your setup.
The manufacturers’ instructions mentioned here distinguish between simulator connection, device configuration and avionics profiles.
Before buying, check that the exact panel, your simulator version and the aircraft you use to practise approaches are compatible.
Setting up profiles, plug-ins or pop-out avionics screens may take extra time.
For anyone who wants to operate different virtual instrument functions with one controller on a small desk.
For anyone looking for a separate radio, autopilot or instrument panel for a specific task.
For anyone who wants to practise using a specific GNS530 navigator with physical controls in a compatible virtual aircraft.
For anyone who wants to arrange instruments on an available screen rather than choose a fixed physical panel.
For anyone looking for physical panel controls for an avionics profile supported by the manufacturer.
Choose a radio panel if setting the supported COM and NAV frequencies is your main priority. If you want to operate the menus and procedures of a GNS530 yourself, check that your virtual aircraft uses that navigator and that the plug-in and video connection are compatible.
Not the Logitech G Flight Simulator Instrument Panel described here: Logitech lists 15 views that you can switch between, and says additional units are needed for multiple simultaneous views. Air Manager is a software option for creating your own panel layout on a suitable available screen.
Check your simulator version and aircraft avionics, a suitable video output, USB, the plug-in, the power supply and the space available. RealSimGear says the HDMI cable isn’t included and describes the GNS530 as having a power supply with a North American-style plug. Check with the seller which version is supplied in the Netherlands.
For applicable distance sales from a business, the Dutch government says you’ll often have 14 days to change your mind; exceptions and the type of seller may be relevant. You’re also entitled to a product that meets the required standard, and can contact the seller if there’s a fault. According to the Dutch government, there’s no fixed statutory warranty period in the Netherlands that applies to all products.
No, don’t assume that it does. The Human Environment and Transport Inspectorate describes the qualification of Flight Simulation Training Devices and separate requirements for organisations that use these devices for training. Buying a consumer panel does not, in itself, prove that it is qualified or has training value.