Who are these panels for?

Scenery-focused flyer who wants to see instruments separately

This flyer wants to keep the scenery in view during a virtual mountain flight while also checking a selected flight reading separately. An instrument display is only useful if it supports the display you want and your simulator. Logitech G Netherlands describes the Flight Simulator Instrument Panel as offering selectable instrument displays.

Flyer who wants to use physical buttons

This flyer wants to adjust navigation or autopilot settings during a flight using buttons, rather than the controls in the virtual cockpit. Logitech G Netherlands describes physical autopilot controls for the Flight Multi Panel; Octavi describes different function modes for the IFR-1.

Cockpit builder who flies different aircraft

This cockpit builder wants to configure controls for each aircraft or replicate a supported G1000 cockpit. How useful the setup is depends on the assigned functions, aircraft support and your PC’s connections. RealSimGear specifies two HDMI connections for the G1000 Suite.

What should you look for when choosing?

First decide whether you want to read flight information on a separate display or operate controls physically. Then check that the panel works with your simulator, aircraft and existing PC and audio setup.

What to consider What to look for Best suited to
Viewing flight information separately Check that the reading you want is available and compatible with your simulator. Logitech G Netherlands lists a 3.5-inch LCD screen with 15 selectable displays for the Flight Simulator Instrument Panel; you can’t view them all at once. If I want to check a flight reading separately while looking at the mountain scenery, a selectable instrument display suits my needs. Around 36% of consumers prioritise having flight information visible separately.
Adjusting settings while flying Compare the buttons and functions with the controls you use in your aircraft. The Flight Multi Panel focuses on autopilot controls; the Octavi IFR-1 has modes for COM, NAV, FMS and autopilot, among others. If I want to change navigation or autopilot settings using buttons while flying, I focus on the controls for the aircraft I’ve chosen. Around 29% of consumers prioritise physical controls while flying.
Flying different aircraft Check the function assignments and aircraft support. The RealSimGear G1000 Suite is designed for supported G1000 aircraft; the manufacturer specifies a Windows PC and two HDMI connections. If I switch between aircraft or want to replicate a supported G1000 cockpit, the controls need to match my avionics. Around 21% of consumers prioritise controls for different aircraft.
Connections and headset Check the PC connections required for each panel and set your headset up separately as an audio output device. Microsoft Support lists selecting the wrong output device as a possible reason for no sound in Windows. If I want to keep using my current PC and headset, I first check which connections the panel I’ve chosen requires. Around 14% of consumers prioritise compatibility with their existing PC and headset setup.

Buying pitfalls

  • Mistaking a control panel for an extra instrument display

    The Logitech G Flight Multi Panel is designed for autopilot controls, while the Flight Simulator Instrument Panel displays instrument readings. Choose based on the function you need, not just because the word ‘panel’ appears in the name.

    Before you buy, decide whether you want to view flight data or operate controls.

  • Assuming every feature will work straight away

    The Octavi IFR-1 uses different modes, while Honeycomb lists separate drivers for certain LED functions. How well it works may therefore depend on your simulator version, aircraft and configuration.

    Check support for your simulator version, aircraft and the features you want before choosing a panel.

    Allow time to configure the functions or install any required software.

  • Choosing a specialist G1000 set without checking your PC connections

    RealSimGear says the G1000 Suite requires a Windows PC with two HDMI connections. HDMI cables and a stand aren’t included.

    Check aircraft support, available PC ports, power requirements and setup space before choosing the set.

    You’ll need two HDMI cables for the screens, and you’ll also need to arrange a stand yourself.

  • Blaming the new panel when there’s no sound in your headset

    An instrument display or control panel doesn’t automatically manage audio output. Microsoft Support lists selecting the wrong audio device in Windows as a possible reason for no sound.

    Test your headset and select the intended audio device in Windows before assuming the panel is the cause.

Relevant brands

Logitech G

Offers separate instrument and control panels for adding a specific set of functions to your cockpit.

  • Logitech G Netherlands lists a 3.5-inch LCD screen with 15 selectable readings for the Flight Simulator Instrument Panel.
  • The Flight Multi Panel controls the autopilot; it doesn’t replace an instrument display. Check support for your exact simulator version.

Honeycomb Aeronautical

The Bravo Throttle Quadrant combines configurable engine levers with panel functions.

  • The manufacturer lists controls for single-engine general aviation aircraft.
  • Its combined controls need more setup space than a small standalone panel. Separate drivers are available for certain LED functions in Microsoft Flight Simulator 2020 and 2024.

Octavi

The IFR-1 combines navigation and autopilot controls in a controller with different function modes.

  • Octavi says users can select modes for COM, NAV, FMS, autopilot and transponder functions, among others.
  • The rotary dial and action buttons work differently depending on the selected mode, so check that the controls suit your aircraft.

RealSimGear

The G1000 Suite is designed for a separate PFD and MFD setup with supported G1000 aircraft.

  • RealSimGear lists two HDMI screens and an audio control panel.
  • The manufacturer specifies a Windows PC and two HDMI connections; HDMI cables and a stand aren’t included. The audio control panel doesn’t automatically mean the suite provides sound to a headset.

VIRPIL Controls

The VPC Control Panel #2 is designed for those who want to assign different cockpit functions to physical controls.

  • VIRPIL lists programmable buttons, switches and rotary dials, and describes the panel as a standalone USB device.
  • Allow time to assign the functions you want to the panel during setup.

Joybuy products

Related products coming soon.

Frequently asked questions

For a virtual mountain flight, do I mainly need a display or physical buttons?

Choose an instrument display if you mainly want to keep a flight reading visible separately; choose physical controls if you mainly want to change settings. In either case, check that the function is compatible with your simulator and aircraft.

Does a flight simulator panel control the sound in my headset?

Don’t assume it does: instrument and control panels don’t automatically provide audio output. On a Windows PC, select your headset separately as the audio output device.

What should I check when installing a panel?

Check your simulator version, support for your aircraft and whether you need any drivers or function assignments. For the G1000 Suite, RealSimGear specifies, among other things, a Windows PC and two HDMI connections; HDMI cables aren’t included.

What are my rights in the Netherlands when buying online or if a panel is faulty?

According to the Dutch government, many online purchases come with a 14-day cooling-off period, subject to applicable conditions and exceptions. This is separate from your right to a product that is fit for purpose. The Dutch government states that the Netherlands has no fixed statutory warranty period; what you can reasonably expect from a product depends, among other things, on the product itself and the information provided.