Approach pilot who sets frequencies
You want to change COM or NAV frequencies using physical controls during a virtual approach, without constantly searching the screen. Logitech G and Octavi describe panels with radio controls.
Start by thinking about the actions you want to perform physically during a virtual approach: setting COM and NAV frequencies, operating the autopilot or reading instruments. A radio panel does not route audio to your headset by itself. A multifunction controller can combine several functions, but the controls may vary between aircraft. So check support for your simulator version and aircraft, any required plug-ins and connections, and set up the audio separately.
You want to change COM or NAV frequencies using physical controls during a virtual approach, without constantly searching the screen. Logitech G and Octavi describe panels with radio controls.
You often change autopilot settings and want the controls close to hand. Logitech G and Honeycomb Aeronautical describe physical autopilot controls.
You want to read flight information and hear communications. An instrument display or software panel and the audio settings for your headset are separate considerations; Logitech G, Sim Innovations and FlyByWire describe these functions separately.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Radio and navigation frequencies | Check which COM and NAV functions your aircraft and simulator assign to the panel. | If I want to change frequencies during an approach without repeatedly searching the screen, I prioritise direct controls; around 29% of consumers put radio frequencies first. |
| Autopilot | Check which functions are available for your aircraft and simulator version. | If you want to change autopilot settings during an approach while keeping the virtual cockpit in view, look for physical controls; around 24% of consumers prioritise the autopilot. |
| Reading instruments | Decide which instruments you want to see at the same time and check how much screen space is available. | If I want to read flight information alongside the main display, visibility matters; around 18% of consumers put instruments first. |
| Use with different aircraft | Compare the supported simulator versions, aircraft functions, plug-ins and connections with your own setup. | If you switch between aircraft, you’ll want to know whether the functions and controls are suitable; around 18% of consumers start with versatility and compatibility. |
| Communications through a headset | Check the audio output and microphone in your simulator and any ATC client, and test the channel selection for the aircraft you’re using. | If my main concern is setting up communications through my headset properly, I check the audio separately from the panel; around 11% of consumers prioritise this combination. |
A radio panel is designed to control radio functions. Logitech G describes frequency controls; FlyByWire documents audio channel selection separately for the A32NX.
Test the audio output and channel selection in your own simulator and ATC setup before choosing additional radio hardware.
Logitech G describes 15 displays that you can switch between on the Flight Instrument Panel. That is not the same as showing all the displays at once.
Make a note of which instruments you want to see simultaneously, then compare a separate display with a software panel on a suitable screen.
You may need extra screen or panel space to show several separate displays at once.
Available functions may depend on the aircraft and avionics used. Specialised controls may also require a plug-in or specific connections.
Check the exact simulator version, aircraft, plug-in and connections required for the approach you want to practise.
Offers separate Flight Sim panels for buyers who want to add a specific function.
The IFR-1 is a compact, multifunction controller with functions that can be used during approaches.
Air Manager is software that lets you arrange instrument panels on an existing or separate screen.
The Bravo Throttle Quadrant combines throttle levers with autopilot controls.
The GNS530 is designed for specific GPS and approach controls in a compatible simulated cockpit.
No. Choose a radio panel for physical frequency controls. Check the audio output and microphone separately in your simulator and any ATC software; channel selection may also depend on the aircraft you’re using. FlyByWire documents radio tuning and audio channel selection separately for the A32NX, not as a general guarantee for other aircraft.
Compare your simulator version and aircraft with the support information for the exact product. For the GNS530, RealSimGear lists a plug-in and HDMI connection among the requirements; Logitech G lists an add-on for the Multi Panel. Then test the assigned functions and audio settings in your simulator.
It depends on the setup you choose. RealSimGear states that the HDMI cable for the GNS530 is not included. Sim Innovations’ Air Manager is software for an existing or separate screen; premium panels may be sold separately. Check what you’ll need for your chosen combination.
ACM ConsuWijzer states that online consumer purchases generally come with a cooling-off period of up to 14 days after delivery, subject to exceptions. You are also covered by the statutory guarantee if a product, when used normally, does not meet what you could reasonably expect; the seller is your point of contact. Check the terms that apply to your purchase.
Don’t assume they do. The Dutch Human Environment and Transport Inspectorate describes a qualification certificate for flight simulator (FSTD) operators and separate requirements for organisations that use such a simulator for training. This does not confirm that using a separate home panel counts towards training hours; for a specific course, ask which qualified device is used and what it is approved for.