Choose a panel based on what you want to operate or read physically during a virtual landing, such as the landing gear, approach settings or flight data. Then check that it fits on your desk and works with your simulator and aircraft. A multi-function panel isn’t automatically the best choice.
Who is a flight simulator panel for?
Landing practice with limited desk space
Want to use physical controls without setting up a full cockpit? Microsoft Flight Simulator Team identifies available space and the level of detail you want as factors to consider when putting together a simulator setup. So remember to measure the space needed for mounting and using the controls, too.
Approach pilot who adjusts lots of settings
If you mainly adjust radio, navigation or autopilot settings during virtual approaches, a compact controller could complement your existing controls. Logitech G and Octavi describe panels designed for these functions; check that they’re supported by your simulator and aircraft.
Pilot who wants to read instruments separately
If you want to view flight data outside the main display, decide whether you’re looking for switchable readouts or controls for a specific simulated navigator. Logitech G describes selectable instrument displays, while RealSimGear makes a replica for a specific navigator.
What should you look for when choosing a panel?
First, decide which action you want to practise during landing. Then compare the desk space required and any simulator support, software or base unit requirements.
| What to consider |
What to check before buying |
Who should pay extra attention? |
| Landing controls |
Compare the functions and switch assignments with the actions you need for your aircraft. |
If I mainly want to operate the landing gear or other switches physically during landing, I’ll look for a panel that suits those actions. Around 33% of consumers prioritise physical landing controls. |
| Space and setup |
Measure the available width and depth, including mounting space and room to use the controls; check whether a base unit is required. |
With a small desk, I want to leave enough room for my existing controls and for mounting the panel. Around 27% of consumers put the space needed for their setup first. |
| Approach settings |
Check the simulator version, aircraft profile and any plug-ins or configuration requirements. |
If I want to adjust radio, navigation or autopilot settings during an approach, I’ll check how those functions are controlled on the panel. Around 20% of consumers prioritise approach settings. |
| Reading instruments |
Check which data is visible at the same time and what display, power or software connections are needed. |
If I want to read flight or navigation data outside the main display, I’ll want to know which views I can use at the same time. Around 20% of consumers prioritise viewing instruments separately. |
Common mistakes when choosing a panel
-
Buying an add-on as if it were a standalone panel
According to Thrustmaster, the Thrustmaster TCA Quadrant Add-On Airbus Edition is an add-on for the TCA Quadrant Airbus Edition. The controls won’t be complete without that base unit.
Before you buy, check whether you already have the base unit and whether the complete setup will fit on your desk.
-
Assuming switchable instruments can all be displayed at once
Logitech G describes 15 selectable readouts on a single Instrument Panel. For several panel displays at once, Logitech G says you’ll need additional units.
Decide which data you want to see at the same time during landing before choosing a display solution.
-
Measuring only the casing or forgetting about connections
The dimensions given for the Honeycomb Bravo don’t include the mounting plate or clamp. RealSimGear specifies a plug-in and video connection for the GNS530; an HDMI cable isn’t included.
Measure the complete setup and check the connections and installation steps required.
Allow space for mounting and cables, and make sure you can access a suitable video connection.
-
Assuming it will work in every simulator because it works in one
Logitech G specifically links the described landing gear status LEDs on the Switch Panel to FSX and Prepar3D. This doesn’t confirm that the same indicator will work in another simulator.
For each panel, simulator version and aircraft, check both the switch action and any status indicator.
Brands to compare
Logitech G
Separate panels for switches, autopilot controls and instrument displays.
- According to Logitech G, the Switch Panel controls functions including the landing gear, while the Multi Panel is designed for functions such as autopilot and flaps.
- According to Logitech G, the Multi Panel requires a plug-in. The 15 readouts on one Instrument Panel are switchable, not all visible at the same time.
Octavi
The IFR-1 combines navigation, radio and autopilot controls in a compact controller.
- Octavi lists dimensions of 112 × 74 × 46 mm and support for MSFS 2020/2024 and X-Plane 11/12.
- Several functions share the controller through context modes; it isn’t a separate instrument display or landing gear lever.
MOZA Racing
The MTLP is an F/A-18-inspired landing panel with configurable switches.
- MOZA specifies 25 programmable switch signals and dimensions of 196,5 × 134,7 × 149 mm.
- MOZA describes the MTLP as a PC product. Bear the configuration in mind and check that its functions suit your virtual aircraft.
Honeycomb Aeronautical
The Bravo Throttle Quadrant combines throttle levers with controls including autopilot functions.
- Honeycomb lists support for PC and Mac; according to the manufacturer, Xbox use requires the Alpha XPC and Xbox Hub.
- The stated dimensions are 273 × 382 × 198 mm, excluding the mounting plate or clamp. Measure the space available for the complete setup.
Thrustmaster
The TCA Quadrant Add-On Airbus Edition adds Airbus-style controls to a compatible quadrant setup.
- Thrustmaster lists controls for functions including flaps, speedbrake and landing gear.
- It’s an add-on for the TCA Quadrant Airbus Edition, not a standalone panel. Check whether you already have the base unit.
RealSimGear
The GNS530 is a specialist replica for anyone who wants to operate a simulated navigator.
- RealSimGear lists support for Microsoft Flight Simulator 2020 and 2024.
- According to RealSimGear, a plug-in and video connection are required; an HDMI cable isn’t included.
Related products on Joybuy
Related products coming soon.
Frequently asked questions
Do you need a switch, autopilot or instrument panel for your virtual aircraft?
Choose one based on the task you want to carry out. Logitech G describes the Switch Panel as suitable for functions including landing gear controls, the Multi Panel for functions including autopilot, flaps and trim, and the Instrument Panel for selectable flight data. Check that the functions you want work with your aircraft and simulator.
How do you set up a new panel for landings?
First, check which simulator version is supported and which aircraft profile you’ve selected. Logitech G specifies a plug-in for the Multi Panel; for the MTLP, MOZA describes a USB connection and switch configuration in MOZA Cockpit. Test the assigned functions in the simulator before relying on them during an approach.
Can you use a panel with a USB connection on a console?
Not without product-specific confirmation. For using the Bravo with Xbox, Honeycomb specifies the Alpha XPC and Xbox Hub; MOZA describes the MTLP as a PC product. Check what additional hardware is required for the exact panel and your console.
What if a panel bought online doesn’t suit your setup or breaks prematurely?
According to ACM ConsuWijzer, online consumer purchases generally come with a 14-day cooling-off period from delivery, subject to legal exceptions. A product must also meet what you could reasonably expect from it; if it has a fault and these conditions are met, the seller must offer a solution. Check who the seller is and which terms apply to your order.
Is CE marking compulsory for every simulator panel?
No, not automatically for every type of product. Dutch government information states that CE marking is compulsory for products covered by an applicable CE product category. Check the requirements for the exact product; electrical and electronic equipment may be subject to specific safety and conformity rules.
Do home landings using a flight simulator panel count as recognised flight training?
Don’t assume they do. The Human Environment and Transport Inspectorate describes a qualification certificate for operators of an FSTD, as well as separate requirements for organisations that use such devices for training. These rules don’t automatically make an ordinary home panel a qualified training aid.