Who are these panels for?

Regional IFR simmer

You want to adjust autopilot settings using physical buttons during a long virtual route, rather than repeatedly opening the cockpit on screen.

Radio and route operator

You regularly change virtual radio frequencies or operate a specific navigator. These are different tasks, and they don’t necessarily call for the same panel.

Instrument-focused cockpit builder

You want to view flight data separately and are comparing a dedicated instrument display with a configurable panel on an existing screen.

What should you look for?

Separate autopilot panel

A good fit if: you often adjust autopilot settings on regional routes and your throttle already meets your needs.

Keep in mind: Logitech describes the Multi Panel as a control for the autopilot and trim; it doesn’t replace a radio panel. Check that it supports your simulator version and aircraft.

Radio panel or aircraft-specific navigator

A good fit if: you often change COM and NAV frequencies, or want to operate a specific simulated navigator.

Keep in mind: Logitech lists COM/NAV and additional radio controls for its Radio Panel, not full GPS route entry. The RealSimGear GNS530 is designed for a compatible GNS530 setup and, according to the manufacturer, requires a plug-in, power supply and display connection.

Combined throttle and autopilot

A good fit if: you need configurable throttle levers as well as panel controls.

Keep in mind: Honeycomb gives the Bravo’s base dimensions as 273 × 382 mm, excluding the mounting plate and clamp. Be sure to measure the space you’ll need for the complete setup.

Instrument display or software panel

A good fit if: you want to make flight data easier to see and physical route controls are less important.

Keep in mind: the Logitech Instrument Panel is a physical display; Sim Innovations’ Air Manager is software for configurable 2D panels on existing screens.

First, decide which action or information matters most to you. Then check aircraft and simulator support, the connections you’ll need, and the space available.

What to consider What to look for when buying Who this matters to
Autopilot Check that the functions, plug-in and virtual aircraft are supported. If I want to adjust settings using physical buttons while en route, an autopilot panel takes priority. Around 33% of consumers put these controls first.
Radio and navigation Compare the COM/NAV controls with the navigator used by your aircraft; check the software and connections. If you change frequencies en route or operate a specific navigator, consider these as two separate tasks. Around 27% of consumers prioritise radio or navigator controls.
Reading instruments Decide which instruments you need to see at the same time, and whether you want a separate display or to use an existing screen. If I want to keep flight data in view separately, I compare a physical display with software on my own screen. Around 20% of consumers put instrument visibility first.
Space and setup Measure your desk, including the clamp and mounting plate; also check platform support and the connections required. If you need a setup that works for long sessions, the available space and compatibility with your existing controls both matter. Around 20% of consumers make this their top priority.

Common mistakes

  • Assuming autopilot, radio and instrument panels are interchangeable

    These panels are designed for different control and display tasks. Buying one panel doesn’t mean you’ll also get the functions of the others.

    First, note which action you want to perform physically or which information you want to view separately. Only then compare models.

    You may need a second device to get a missing function.

  • Checking only the device dimensions or USB connection

    Honeycomb’s listed dimensions for the Bravo exclude the clamp and mounting plate. For the RealSimGear GNS530, the manufacturer states that an HDMI cable isn’t included.

    Measure the full desk space and check what power supply, display connections, cables and mounting hardware your setup requires.

    A device with extra connections may also need more configuration or space.

  • Assuming general simulator compatibility guarantees support for every aircraft

    A device profile may not be available; Microsoft Flight Simulator explains that you’ll need to assign functions manually in that case. Specific navigation hardware may also require its own plug-in.

    Before relying on the panel, check its functions in the simulator version you plan to use and with the exact virtual aircraft.

    Setup may take extra time.

Brands to consider

Logitech G

Offers separate Flight Multi, Radio and Instrument Panels for anyone looking to add a specific cockpit function.

  • According to Logitech, the Multi Panel controls the autopilot and trim; the Radio Panel focuses on radio functions, while the Instrument Panel displays instruments.
  • These are separate products. Check plug-in and aircraft support for each panel.

Honeycomb Aeronautical

According to Honeycomb, the Bravo Throttle Quadrant combines configurable levers with an autopilot panel.

  • Honeycomb lists controls for several types of aircraft and 14 status indicator lights.
  • The listed dimensions exclude the clamp and mounting plate. For Xbox use, Honeycomb specifies that the Alpha XPC and Xbox Hub are required.

RealSimGear

The GNS530 replica is designed for a cockpit built around that specific simulated navigator.

  • According to RealSimGear, the device has its own buttons and display.
  • The manufacturer specifies a plug-in and display connection; an HDMI cable isn’t included. The installation guide lists a power adapter with a North American plug type. Check which power supply is suitable for your setup in the Netherlands.

Sim Innovations

Air Manager 5 Desktop is software for running instrument panels on existing screens.

  • Sim Innovations lists support for MSFS 2020 and 2024, and X-Plane, with configurable 2D panels.
  • It isn’t a standalone physical display; you’ll need to set up the screen layout and arrange the instruments yourself.

FlightSimBuilder

The TNxi 8X is designed for anyone considering a more advanced avionics device with aircraft-specific profiles.

  • FlightSimBuilder lists G1000 and G1000 NXi profiles, among others, as well as an optional touchscreen version.
  • The installation instructions list USB, HDMI, power and Hub setup. Check support for the aircraft you intend to use and what’s included for your setup.

Joybuy products

Related products coming soon.

Frequently asked questions

Will every PC panel work with Xbox?

No. PC support doesn’t prove that a panel will work with Xbox too. Microsoft Flight Simulator warns that most PC peripherals aren’t compatible with Xbox Series X|S unless the manufacturer explicitly says they are. For the Bravo, Honeycomb specifies that the Alpha XPC and Xbox Hub are required.

What do you need to install before the buttons work in MSFS 2024?

Follow the instructions for your exact device and check its functions in the simulator. Microsoft Flight Simulator says you’ll need to assign functions manually if there’s no automatic device profile. RealSimGear also requires its own plug-in for the GNS530.

Can you use a GNS530 on your desk without extra connections?

According to RealSimGear, the GNS530 needs a display connection and a separate power adapter, among other things; the HDMI cable isn’t included. The installation guide lists an adapter with a North American plug type. So before buying, check which power supply is suitable for your setup in the Netherlands.

What are your rights when buying online in the Netherlands?

For eligible distance purchases from a business, the Government of the Netherlands says you generally have a 14-day cooling-off period, although exceptions may apply. You’re also entitled to a product that meets reasonable expectations. The Government of the Netherlands states that there’s no fixed statutory guarantee period for all products in the Netherlands; if something is faulty, contact the seller.