Start by deciding what you want to see on your extra monitors: the outside view, instruments or controls. A configurable software panel is suited to instruments on a separate screen, while a physical instrument, radio or switch panel is better for a fixed display or hands-on controls. You can combine the two if you need both, but first check that they’re compatible with your simulator, aircraft, connections and any plug-ins.
Who is this guide for?
Circuit flyer with extra screens
You want to spread the outside view and cockpit information across multiple monitors. Microsoft Flight Simulator documentation describes additional render windows for MSFS 2020, while Laminar Research discusses multi-monitor setups for X-Plane 12.
Instrument practice
You want instruments to stay in a fixed position and be easy to read during a circuit, so you’re comparing a configurable on-screen panel with a separate instrument panel. Sim Innovations describes configurable 2D panels, while Logitech G and FlightSimBuilder describe separate instrument products.
Cockpit builder focused on controls
You want to operate radio, navigation or aircraft functions physically, and need to check that the controls match the aircraft you’re simulating. Logitech G and RealSimGear describe radio, switch and navigation controls, among other products.
What should you look for when choosing?
First decide what each screen is for, then choose a panel. This helps you avoid confusing an instrument panel with a solution for adding an outside view.
| Key consideration |
What should you check? |
Who is this important for? |
| Screen layout |
Decide whether each monitor will show the outside view or instruments. Check the capabilities of your simulator version and the video outputs available. |
If I want to spread the outside view and cockpit information across multiple screens, I first need to know what each screen will be used for. Around 31% of consumers prioritise screen layout. |
| Reading instruments |
Compare a configurable panel on a monitor with a separate instrument. Check which readings are visible at the same time and whether the layout suits your aircraft. |
If I want to read instruments that suit my training aircraft from a fixed position during circuits, I focus on the layout and how many readings are visible at once. Around 25% of consumers prioritise reading instruments. |
| Physical controls |
Choose according to the task: COM/NAV, a specific navigator or switches. Check which functions work with each device, simulator and aircraft. |
If I want to operate the radio, navigation or aircraft functions with buttons during a circuit, I look for a panel suited to those tasks. Around 25% of consumers prioritise physical controls. |
| Connections and components |
Check the video output, USB connections, software and plug-ins required, and see what’s included with the exact version. |
If I want to use my existing computer and monitors, I need to know in advance what connections and components my chosen setup requires. Around 19% of consumers start with installation and the full package. |
Common buying mistakes
-
Confusing an instrument panel with an extra outside view
An instrument app and an additional render window serve different purposes. Microsoft Flight Simulator documents additional render windows for MSFS 2020; this information alone doesn’t confirm that the same approach works for MSFS 2024.
First map out what each screen needs to show, then check the settings for your simulator version.
Your setup may need a different monitor layout or an extra video output.
-
Expecting one compact instrument panel to show every gauge at once
According to Logitech G, the Flight Simulator Instrument Panel has 15 selectable views, so one panel won’t necessarily give you a complete instrument board with everything visible at once.
Decide which readings you want to see at the same time during a circuit, then compare your needs with the views available on your chosen device.
You may need extra instrument units or a larger screen to display multiple panels at once.
-
Choosing a GNS530 without checking connections and power
RealSimGear lists an HDMI connection and a required plug-in for the GNS530; the manufacturer says the HDMI cable isn’t included. The installation guide specifies a power adapter with a North American plug configuration.
Check that you have a spare video output, what’s included in the offer and whether the power supply is suitable for the version supplied.
Allow for a separate HDMI cable, and check that the supplied plug is suitable for your setup.
-
Ordering a cockpit shell as a complete panel
FlightSimBuilder states that the controls and avionics are sold separately with the Model 172 v2 - Panel Only.
Check what’s included with each version and whether the cut-outs fit the devices you want to install.
With this Panel Only version, you’ll need to source the controls and avionics separately.
Brands and product ranges to compare
Sim Innovations
Air Manager is a software-based option for configurable 2D instrument panels on one or more screens.
- Sim Innovations describes support for X-Plane and MSFS 2020/2024, as well as the option to place panels on a selected monitor.
- According to the provider, the desktop version is intended for home use. The manual states that some panels are paid add-ons, so check the licence and the panels you’ll need.
Logitech G
Offers separate Flight Instrument, Radio and Switch Panels for specific readouts or hands-on control.
- According to Logitech G, the Flight Simulator Instrument Panel has a 3.5-inch screen with 15 selectable views. The Radio Panel operates COM and NAV functions, among others.
- One Instrument Panel is not the same as a complete instrument board showing every reading at once. Check compatibility with your simulator version and aircraft.
RealSimGear
The GNS530 is a specialist physical interface for practising with the controls of a compatible simulated navigator.
- RealSimGear lists support for X-Plane 11/12 on Windows and MSFS 2020/2024.
- The manufacturer specifies a plug-in and HDMI connection; the HDMI cable isn’t included. Also check that the power supply is suitable for the version supplied.
FlightSimBuilder
Offers a separate analogue instrument unit and the Model 172 v2 - Panel Only, a panel shell for a more extensive Cessna 172 setup.
- The manufacturer lists support for MSFS 2020/2024 and X-Plane for Steam Gauges.
- FlightSimBuilder says its own launcher only works on Windows, and the standard layouts are limited. The controls and avionics are sold separately with the Model 172 v2 - Panel Only.
Related Joybuy products
Related products will be available soon.
Frequently asked questions
Can an extra monitor show the outside view while another displays the instruments?
These are two separate configuration choices. The official Microsoft Flight Simulator documentation describes additional render windows for MSFS 2020; Sim Innovations describes instrument panels that you can place on a selected monitor, with support for MSFS 2020/2024 and X-Plane. Check the setup for your simulator version and the video outputs available.
What do you need to install for a software panel or GNS530?
For Air Manager, Sim Innovations describes configuring panels and simulator connections through plug-ins. RealSimGear specifies its own plug-in and an HDMI connection for the GNS530. Also check the connections and power supply for the specific version.
What if a panel bought online isn’t right for your setup?
For online consumer purchases in the Netherlands, you’ll often have a 14-day cooling-off period. The Dutch Government lists exceptions and makes distinctions based on the seller and type of purchase, among other factors, so check which terms apply to your order.
Does circuit practice on your home setup count as formal simulator training?
Don’t assume that practising with a consumer panel counts as formal simulator training. The Human Environment and Transport Inspectorate describes qualification requirements for operators of a Flight Simulation Training Device, as well as separate rules for approved training organisations. Ask the training provider which equipment and rules apply to training hours.