Start with the controls you actually want to use during a virtual landing: landing gear switches alone, flaps and trim as well, or a more comprehensive throttle and autopilot system. Then check compatibility with your platform and simulator, whether any base units are required, and the space available for mounting. More features don’t automatically make a panel a better fit for your setup.
Who are these panels for?
For those who mainly want to operate the landing gear
You already have a primary flight controller and are looking for extra physical switches or a lever for the landing gear and other aircraft functions. Logitech G and MOZA describe panels with these additional controls.
Cockpit builders for civil aviation
You want to operate the throttle, flaps, trim or autopilot physically during approaches, and have room for a more comprehensive panel. Honeycomb Aeronautical describes the Bravo Throttle Quadrant as combining these types of controls.
Airbus simmers with a quadrant
You use the TCA Quadrant Airbus Edition, or are planning to buy it alongside extra controls for flaps, speedbrake and landing gear. Thrustmaster describes the TCA Quadrant Add-On Airbus Edition as an expansion for that base unit.
What should you look for when choosing?
Standalone switch or landing gear panel
A good fit if: you already have a yoke or another primary flight controller and are mainly looking for extra physical landing gear controls.
Trade-off: the panel doesn’t replace a yoke or throttle; features and simulator support vary by model.
Combined throttle and autopilot panel
A good fit if: you want throttle, trim and autopilot controls alongside the landing gear and flaps, all in the same setup.
Trade-off: at 273 × 382 mm, excluding mounting parts, the Honeycomb Bravo takes up more space than a standalone panel.
Airbus expansion for an existing quadrant
A good fit if: you have the TCA Quadrant Airbus Edition or are deliberately buying it alongside the expansion.
Trade-off: Thrustmaster states that the add-on must be connected to the TCA Quadrant Airbus Edition for use on PC and Xbox.
Autopilot and trim controls
A good fit if: you mainly want to add physical autopilot, flap and trim controls for approaches.
Trade-off: the Logitech G Flight Multi Panel isn’t the same as a panel specified with a landing gear lever; check the software requirements for your simulator.
| What to consider |
What should you check? |
Who should consider this? |
| Landing functions |
Check which controls the model offers and whether you can assign those functions to your aircraft and simulator. |
If you mainly want to operate the landing gear or other switches directly during approaches, pay attention to the exact layout of the controls. Around 36% of consumers prioritise physical landing controls. |
| Compatibility |
Make a note of your platform and simulator version; also check the required software and any base units. MOZA describes the MTLP as a USB panel for PC, while the Thrustmaster add-on requires a TCA Quadrant Airbus Edition. |
If you want to keep using your existing controller, platform and simulator, check the requirements for the exact model. Around 29% of consumers cite compatibility as their main consideration. |
| How many controls you’re adding |
Compare the controls included with what you already have in your cockpit; an add-on isn’t automatically a complete controller. |
If you want to operate the throttle, flaps, trim or autopilot as well as a landing gear switch, check which controls a single purchase actually adds. Around 21% of consumers give complete flight controls top priority. |
| Space and mounting |
Measure the space available and allow for mounting parts. Honeycomb lists the Bravo as measuring 273 × 382 × 198 mm, excluding the mounting plate or clamp; MOZA lists the MTLP as 196,5 × 134,7 × 149 mm and describes the desk clamp as optional. |
If you want to mount the panel in your gaming room setup, you’ll need to know whether it fits alongside your existing controls and cables. Around 14% of consumers prioritise fit and mounting. |
Common buying mistakes
-
Mistaking an Airbus add-on for a standalone panel
Thrustmaster states that the TCA Quadrant Add-On Airbus Edition must be connected via the TCA Quadrant Airbus Edition for use on PC and Xbox.
Check the full product name and whether you already have the required base unit.
If you don’t have that base unit yet, factor it into your choice alongside the add-on.
-
Assuming status lights work in every simulator
Support varies by panel and simulator. Logitech describes the Switch Panel’s gear status LEDs specifically for FSX and Prepar3D; Honeycomb has published landing gear LED updates with separate versions for Microsoft Flight Simulator 2020 and 2024.
Check support for both inputs and indicators in your exact simulator version.
-
Measuring only the panel itself
Mounting parts can change how much space you need. Honeycomb lists the Bravo’s dimensions excluding the mounting plate or metal clamp; MOZA describes the desk clamp for the MTLP as optional.
Measure the space needed for the complete installation, including room for existing controls and cables.
You may need a separate desk clamp or another mounting solution for the MOZA MTLP.
Brands to compare
Logitech G
Standalone panels for switches, landing gear and autopilot controls.
- Logitech G describes a landing gear lever for the Flight Switch Panel, and physical autopilot, flap and trim controls for the Multi Panel.
- The manufacturer describes the Switch Panel’s gear status LEDs specifically for FSX and Prepar3D; check that they work with your simulator.
- For the Multi Panel, Logitech G specifies a plug-in for supported PC simulators.
MOZA
The MTLP is a standalone, F/A-18-inspired landing panel for PC.
- MOZA specifies 25 programmable switch signals and a standalone USB connection.
- Its layout is specialised and doesn’t replace a primary flight controller; check that the functions suit the aircraft you’re simulating.
- MOZA describes the desk clamp as optional.
Honeycomb Aeronautical
The Bravo Throttle Quadrant combines throttle and other flight controls for civil aircraft, among others.
- Honeycomb specifies interchangeable lever configurations and a panel with 14 indicator lights.
- Allow for mounting space; the stated dimensions of 273 × 382 × 198 mm exclude the mounting plate or clamp.
- For Xbox, Honeycomb specifies additional Alpha XPC and Xbox Hub hardware.
Thrustmaster
The TCA Quadrant Add-On Airbus Edition adds Airbus-style controls for flaps, speedbrake and landing gear.
- Its functions are designed for controls suited to Airbus-style setups.
- Thrustmaster states that the add-on must be connected to the separate TCA Quadrant Airbus Edition for use on PC and Xbox.
Turtle Beach
VelocityOne Flight is an integrated system with a yoke, throttle and trim, not just a standalone landing panel.
- Turtle Beach specifies controls for PC and Xbox, and a Status Indicator Panel for PC.
- An integrated control system isn’t necessarily a replacement for every specialised landing panel; don’t assume that the status indicators work on Xbox based on the PC specification.
Joybuy products
Related products coming soon.
Frequently asked questions
Can I connect a Thrustmaster Airbus add-on directly to my PC?
No. Thrustmaster requires it to be connected to the TCA Quadrant Airbus Edition for use on PC or Xbox; check that you have this base unit before buying.
What should I check if the landing gear lights aren’t working?
First, check the panel model and simulator version. Honeycomb has published Bravo landing gear LED updates with separate versions for Microsoft Flight Simulator 2020 and 2024. Logitech G describes the Switch Panel’s gear status LEDs specifically for FSX and Prepar3D, so don’t assume they’ll work the same way in other simulators.
What cooling-off period applies when buying a flight simulator panel online in the Netherlands?
When you buy online from a business, you’re often entitled to a statutory 14-day cooling-off period after delivery, according to ACM ConsuWijzer and the Dutch government. There are exceptions, so check which rules apply to your purchase.
Does a CE logo prove that an authority has approved the electronic panel?
No. According to information from the Dutch government, CE marking is the manufacturer’s declaration that an applicable product meets the relevant EU requirements. The requirements depend on the product; don’t assume it complies based on a product image alone.