Radio frequency practice
You mainly want to set frequencies physically during simulated navigation and have room for one separate module, but not a full cockpit.
Start by deciding which navigation task you want to practise: setting radio frequencies, reading instruments or operating a GPS. Logitech G describes its radio panel and instrument display as separate products; a GPS replica and configurable software panel are other options. Then check that the features suit your simulator and virtual aircraft, and measure the space you’ll need, including the mount and cables.
You mainly want to set frequencies physically during simulated navigation and have room for one separate module, but not a full cockpit.
You want to practise using the buttons and menus of a specific virtual navigator, so you check the aircraft, software and connections.
You share a small desk with other activities or switch between aircraft. A portable module or a configurable display on an existing screen may be worth considering.
Choose this if: you mainly want to set COM and NAV frequencies using rotary controls. Logitech G lists controls for COM1/2 and NAV1/2, among other features.
Bear in mind: this isn’t a GPS screen for flight plans and takes up desk space of its own.
Choose this if: you want to read a selected flight instrument, such as a VOR or HSI, away from your main screen. Logitech G lists a 3.5-inch LCD with selectable displays.
Bear in mind: one unit doesn’t show every display at once; additional units need extra space.
Choose this if: you want to practise using a GNS530 in a compatible virtual aircraft. RealSimGear describes physical controls for tasks such as flight plans and procedures.
Bear in mind: the setup requires a plug-in and a display connection; the HDMI cable isn’t included.
Choose this if: you switch between aircraft types or instrument layouts and can use an existing screen. Sim Innovations describes Air Manager as software for creating your own 2D panels.
Bear in mind: you’ll need to set up the panel layout and connection; check what your chosen version can do.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Desk space | Measure the available width and depth, including the mount and cable routing. Also consider whether you can share an existing screen. | If I need my desk for other work too, I want to be able to fit away or put away the module and cables. Around 30% of consumers say desk space is their top priority. |
| Radio frequencies | Check that the COM, NAV or other radio functions you need match your virtual aircraft and simulator. | If I mainly want to set frequencies physically, I look for controls that suit my aircraft configuration. Around 30% of consumers put radio frequencies first. |
| GPS procedures | Check that the panel works with your virtual navigator and that the plug-in, ports, cables and any mount are compatible with your setup. | If I want to practise a specific GPS procedure, using the right navigator is my main concern. Around 30% of consumers prioritise GPS procedures. |
| Instrument displays | Decide which instruments you need to read at the same time and whether switching between displays on one unit will be enough. | If I want to read individual instruments during a practice session, I check which displays are available and whether I’ll need to switch between them. Around 10% of consumers choose instrument reading as their main consideration. |
A radio panel is designed for radio and frequency controls. A GNS530 replica is a separate option for operating a specific navigator and its associated functions.
Make a note of the tasks you want to practise in your virtual aircraft, then compare them with the panel’s features.
The stated dimensions of the RealSimGear GNS530 are 158 × 118 mm for the unit itself. The stand, cable routing and available display connection also determine whether the complete setup will fit. RealSimGear states that an HDMI cable isn’t included.
Measure the unit with its stand and cable routing, and check which display connection is available before you buy.
Logitech G describes 15 selectable displays for the Flight Instrument Panel. For multiple instrument displays at the same time, Logitech G recommends additional units.
Decide which readings you want to see at the same time during a practice session, and whether switching between them on one display will be enough.
FlightSimBuilder distinguishes between TNxi 8X versions with and without a touchscreen. For the TDS GTN profile mentioned, the manufacturer specifies an additional licence.
Check the exact version and the licence terms for the profile you want to use.
Offers separate Flight Sim panels for radio frequencies and instrument displays. They are different products for different control needs.
Makes GNS530 navigator hardware, among other products, for those who want to practise using the controls of a compatible virtual GPS.
Offers Air Manager software for creating instrument panels on a screen. According to the manufacturer, the separate Knobster adds rotary controls for compatible panels.
According to FlightSimBuilder, the TNxi 8X range is designed to support multiple avionics profiles within one hardware panel.
No, a physical module isn’t the only option. Microsoft Flight Simulator lists available space as one factor when choosing a hardware setup. If you mainly want a configurable instrument layout, you could consider software such as Air Manager. If you want physical buttons, compare the hardware with the controls you want to practise using.
Check that the software, cables, ports and mounting are compatible with your simulator and virtual aircraft. For the GNS530 in Microsoft Flight Simulator, RealSimGear describes a plug-in and configuration process; the manufacturer also states that an HDMI cable isn’t included. After making changes to your simulator, check again that the controls you need are working.
Not for every product without exception. The Dutch Government states that CE marking is compulsory for certain product groups, but doesn’t apply to all products. For a specific panel, check which product requirements apply to that version; don’t infer its status from a general category description alone.
Don’t assume that a consumer panel will count towards training credits. The Human Environment and Transport Inspectorate outlines qualification requirements for flight simulator operators, as well as separate requirements for organisations that use such devices for training. Ask a specific training provider which device and programme are recognised for your course.