Start by checking how much floor space you have, then decide whether you need just a rudder axis or separate left and right toe brakes as well. A compact set with a single axis is not a replacement for pedals with separate brake axes. Also check that it connects to your PC or console, then assign the axes in your simulator once connected. This advice is about virtual controls, not suitability for real flight training.
Who are these pedals for?
Pilots with limited foot space
You practise virtual cockpit procedures under a desk and want to know whether the pedals and your feet will have room to move. VKB FSC Europe describes the T-Rudder Mk.V as designed for limited space under a desk; for other sets, check the listed external dimensions.
Pilots practising rudder and brake checks
You want to use rudder input during simulator checks and may also want to operate the left and right brakes separately. X-Plane describes separate assignments for these axes, so check which axes the pedal set itself offers.
Pilots with an existing console setup
You’re adding pedals to an existing console setup and want to know whether the full connection chain will work. Some models require a specific controller or hub, according to the manufacturer.
What should you look for when choosing?
First measure the space around your seat, then decide whether your checks require only rudder input or separate brake controls as well. Finally, check the connection and assignments in your simulator.
| What to consider |
What to look for when buying |
Who is this important for? |
| Space and stability |
Measure the width and depth of the floor space and leave room for your feet and chair. Compare the external dimensions of the exact set; pedal spacing is not the same as overall width. |
If you use pedals under a desk, you’ll want them to fit without getting in the way of your feet or chair. Around 31% of consumers put available space first. |
| Clear rudder input |
Check that the set has a separate rudder axis. Move the pedals once connected, then assign the moving axis to yaw or rudder in your simulator. |
For virtual checks where you want to see and verify rudder input, a clearly identifiable rudder axis is essential. Around 25% of consumers prioritise this. |
| Connection to existing equipment |
Check how the pedals connect to your PC or console and compare this with your existing stick, yoke, controller and any hub. |
If you want to add pedals to your existing controls, you’ll want to know whether the complete connection chain will work. Around 25% of consumers start by checking compatibility. |
| Separate toe brakes |
Check whether the exact model has separate left and right brake axes, then assign each one separately in your simulator. |
If you want to practise using both brakes separately, you’ll need separate controls for them. Around 19% of consumers prioritise these brake checks. |
Buying pitfalls
-
Confusing pedal spacing with overall width
The adjustable pedal spacing of 350–450 mm listed by Turtle Beach for the VelocityOne Rudder is not its total external width. Honeycomb lists external dimensions of 498 × 457 × 210 mm for the Charlie, so these figures do not describe the same measurement.
Compare external width and depth on a like-for-like basis, and leave enough room for your feet and chair to move.
-
Assuming ‘Xbox compatible’ means it connects on its own
Requirements vary by model: Turtle Beach specifies the VelocityOne Flight System for the VelocityOne Rudder, while Honeycomb specifies the Alpha XPC and Xbox Hub for the Charlie.
Check the full connection chain and what’s included with the exact set, rather than relying on the platform compatibility claim alone.
Depending on your existing equipment, you may need an additional controller or hub to use the pedals with Xbox.
-
Confusing a single rudder axis with separate brake axes
According to its product specifications, the VKB T-Rudder Mk.V has one analogue axis. This means it does not have separate hardware axes for the left and right toe brakes.
Decide in advance whether your checks cover rudder movement only or both brakes separately as well.
-
Assuming that connecting the pedals means your simulator checks will work straight away
You may still need to assign an axis manually, or it may conflict with an existing joystick assignment. Microsoft Flight Simulator notes that manual assignment may be necessary if there is no suitable controller profile.
Once connected, test each intended axis separately and check for existing assignments.
Brands to consider
VKB
According to VKB FSC Europe, the T-Rudder Mk.V is aimed at flight sim enthusiasts with limited space under their desk who need a single rudder axis.
- The specifications list one analogue axis and an included BlackBox Mk.3.
- According to VKB FSC Europe, older BlackBox Mk.1 and Mk.2 variants are not compatible with the Mk.V; the set does not offer separate toe brake axes.
Thrustmaster
According to Thrustmaster, the T.Flight Rudder Pedals combine rudder control with differential braking.
- The heel rests are removable, giving you the option of a different foot position.
- The connection method depends on the platform and equipment you use; check which controller or adapter your setup requires.
Logitech G
The Flight Sim Rudder Pedals are designed for PC users who want to combine rudder control with separate brake controls.
- Logitech lists adjustable footrests, non-slip material, adjustable resistance and independently operated left and right brakes.
- These features alone don’t tell you whether the external dimensions will fit every compact cockpit, so measure your available space.
Turtle Beach
According to Turtle Beach, the VelocityOne Rudder offers adjustable pedal spacing and separate brakes.
- The manual states that pedal spacing can be adjusted from 350 to 450 mm.
- This spacing is not the total external width. According to Turtle Beach, the VelocityOne Flight System is required for Xbox use.
Honeycomb Aeronautical
According to Honeycomb, the Charlie Rudder Pedals combine adjustable tension with foot brakes.
- Honeycomb lists features designed to provide grip on both smooth floors and carpet.
- The listed external dimensions are 498 × 457 × 210 mm. According to Honeycomb, Xbox use requires both the Alpha XPC and Xbox Hub.
Joybuy products
Related products coming soon.
Frequently asked questions
Do you need separate toe brakes for virtual cockpit checks?
No, not for a check that only requires rudder input. If you also want to check the left and right brakes separately, choose a set with those hardware axes and assign them separately in your simulator. According to its product specifications, the VKB T-Rudder Mk.V has one analogue axis.
How do you set up the pedals once they’re connected?
Move each pedal separately in your simulator and assign the moving axis to the intended function. X-Plane describes yaw and both toe brakes as separate assignments. Microsoft Flight Simulator may require manual assignment if there is no suitable profile; also check for conflicting bindings.
Do you need anything else to use the pedals with a console?
That depends on the model and your existing equipment. For the VelocityOne Rudder, Turtle Beach requires the VelocityOne Flight System for Xbox use; for the Charlie, Honeycomb specifies both the Alpha XPC and Xbox Hub. Check which components you already have and what’s included with the set on offer.
What consumer rights apply in the Netherlands when buying pedals online?
According to the Dutch government, for many distance purchases you have a 14-day cooling-off period; check the applicable terms and exceptions. You’re also entitled to a product that is of satisfactory quality, and if there’s a fault you can contact the seller for a solution. The Netherlands does not have a single fixed statutory guarantee period that applies to all products.