Practising with frequencies
You want to set and switch COM frequencies during simulated radio procedures without having to keep searching for cockpit buttons with your mouse. Logitech G and Octavi describe panels with COM controls.
For practising COM frequencies, a dedicated radio panel is an obvious choice; a multi-function controller is a better fit if you also want to operate other cockpit functions. A G1000 audio panel is designed for audio selection in a G1000 setup and does not automatically replace a frequency controller. Before buying, check that your simulator version, aircraft and required software are compatible. For voice communication, you’ll need a separate audio and microphone setup.
You want to set and switch COM frequencies during simulated radio procedures without having to keep searching for cockpit buttons with your mouse. Logitech G and Octavi describe panels with COM controls.
You want a setup that fits alongside other things on a bedroom desk and can be put away after use. The dimensions, connections and space for separate audio equipment all need to be considered.
You use a simulated G1000 cockpit and are specifically looking for audio controls, not just a way to change frequencies. FlightSimBuilder describes its panel as being for this specific purpose.
Best for: mainly setting and switching COM frequencies using controls on a separate panel.
Trade-off: check that the plug-in works with your simulator version, and allow enough space for the panel.
Best for: operating the radio and other cockpit settings with a single controller.
Trade-off: on a controller with context-sensitive buttons, their functions change depending on the selected mode; a profile-based controller requires configuration.
Best for: replicating audio selection in a specific G1000 cockpit setup.
Trade-off: it is not automatically a general-purpose controller for setting COM frequencies.
Start with the tasks you want to practise, then check that the controls, software and complete setup are right for your simulator and shared desk.
| Consideration | What to check before buying | Which shoppers should pay particular attention? |
|---|---|---|
| Setting COM frequencies | Check that COM1/2 and your preferred way of switching frequencies work with the aircraft you’re simulating. | I mainly want to set and switch frequencies during radio procedures. Around 33% of shoppers prioritise direct COM controls. |
| Space on a shared desk | Measure the available space and allow for mounting, cables, power and separate audio equipment. | I need to be able to put the controls away and share the space with someone else. Around 27% of shoppers focus on the complete setup and using audio in the bedroom. |
| Compatibility with your simulator and aircraft | Check the exact simulator version, aircraft, computer platform and any required plug-in, hub or profile. | I want the controls to work with the simulator and aircraft I already use. Around 27% of shoppers make compatibility their first requirement. |
| G1000 audio controls | Distinguish between setting frequencies and selecting audio sources; also check which functions are supported in your simulator. | I’m looking for audio selection for a specific G1000 setup, not a general-purpose frequency controller. Around 13% of shoppers specifically prioritise these audio controls. |
Selecting audio and setting frequencies are two different control tasks. A G1000 audio panel is designed for a specific cockpit setup.
Write down the radio tasks you want to practise and compare them with the documented functions of the exact model.
You may need additional cockpit components for other tasks you want to perform.
You may need a plug-in, hub or profile. According to the product listing, the separately sold SideshowFX Stream Deck + profile is designed for MSFS 2024 on Windows.
Check your simulator version, computer platform, aircraft and required software as a complete combination.
Allow time for installation and configuration; you may need to buy a profile separately.
The whole setup takes up space. The Virtual Fly manual specifies separate power and computer connections for the SWITCHO RADIOS.
Plan where the controls and cables will go on the shared desk, and keep voice communication separate from simulator controls.
Separate power, cables and a headset with a microphone also need space and connections.
A dedicated radio panel for direct control of radio and navigation functions.
The IFR-1 combines radio, navigation and other cockpit controls in a single controller with context-sensitive buttons.
The Stream Deck + is a programmable, general-purpose controller that can be set up for a flight simulator using a suitable profile.
SWITCHO RADIOS combines radio functions with other simulated cockpit controls.
The G1000 Audio Panel is designed for a specific G1000 cockpit, not for every radio panel requirement.
Yes. You’ll need a separate audio and microphone setup for conversations. If you use Audio for VATSIM, VATSIM explains how to calibrate your microphone in the client you’re using. To practise without an online conversation, check which simulator functions you need.
No, don’t assume that support is universal. Octavi lists MSFS 2020/2024 and X-Plane for the IFR-1; for SWITCHO RADIOS, Virtual Fly describes a VFHub connection for MSFS, Prepar3D v4–v5 and X-Plane 11/12. According to the listing, the separately sold SideshowFX Stream Deck + profile is designed for MSFS 2024 on Windows. Also check your specific aircraft and any required software.
Measure the available desk space and plan the controls, cables and audio equipment as one setup. Elgato lists the Stream Deck + dimensions as 140 × 138 × 110 mm; the SWITCHO RADIOS manual describes separate power and computer connections. For online voice communication, use a headset with a microphone and configure it in the client you’re using.
According to ACM ConsuWijzer, a standard online consumer purchase generally comes with a statutory cooling-off period of up to 14 days after delivery, subject to legal exceptions. If a product does not perform as you could reasonably expect under normal use, the seller is responsible for providing an appropriate solution, according to ACM ConsuWijzer. If you’re buying from a seller outside the EU, also check the applicable returns policy and any potential extra costs.
A computer simulation operates frequencies within the simulator; that’s different from actually transmitting. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) outlines licensing requirements for radio communications in an aircraft or via an aeronautical ground station. If you want to transmit on aviation frequencies for real, check the relevant rules with the RDI.