Who are these panels for?

Coastal route navigator

You want to change frequencies or operate a GPS interface that matches your aircraft in flight, without repeatedly reaching for the mouse to use the virtual cockpit. Logitech G describes physical COM/NAV controls for its radio panel, while RealSimGear describes a GNS530 interface for compatible avionics.

Instrument reader

You want to keep the coastal scenery on your main screen and read flight information elsewhere. Decide in advance which instruments you want to see at the same time: Logitech G describes switching between views on its Instrument Panel, while Sim Innovations lets you arrange instrument panels on a suitable screen.

Long-session pilot

You want to adjust recurring settings using physical controls. Consider desk space and connections when making your choice; Microsoft Flight Simulator recommends taking the available physical space and the simulation setup you want into account when choosing hardware.

Which option matters most?

Instruments on a separate screen

Choose this if: you want to read flight information without reducing the outside view on your main screen.

Bear in mind: one Logitech G Instrument Panel lets you switch between views; Logitech says you’ll need additional units to display multiple panel views at once. Air Manager requires a suitable screen and a simulator plug-in.

Radio or GPS controls

Choose this if: you mainly change COM/NAV frequencies or want to operate a specific GPS interface that matches your aircraft’s avionics.

Bear in mind: a radio panel isn’t an instrument display; the RealSimGear GNS530 requires, among other things, a plug-in and an HDMI connection, and you’ll need to check the power supply version.

Autopilot and physical controls

Choose this if: you often want to adjust the autopilot, trim or other assigned functions during a long flight.

Bear in mind: an autopilot panel doesn’t replace a radio or GPS; the VKB GNX SEM needs a separate GNX USB Controller if you’re connecting it directly to your PC via USB.

Consideration What to check before buying Who is this important for?
Navigation and radio Check the avionics in the specific aircraft and simulator support. Logitech G describes COM/NAV controls; the RealSimGear GNS530 also requires a plug-in, an HDMI connection and a suitable power supply. If you regularly change frequencies or navigation settings on a coastal route, you’ll want an interface that matches the aircraft you’re simulating. Around 27% of consumers prioritise navigation controls.
Reading instruments Compare the instruments you want to see at once with the number of screens and their layout. Logitech G lists 15 selectable views on the Instrument Panel; one unit can’t show them all at once. If you want to keep the coastal view on your main screen while still reading flight information, the number of views you want to see at the same time is key. Around 27% of consumers prioritise reading instruments.
Autopilot and trim Check which functions work with your aircraft and simulator, and whether a plug-in is needed. Logitech G says the Multipanel requires a plug-in. If you often adjust the autopilot or trim during a long flight, physical controls can move those tasks to the panel. Around 20% of consumers prioritise these controls.
Assigning your own functions Check how to programme the controls and whether the panel connects to your PC on its own. A separate GNX USB Controller is needed to connect the VKB GNX SEM directly via USB. If you want to choose which functions are assigned to physical controls, a fixed radio or instrument layout may not suit you. Around 13% of consumers prioritise customisable controls.
Desk space and connections Measure the available desk space and check the mounting, free USB and HDMI ports, and required plug-ins. Sim Innovations describes Air Manager as working on the same computer or a separate one. If you already have limited desk space or few free connections, you’ll want to know in advance how a screen or physical panel will fit into your setup. Around 13% of consumers make setup and connections their top priority.

Flight sim panel buying pitfalls

  • Treating radio, autopilot and instrument panels as if they were the same product

    These panels have different functions. A radio panel doesn’t provide an extra instrument screen, and an autopilot panel doesn’t replace navigation controls.

    Before you choose, note which task or display you want to move off your main screen, then compare it with the panel’s functions.

  • Assuming all 15 views are visible at once

    Logitech G describes switching between 15 views on the Instrument Panel. That’s not the same as showing all 15 instruments at once.

    Compare the number of instruments you want to see at the same time with the screen layout and any additional units.

  • Assessing the panel module on its own

    A module may need additional connections or software before it works with your setup.

    Check what’s included in the box, which plug-ins are needed and which ports are free. A separate GNX USB Controller is needed to connect the VKB GNX SEM directly via USB; the RealSimGear GNS530 requires an HDMI connection, and you’ll need to check the power adapter.

    Remember to allow for the GNX USB Controller needed for that VKB connection, as well as the HDMI connection and power supply for the GNS530.

Brands to compare

Logitech G

Offers separate instrument, radio, autopilot and switch panels for anyone looking to add a specific cockpit function.

  • Logitech G describes selectable views on the Instrument Panel, COM/NAV controls on the radio panel and physical autopilot controls on the Multipanel.
  • The panels have different functions and aren’t interchangeable. Check software support for your exact setup.

VKB

The GNX SEM is a modular control unit for anyone who wants to customise the layout of switches and functions.

  • VKB describes the GNX SEM as offering programmable controls.
  • A separate GNX USB Controller is needed to connect the module directly to your PC via USB.

VIRPIL Controls

Offers standalone physical control panels for a cockpit you can configure yourself.

  • VIRPIL Controls describes the VPC Control Panel #1 as a standalone USB device that can sit on a desk.
  • It’s a panel with assignable controls, not a separate instrument screen or an aircraft-specific GPS replica.

RealSimGear

Makes dedicated navigation hardware, including the GNS530, for cockpits with matching avionics.

  • RealSimGear lists support for Microsoft Flight Simulator 2020 and 2024 for the GNS530.
  • The GNS530 requires a plug-in and an HDMI connection. The installation guide lists a power adapter with a North American plug; check which version you need.

Sim Innovations

Air Manager is a software-based way to display instrument panels on an existing or separate screen, rather than a complete physical panel.

  • Sim Innovations describes customisable panel layouts and connection to simulators including MSFS 2020/2024 and X-Plane.
  • The manual requires you to install the relevant simulator plug-in. A suitable screen and any physical controls are separate considerations.

Flight sim panels at Joybuy

Related products will be available soon.

Frequently asked questions

Can I see all my flight instruments at once on a single instrument panel?

No, not with a single Logitech G Flight Simulator Instrument Panel: Logitech describes 15 views that you can switch between. Logitech says you’ll need additional units to display multiple panel views at once, so decide in advance which instruments you want to read at the same time.

What do I need to install before Air Manager or a GNS530 will work?

For Air Manager, you need to install the relevant simulator plug-in. For the GNS530, RealSimGear describes its own plug-in and configuration for Microsoft Flight Simulator 2020/2024; the GNS530 also requires an HDMI connection. Check that you have free ports and the right power adapter for your version, too.

What if a panel I bought online is faulty or isn’t suitable?

ACM ConsuWijzer says that online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, although exceptions apply. Your statutory guarantee is separate from any manufacturer’s warranty; if a product is faulty, the seller is responsible for offering an appropriate solution.

Does an electronic flight sim panel need a CE marking in the Netherlands?

A CE marking is required when a product falls under EU rules that require it. Check which rules apply to the specific hardware version; a CE marking doesn’t tell you whether the panel is compatible with your simulator, and it doesn’t automatically apply to software without a device.