Who is this guide for?

Those looking after large map sheets

You want to capture as much of each map as possible, so you compare every original’s dimensions with the scanner’s actual scan area. The University of Antwerp’s scanning guidelines and Plustek Europe’s specifications can help you work out what size you need.

Volunteers handling fragile originals

First, you assess whether the paper, folds and damage mean the map can safely be placed on glass. Choosing a suitable imaging method matters more than speed. The National Archives describes how to assess an item’s physical condition before digitising it.

Coordinators of a shared scanning project

You want volunteers to be able to work consistently with the computers available, follow agreed file conventions and check their scans. The National Archives and VIISAN outline considerations around digitisation and computer compatibility.

What should you look for?

Start by measuring the width and height of your largest map, including any borders you want to keep. Then assess the condition of the originals, as well as the computers and workspace available to your group.

Compact A4 flatbed

Suitable for: individual maps that fit within the maximum size supported by your chosen A4 model, such as 216 × 297 mm for the Canon CanoScan LiDE 300.

Trade-off: a larger map sheet won’t fit in a single full scan. A higher dpi rating won’t increase the scan area.

A3 flatbed

Suitable for: maps that fit within the scan area of the exact model and can safely lie flat on the glass. Plustek lists a maximum scan area of 297 × 431,8 mm for the OpticSlim 1180.

Trade-off: a larger scan area also requires more desk space, and it still won’t be large enough for every historical map.

Professional imaging method

Suitable for: originals that can’t safely be placed on the available glass, don’t fit within the scan area or require precise geometry.

Trade-off: this requires agreed procedures for handling, access and quality control. The National Archives describes a professional book scanner in its reading room, subject to the conditions that apply there.

Concern What to look for when buying Who is this most relevant to?
Will the whole map fit on the scan area? Measure the map’s width and height, then compare both dimensions with the scan area—not just the A3 label. If I want to capture entire maps in a single scan, I compare the whole map with the glass area. Around 31% of consumers say finding the right map size is their main concern when buying.
Can the original be handled safely? Assess the condition of the paper and whether it can lie flat without being forced. If in doubt, agree on a suitable procedure first. If I’m working with fragile, folded or damaged maps, I want to know whether it’s safe to place them on glass. Around 25% of consumers put safe handling first.
Will the details and geometry remain usable? Make a test scan of fine lines and text, and check the file format you intend to use. If you’re georeferencing the map, look out for geometric distortion. If small labels need to remain legible or the map is for georeferencing, I also check the geometry of the scan. Around 19% of consumers prioritise map detail and dimensional accuracy.
What will fit in the workspace? Compare the scanner’s external dimensions with the space available, and check which computers it supports. If our workspace is limited, I want to know whether the scanner and any required equipment will fit in our group’s room. Around 13% of consumers prioritise workspace and available resources.
Can volunteers follow the same process? Check the drivers for the computers in use, test your preferred output format, and agree on file names and quality checks. If several volunteers and computers are involved in the same project, I want the files and checks to be consistent. Around 12% of consumers prioritise having a repeatable process.

Common pitfalls

  • Choosing based only on ‘A3’ or a high dpi rating

    Resolution doesn’t increase the physical scan area. Check the exact model to make sure both the width and height of your map fit on the glass. For example, Plustek Europe lists 297 × 431,8 mm for the OpticSlim 1180.

    Measure your largest map, including any borders you want to keep, and compare both dimensions with the model’s specifications.

  • Treating fragile or creased maps like ordinary loose sheets

    An item’s physical condition can determine whether, and how, it can be safely captured. The National Archives describes assessing the condition of archival material before digitisation.

    Check the map before placing it on glass. If in doubt, decide on a suitable imaging method first.

  • Assuming historical maps are automatically free to share online

    A map’s age, or owning the paper original, doesn’t prove that the map or its scan is free to publish. The Dutch government distinguishes between a private copy for personal use and the distribution or publication of a work.

    Record the rights and any personal data associated with each collection before publishing scans online.

Brands to consider

Canon

The CanoScan LiDE 300 and LiDE 400 are A4 flatbeds for maps that fit within their scan area.

  • Canon lists a maximum document size of 216 × 297 mm for the LiDE 300, and USB-C power for the LiDE 400.
  • The A4 limit still applies, regardless of the stated resolution. These are manufacturer specifications, not independent image-quality test results.

Plustek

The OpticSlim 1180 is an A3 flatbed for individual maps that fit within its stated scan area.

  • Plustek Europe lists a maximum scan area of 297 × 431,8 mm.
  • Compare the map’s dimensions with the scan area, and check your computer and available workspace. The specification doesn’t tell you whether a fragile original can safely lie on the glass.

VIISAN

The VF3120 is an A3 flatbed for larger paper sheets and a computer-based scanning process.

  • VIISAN describes Apple Silicon support through macOS Image Capture and provides separate drivers.
  • These are the manufacturer’s statements about compatibility. Test the combination of computer, driver and scanning process your group will use.

Microtek

The ScanMaker 9800XL Plus is a graphics-focused A3 model with features for workflows that include colour management.

  • The manufacturer’s brochure lists a reflective scan area of 304,8 × 429,26 mm and ICC profile software for PC.
  • Check which software comes with the exact model and what service is available. These specifications don’t prove colour accuracy.

Epson

The Perfection V39II is an A4 flatbed, while the Expression 13000XL offers a larger, graphics-focused model option.

  • Epson describes the V39II as an A4 flatbed. The Dutch product page for the Expression 13000XL lists a scan area of 310 × 437 mm.
  • On that Dutch product page, Epson marks the Expression 13000XL as discontinued. The stated features aren’t an independent test of colour reproduction.

Joybuy products

Related products coming soon.

Frequently asked questions

Is A3 always big enough for a historical map?

No. It depends on the map’s dimensions and the scan area of the exact model. Compare both sides, including any borders you want to keep. Plustek lists a maximum of 297 × 431,8 mm for the OpticSlim 1180. Larger originals require a different imaging method.

How should volunteers get started with fragile maps?

First, assess the item’s physical condition and agree on how it should be handled. The National Archives describes inspecting material before digitisation; this archival practice isn’t a legal requirement for every society. Don’t place a fragile original on glass if it isn’t safe to do so.

Should scans of historical maps be saved as TIFF or PDF?

Choose a file format that suits your group’s needs, and check which formats the exact model and software can save. The Epson Expression 13000XL lists TIFF and PDF/A among its options, but Epson marks this model as discontinued on its Dutch product page. Metamorfoze’s guidelines apply to its own programme and aren’t automatically required for a society’s project.

How can I check whether a scanner works with our computers?

Check that drivers are available for the computers your volunteers actually use, and test your preferred scan output. VIISAN describes support for the VF3120 through macOS Image Capture. Check the exact combination of computer, driver and workflow.

Can we put every scanned historical map online?

No. First, check the rights associated with the specific map and scan. The Dutch government distinguishes between a private copy for personal use and distributing or publishing a protected work. According to the National Archives, its scans may be freely reused only when the image in question has a download button and is marked ‘Public Domain’ or ‘CC0’. This doesn’t apply to maps from other collections.