Who is this scanner advice for?

People responsible for bound catalogues

You regularly scan bound copies and want to capture text close to the spine without carelessly pressing a fragile catalogue flat. Plustek describes the OpticBook 4800 as having a 2 mm book edge; with your own catalogue, check how easily the binding opens.

People scanning large pages

You want to save larger catalogue pages or images in a single scan, so you need to compare the actual scanning area with your originals. Canon specifies a scanning area of 216 × 297 mm for the LiDE 400; VIISAN describes the VF3120 as an A3 flatbed scanner.

Teams sharing one scanning desk

You’re choosing between a compact scanner connected to one computer and a model that several computers can use directly. Epson lists networking and Wi-Fi for the WorkForce DS-1760WN; check the connections on the exact model you’re considering.

What should you look for when choosing?

First, measure the largest page or spread you want to scan in one go. Then decide what you need in terms of the binding, the shared workspace and checking your files.

Compact A4 flatbed with USB

Best for: individual pages up to A4 and one dedicated scanning computer.

Trade-off: a double-page spread larger than the scanning area won’t necessarily fit in a single scan.

A4 flatbed designed for books

Best for: bound material where text close to the spine matters.

Trade-off: the book edge doesn’t increase the scanning area beyond A4 or guarantee that every binding can be laid flat safely.

A3 flatbed

Best for: originals that won’t fit on A4 but are within the scanning area of your chosen model.

Trade-off: A3 doesn’t automatically mean that every open catalogue will fit or that you can press its spine against the glass.

Network flatbed

Best for: a workspace where several users need to scan directly from different computers.

Trade-off: a document feeder is intended for loose sheets and doesn’t replace the glass bed when scanning an intact bound book.

What to consider What to look for Who should pay particular attention?
Binding and spine Check how far the catalogue opens and whether text near the spine is legible in a test scan. I don’t want to press a fragile binding flat unnecessarily, and I need to assess text near the spine. Around 33% of consumers prioritise preserving the binding and keeping text legible.
Page or spread size Measure the largest area you want to capture in one scan and compare its width and height with the scanning area of the exact model. I want to capture a large page or open spread in one go and find out in advance whether it will fit on the glass. Around 27% of consumers prioritise the scanning size they need.
Space and computer access Decide whether one scanning computer is enough or whether different computers need direct access. I share a scanning area with colleagues and don’t want to have to transfer files via a dedicated computer if direct access is needed. Around 20% of consumers prioritise the layout and access arrangements at a shared desk.
Searchability and image checking Check which OCR and export software is available, then assess a test scan for text, images and completeness. I want to be able to find catalogue text and check images without assuming that OCR has processed every page correctly. Around 20% of consumers prioritise searchability and checking.

Pitfalls to avoid

  • An A4 catalogue doesn’t mean the open catalogue will fit on A4

    A4 describes the scanning area, not necessarily two pages side by side. A spread that’s too large may need to be scanned in sections and stitched together.

    Measure the largest area you want to save in one scan beforehand.

  • A document feeder isn’t the answer for an intact book

    According to Epson, the WorkForce DS-1760WN has both a glass bed and a feeder for loose documents. The feeder doesn’t turn a bound catalogue into loose sheets.

    For bound catalogues, assess the glass bed and how the binding is handled separately from any feeder functions.

  • OCR or a high dpi figure doesn’t prove that a scan is complete

    Searchable files and stated resolutions don’t confirm that every page has been included or reproduced properly. You may need to check the results afterwards.

    Check a test scan for the inner margin, images and text; if you’re scanning a series, check the page order too.

Brands to consider

Canon

The CanoScan LiDE 400 is a compact A4 option for individual pages, connected to a computer via USB.

  • Canon specifies a scanning area of 216 × 297 mm, USB power and vertical placement.
  • According to the Dutch Canon Store, the Z-lid can accommodate items up to 21 mm thick.
  • That lid clearance doesn’t prove that every bound catalogue can be laid flat safely or that a large spread will fit on the glass.

Epson

The Perfection V39II is designed for compact A4 tasks; the WorkForce DS-1760WN is a separate range for a shared, network-connected workspace.

  • Epson lists a built-in stand and USB power for the V39II.
  • For the DS-1760WN, Epson lists networking, Wi-Fi and a glass bed.
  • Check the exact model: the network features mentioned aren’t automatically available on the V39II. Epson lists the V600 Photo as discontinued.

Plustek

The OpticBook 4800 is an A4 flatbed that Plustek positions for bound books and catalogues.

  • Plustek lists a 2 mm book edge and support for searchable PDFs.
  • These are manufacturer specifications and claims, not a guarantee for every binding or scan. The stated maximum size is A4.

VIISAN

The VF3120 offers an A3 flatbed option for originals larger than the scanning area of an A4 model.

  • VIISAN lists books and larger images as possible uses and states that it supports a macOS ICA driver for Apple Silicon.
  • Check that the driver is compatible with your workstation and that the usable glass dimensions suit your catalogue.

Joybuy products

This product selection is focused on scanning bound catalogues at a shared desk with an A4 flatbed scanner.

Epson WorkForce DS-1660W A4 flatbed scanner

Epson WorkForce DS-1660W, A4 flatbed scanner, 1200 × 1200 dpi, black and white

The product description mentions scanning books and bound documents; make a test scan to check whether the inner margin of your catalogue is captured properly.

A4 size; 1200 × 1200 dpi; Wi-Fi and USB 3.0 according to the product description. Measure the page or spread you want to scan, as it won’t necessarily fit within the scanning area.

View at Joybuy

Frequently asked questions

Can I scan an entire open catalogue with an A4 flatbed scanner?

Only if the area you want to capture in one scan fits within the scanning area of that exact model. Canon specifies a maximum of 216 × 297 mm for the LiDE 400, so measure the open catalogue, not just one page.

How can I organise scanning for several users?

First, decide whether everyone will use the same scanning computer. If different computers need direct access, a model with a confirmed network function is a suitable option; Epson lists this feature for the WorkForce DS-1760WN.

How do I keep the glass bed and scanner clean?

Follow the manual for the model you’ve bought. Epson advises disconnecting its products from the power supply before cleaning, not spraying directly onto the device and keeping abrasive products and moisture away from the edge of the glass bed. This is manufacturer advice, not a universal rule for all scanners.

Can I share scans of exhibition catalogues with my team or online?

Don’t assume that a permitted private copy can also be shared. The Rijksoverheid states that a private copy for personal use must not be distributed or made publicly available. For team use or publication, check the rights for the specific catalogue and intended use.

What if catalogues or scan files contain personal data?

If an organisation processes personal data, the GDPR requires appropriate security measures based on the risks, according to the Dutch Data Protection Authority. If so, restrict unauthorised access and check files before sharing or publishing them. This applies when personal data is being processed.