Studio using both 35mm and 120 film
Check that both formats are supported by the scanning area and the supplied or compatible holders. Plustek states that the OpticFilm 120 supports 35mm and 120/220 film, from 6 × 4.5 to 6 × 12 cm.
Start with the film formats: a 35mm scanner won’t replace one that also supports 120 film and the corresponding holder, as Plustek specifies for the OpticFilm 120. If you have lots of 35mm strips to scan, motorised feeding can be practical; reflecta states that the RPS 10S offers automatic feeding for 3 to 40 frames. For traditional silver-based black-and-white film, don’t choose a scanner solely for its infrared dust correction: this method isn’t suitable, according to LaserSoft Imaging.
Check that both formats are supported by the scanning area and the supplied or compatible holders. Plustek states that the OpticFilm 120 supports 35mm and 120/220 film, from 6 × 4.5 to 6 × 12 cm.
If you’re processing a series of frames, compare automatic feeding with scanning by hand. reflecta states that the RPS 10S offers automatic feeding for 3 to 40 frames on 35mm film strips.
If you want to assess tone and dust correction yourself, take the film emulsion and the chosen correction method into account. LaserSoft Imaging describes infrared correction as unsuitable for traditional silver-based black-and-white film.
First, list all the film formats used in the studio. Then work out how many consecutive scans you need, before choosing the level of software-based retouching you want.
| What to consider | What should you look for when buying? | Who should prioritise this? |
|---|---|---|
| Supported film formats | List your 35mm, 120 and any 110 or 126 film. Check both the holders and the scanning area for the exact model. | If we use both 35mm and 120 film in the studio, I want to make sure neither format is left out of the workflow. Around 31% of consumers prioritise support for multiple film formats. |
| Feeding when scanning lots of frames | Check which strip lengths and holders are compatible, and what steps are needed between consecutive scans. | When scanning lots of 35mm strips, I want to reduce the manual work per frame and make it easy for users to hand over to each other. Around 31% of consumers give top priority to feeding when scanning repeatedly. |
| Black-and-white retouching | Check which dust correction method is suitable for your film emulsion, and review a test scan for detail before processing a whole batch. | If I want to check tone and dust correction carefully, the chosen method needs to suit traditional black-and-white film. Around 23% of consumers prioritise retouching black-and-white files. |
| Operation and storage | Check the screen and file output, the storage media required, and whether the chosen workflow needs scanner software on a computer. | If different studio members want to scan without having to install software each time, ease of use is important. Around 15% of consumers say independent, accessible scanning is their main consideration. |
Infrared correction doesn’t work in the same way with traditional silver-based black-and-white emulsion as it does with compatible film.
Check which emulsion the studio uses, and compare suitable software correction with an unedited scan.
Allow time to clean negatives and carry out any separate retouching that may be needed.
A model with a scanning area for 35mm film won’t replace a scanner that can handle 120 film as a full frame.
Compare the studio’s film formats with the scanning area and holders for the exact model.
A higher output resolution doesn’t automatically mean that more detail has been captured from the negative. For the 7-inch KODAK Slide N SCAN Max, the retailer distinguishes between a 13 MP sensor and an option for 22 MP output.
Compare test files and workflows for your intended use, and don’t treat output resolution as proof of increased optical detail.
The standalone KODAK model mentioned requires an SD card, which the retailer says isn’t included. For computer-connected models, you’ll also need to consider software and computer compatibility.
Check what’s in the box, storage requirements, licence terms and compatibility with the computer used by the studio.
Depending on the model you choose, the studio may also need a suitable SD card or software licence.
A useful option to compare for studios looking for a dedicated film-scanning setup, with models designed for different formats.
The RPS 10S is a computer-connected option to compare for studios processing lots of 35mm film strips.
The European 7-inch Slide N SCAN Max is a standalone option for 135, 110 and 126 negatives, among others.
The Perfection V600 Photo and V850 Pro are examples of flatbed scanners with holders for 35mm and 120 film.
No, not as a general solution: the emulsion in traditional silver-based black-and-white film interferes with the infrared method. Consider cleaning and any software-based correction separately, and check that the correction preserves detail in the image.
For each user, note which film holder, computer, software licence and output settings are part of the workflow, and where scans are stored. Check the requirements for the exact device and studio computer; reflecta, for example, publishes separate Windows and macOS requirements for the RPS 10S.
Keep negatives and holders clean, and review a test scan before processing a whole batch. For traditional black-and-white film, infrared correction is no substitute for checking for dust.
For a consumer purchase, ACM ConsuWijzer says the seller is responsible for resolving the issue if the product doesn’t perform as you could reasonably expect under normal use. Don’t assume this automatically applies to a business purchase on behalf of the studio: decide in advance who the contracting party is and read the terms that apply to that purchase.
According to the Dutch government, making a copy for personal use doesn’t automatically give you permission to distribute or publish copyright-protected photos. Privacy rules may also apply if people can be recognised; the Dutch Data Protection Authority points out that personal data can’t simply be published online without permission. Consider the rights and intended use of each photo.