Which approach is right for you?

Studio with mixed-format negatives

If you have both 35mm and medium-format film, check the image size for each roll and make sure the scanner has a suitable holder. Plustek says the OpticFilm 120 Pro supports 35mm and 120/220 film up to 6 × 12 cm.

Portrait photographer with a 35mm archive

If your archive consists only of 35mm film and you have time to assess images individually, you could consider a detail-focused 35mm scanner. Plustek lists a stated resolution of 7200 dpi for the OpticFilm 8200i SE.

Studio with lots of film strips

If you have lots of compatible 35mm strips, automatic feeding may be worth considering. Remember to allow time to check and save the scans too. reflecta says the RPS 10S automatically feeds strips containing 3 to 40 frames.

What should you look for when choosing?

Start by taking stock of your film formats and holders. Then decide whether you mainly want to create final files or make a quick initial selection.

What to consider What to look for Who is this important for?
Film formats Check which film and image sizes are supported, and which holders are included with the exact model. If I have a mix of 35mm and medium-format film, I want to know which originals will fit the same setup. Around 33% of consumers prioritise support for all the formats they have.
Detail and files Check which output formats are available and assess sample scans of your own film; a stated dpi figure does not guarantee visible detail. If I want to assess or edit portraits later, the usable scan result matters more than a high stated resolution alone. Around 27% of consumers prioritise detail for 35mm film.
Strip feeding Check whether the scanner can handle your strip lengths and allow time for checking and any necessary corrections. If I have lots of compatible 35mm strips, I want to process as much material as possible before moving day. Around 20% of consumers prioritise batch feeding.
Quick cataloguing Check whether the scanner has a screen and SD card storage, which film adapters are compatible and whether an SD card is included. If I want to view and sort the portraits first, so I can decide which deserve a more careful scan, a basic setup is appealing. Around 20% of consumers make quick cataloguing their top priority.

Common pitfalls

  • Assuming a high dpi figure guarantees detail

    The Library of Congress points out that resolution is not the only measure when digitising. The result also depends on the original and how you plan to use it.

    Make test scans of your own film using the output settings you need, then review the files before processing the whole collection.

    Allow time for test scans and reviewing the results.

  • Choosing a 35mm scanner for an archive that includes 120 film

    A 35mm model will not automatically handle medium-format film too. The Plustek OpticFilm 8200i SE is designed for 35mm, while the OpticFilm 120 Pro also lists support for 120/220 film.

    Make a note of your film and image sizes in advance, then check which holders and formats are supported by the exact model.

  • Treating a quick SD scan as a final archive scan

    The Consumentenbond distinguishes between basic scanners for quick processing and film scanners for when image quality is the priority. A quick first scan may not be the right final version for every portrait.

    You could use a quick first pass to select images, then assess important portraits separately at the output quality you need.

  • Assuming the Epson V600 is readily available new

    Epson Netherlands lists the Perfection V600 Photo as discontinued. Previous product information therefore does not confirm that the model is available as a new product.

    If you already have one or are considering buying one second-hand, check its condition, the film holders supplied and whether it is compatible with your computer.

    Finding a complete example with working holders and software may take extra preparation time.

Brands and models to consider

Plustek

The OpticFilm models mentioned here cater for different film formats: the 8200i SE is designed for 35mm, while the 120 Pro also supports 120/220 film.

  • Plustek lists an infrared channel and a stated resolution of 7200 dpi for 35mm on the 8200i SE.
  • For the 120 Pro, Plustek lists support for 120/220 film up to 6 × 12 cm and TIFF output.
  • The 8200i SE is not suitable for an archive that includes 120 film. Specifications alone do not guarantee a particular scan result.

reflecta

The RPS 10S is worth considering if you want to process lots of compatible 35mm strips before the move.

  • reflecta lists automatic feeding for strips containing 3 to 40 frames, plus a separate feed for mounted slides.
  • The maximum stated scan area is 24,3 × 36,5 mm, so this is not an option for medium-format film. The feeding specification alone says nothing about the final image quality.

KODAK Photo Plus

The 5-inch SLIDE N SCAN offers a simple way to view and save supported film without computer software.

  • The product information lists a screen, adapters and SD storage for 135, 110 and 126 film.
  • An SD card is required but not included. According to the Consumentenbond, quick processing with a basic scanner generally means lower image quality than with a good film scanner; this is not an independent test of this specific model.

Epson

The Perfection V600 Photo is worth considering if you are assessing an existing flatbed scanner for film and printed photos.

  • Epson Netherlands specifies holders for 35mm and 120/220 film up to a maximum of 6 × 22 cm.
  • Epson Netherlands lists the V600 as discontinued; historical product specifications do not confirm current availability as a new product.

Joybuy products

Related products coming soon.

Frequently asked questions

What should I check before putting old portrait film in a scanner?

Sort the film by format, image size and packaging, then check that you have the right holder. Where possible, handle originals by the edges and work on a clean, dry surface; the Library of Congress advises careful handling of photographic originals.

Should I use infrared dust correction for every type of film?

No. First check the film type and make a test scan. LaserSoft Imaging describes infrared correction separately from software correction that is also intended for black-and-white film. Do not assume the same setting is suitable for all old portrait negatives.

How should I store scans during and after the move?

Check the files and keep copies on at least two different storage media in separate locations; this is the Library of Congress’s archiving advice. For identifiable client portraits, restrict access in line with the privacy risks.

When might it be practical to outsource the scanning?

For a large or valuable collection, compare the time it would take you to do the work yourself with a quote for the job. Ask which resolution, file formats and corrections are included; the right approach also depends on the time available and the image quality you want.

Can a Dutch studio keep or publish identifiable old client portraits indefinitely?

No. Treat identifiable portraits processed for business purposes as personal data. According to the Dutch Data Protection Authority, processing for business purposes requires an appropriate legal basis under the GDPR, and the exception for purely personal or household use does not apply. The GDPR does not set a general fixed retention period; the studio must assess an appropriate purpose, retention period and security measures. Having a legal basis to keep the portraits does not automatically mean they can be published for any purpose.