Start with the negative format and the file you’ll need after the review. For 35mm scans you can carefully edit, a dedicated film scanner is a good fit, while 120 film requires a scanner that explicitly supports that format. Standalone JPEG storage may be enough for quickly making an initial selection, but allow time for loading, reviewing and any dust or colour correction too. Consumentenbond points out that the amount of material, the quality you want and the time available all help determine your choice.
Who is this choice relevant to?
35mm photographer who takes care with selection
You want to assess landscape details and tonal differences, then edit selected images further. Consumentenbond identifies quality as a factor in your choice, while Plustek describes the OpticFilm 8200i SE as a model for 35mm negatives.
Photographer with 35mm and 120 negatives
You have several film formats and want to check whether the scanner and holders can also handle your medium-format images. Plustek lists 120 support for the OpticFilm 120 Pro; Epson lists support for 35mm and 120/220 film for the V850 Pro.
Photographer with a review coming up
You want to make an initial selection from plenty of images before the review, and weigh fast throughput and straightforward output against the time needed for checking and editing. Consumentenbond lists time and the amount of material as factors to consider; reflecta describes automatic feed for the RPS 10S.
What should you look for when buying?
Start with the film format. Then decide whether you need files you can edit and how much time you have for the complete process.
| What to consider |
What should you check? |
Who is this most important for? |
| Scan detail and editing |
Compare optical or measured resolution with interpolated output, and check that your preferred file format is available. |
If I want to assess or edit landscape details later, I’ll prioritise detail and file options. Around 29% of consumers focus on detail and editing. |
| Negative format |
Compare the frame dimensions with the formats and holders explicitly supported by the exact model. |
If I have both 35mm and 120 negatives, I want one suitable scanning setup to handle them all. Around 29% of consumers place most importance on support for their own film format. |
| Processing time |
Count the frames and check the feed method; allow time to review and correct the images. |
With lots of frames and a review coming up, I want to make my initial selection in time, even if further editing is still needed afterwards. This is the main concern for around 24% of consumers. |
| Simple output |
Check whether the scanner produces JPEG or also TIFF/PSD, and whether you need a computer or SD card. |
For an initial selection, I want to keep the equipment and file steps simple, even if that gives me less scope for editing. Around 18% of consumers prioritise simple output. |
Common pitfalls
-
Buying a 35mm model without checking your negatives first
Support for 35mm doesn’t automatically mean a scanner can handle a full medium-format frame.
Make a note of your film formats and frame dimensions, then compare them with the specifications and holders for the exact model.
-
Assuming a high megapixel count means proven scan detail
According to reflecta, the 22MP setting on the reflecta x66-Scan is interpolated from a 14MP sensor; that isn’t the same as independently verified resolved detail.
Check how the resolution is achieved and whether the result suits what you intend to use your scans for.
-
Allowing for the stated scan time only
Consumentenbond points out that digitising your own images takes time for tasks beyond scanning, such as checking and saving files.
Process a small, representative batch first, then work out how long the remaining selection will take.
-
Assuming a scanner is ready to use without checking what you need
Epson Netherlands marks the Epson Perfection V850 Pro as discontinued. The Kodak Slide N Scan requires an SD card, which Kodak Photo Plus says is not included.
Check the condition, included holders, software and storage requirements for the specific item on offer.
You’ll need to provide your own SD card for the Kodak Slide N Scan.
Relevant brands to consider
Plustek
The OpticFilm 8200i SE is designed for 35mm negatives; the OpticFilm 120 Pro is intended for a workflow that includes both 35mm and 120 film.
- For the OpticFilm 120 Pro, Plustek lists 35mm and 120 film from 6 × 4.5 to 6 × 12 cm, with JPEG, TIFF and PSD output.
- The OpticFilm 8200i SE is a 35mm model. According to SilverFast, the iSRD infrared method cannot be used with traditional silver-based black-and-white film.
reflecta
The RPS 10S offers a feed-through option for 35mm film; the x66-Scan is designed for standalone scanning.
- reflecta lists automatic feeding of 3 to 40 images for the RPS 10S. The x66-Scan works without a computer and, according to the manufacturer, also supports certain 120 formats.
- According to reflecta, the x66-Scan’s 22MP setting is interpolated from a 14MP sensor; the scanner saves directly to an SD card as JPEG.
Epson
The Perfection V850 Pro is a flatbed option for formats including 35mm and 120/220 film.
- Epson lists support for 35mm and 120/220 film.
- Epson Netherlands marks the V850 Pro as discontinued and no longer available through its product listing. If you’re considering one, check its condition, holders and software.
Kodak Photo Plus
The Slide N Scan, with its 7-inch screen, is designed for standalone selection of the 135, 110 and 126 formats listed by Kodak.
- Kodak Photo Plus lists direct saving to an SD card.
- An SD card is required, but Kodak Photo Plus says it is not included. The product listing does not mention 120 support.
VALOI
The easy35 is a camera-scanning setup for anyone who already has a suitable digital camera and macro lens.
- VALOI describes a built-in light source and interchangeable holders for 35mm and smaller formats.
- The camera, macro lens and careful setup remain part of the workflow; the easy35 is not described as a 120 scanner.
Products at Joybuy
Related products coming soon.
Frequently asked questions
Can a 35mm film scanner also scan my 120 landscape negatives?
Not simply because it’s described as a ‘film scanner’. Plustek lists support for 120 film from 6 × 4.5 to 6 × 12 cm for the OpticFilm 120 Pro, while the OpticFilm 8200i SE is designed for 35mm negatives. Also check that the holders supplied with the specific item suit your film.
How should I handle delicate negatives before scanning?
Handle film carefully and, if you need to touch it directly, wear clean, well-fitting nitrile gloves; the Library of Congress recommends this for film. Also allow time to check the scans for dust and other imperfections.
Does infrared correction work with traditional black-and-white film?
Not with traditional silver-based black-and-white film using the iSRD method. SilverFast explains that silver halides reflect infrared light, so this infrared method cannot be used with that film. Ask about a different correction method for this material.
What should I arrange in advance for a single portfolio project?
Compare buying with borrowing, hiring or having the film digitised, and if you’re using a service, ask in advance about file formats and corrections. The Kodak Slide N Scan requires an SD card, which Kodak Photo Plus says is not included. Also set aside time for loading, reviewing and saving files.