What should you look for?
First, check that the scan area and holders are suitable for your film. Then compare the loading process, the file output you need and the components you already own.
| What to consider |
What to look for when buying |
Who is this important for? |
| Film format and frame size |
List your 35mm, 120 film and less common aspect ratios. Compare the scan area and available holders with the full image you want to preserve. |
If I have different formats or wide landscape frames, I want to make sure the whole negative will fit. Around 25% of consumers prioritise format compatibility. |
| Feeding and loading |
Count the frames and strips in your project. Distinguish between film transport and software that scans frames already in place one after another. |
For a large project, I want to reload the film less often and know exactly which steps are automatic. Around 25% of consumers prioritise processing large numbers of frames. |
| Editable image detail |
Compare the output and correction options with your film type, for example by making a test scan. Don’t assume infrared dust correction is suitable for traditional silver-based black-and-white film. |
If I want to review or edit landscape details later, I need output that suits my workflow. Around 20% of consumers prioritise editable detail. |
| Project folders and preservation |
Test the output folder and file names in advance using a small batch. Decide how you’ll link scans to a roll or project and where you’ll keep backup copies. |
I want to be able to link scans to the right roll and frame later, without relying on a single storage location. Around 20% of consumers prioritise file organisation and preservation. |
| Complete setup |
Factor in the holders, software and storage you’ll need; a camera setup also requires suitable camera equipment. Check which components you already own. |
If I choose one option, I want to weigh the components I’ll need against what I already have. Around 10% of consumers prioritise having a complete setup. |
Products on Joybuy
Related products will be available soon.
Frequently asked questions
Can I use a 35mm scanner for 120 film or wide panoramas?
Not without checking the dimensions and holder for each model. reflecta lists a scan area of up to 24.3 × 36.5 mm for the RPS 10S, while Epson separately specifies support for 120/220 film on the V850 Pro.
How can I keep large numbers of scans organised by project?
Set up an output folder and easy-to-recognise file names in advance, then test them with a small batch. The VueScan manual explains how to choose a folder and set up automatic numbering; check that your chosen software version works with your scanner. The Library of Congress recommends keeping copies on at least two different storage media and in separate locations.
Does infrared dust removal work with traditional black-and-white film?
Not as a general solution: according to SilverFast, infrared light can’t pass through the silver-based emulsion of traditional black-and-white film. So check your film type and, if needed, choose another correction method.
What else should I consider alongside the scanner?
Check which holders, software and storage your workflow requires. For example, the KODAK SLIDE N SCAN needs an SD card, while a VALOI easy120 setup requires a suitable camera and macro lens.
Can I publish scans of someone else’s photographs online?
Digitising a photograph doesn’t automatically give you the right to publish it. According to the Dutch Government, you may make a private copy for your own use under certain conditions, but you can’t share or publish it without permission if it is protected by copyright.