Who is this choice relevant to?

Scanners for mixed film formats

You have landscape negatives in both 35mm and 120 film and want to choose a scanner that supports both. Plustek and reflecta list different film formats and limits for each model.

35mm scanners for editing

You want to scan 35mm landscape negatives and then work on the files on a computer. A computer-dependent model suits this workflow, provided the shared workstation is available.

Shared workstation users

You’re weighing up whether everyone should scan using the same computer or whether a standalone scanner would keep it free. The terms of the software you choose may also depend on the users and computers in your setup.

What should you look for?

Start with the film formats in your archive. Then compare your preferred file workflow with the time and access available on the shared workstation.

What to consider What should you check? Who is this important for?
Film format support Check the film type and image dimensions. Plustek specifies support for 120 film up to 6 × 12 cm for the OpticFilm 120 Pro; reflecta lists support for formats up to 6 × 9 cm for the x66-Scan. If I have both 35mm and 120 film, I want to make sure none of my archive falls outside the scanner’s range. Around 33% of consumers prioritise format support.
Detail and scan files Compare the stated sensor or measured resolution with interpolated output, and check that the exact model supports the file type you want. Plustek lists JPEG, TIFF and PSD for the OpticFilm 120 Pro; reflecta specifies a 14 MP sensor and 22 MP interpolated output for the x66-Scan. If I want to edit landscape images later, I need a file type that suits my workflow. Around 27% of consumers prioritise detail and files they can edit.
Shared computer Check which users and computers will use the scanner and software. Hamrick Software describes VueScan terms that depend on personal or organisational use; LaserSoft Imaging states that SilverFast 9 can be used on one computer at a time per licence. If several people need the same computer, I want to know whether the scanning workflow will tie up the workstation. Around 27% of consumers prioritise keeping the shared workstation available.
Throughput and manual handling Count the strips and frames, and check whether automatic feeding applies to your film format. Pacific Image specifies automatic feeding of up to 40 frames of 35mm film for the PrimeFilm XA Plus; reflecta lists automatic feeding of 3 to 40 35mm frames for the RPS 10S. When I have a long run of 35mm negatives, I want to spend less time feeding strips by hand. Around 13% of consumers prioritise throughput and less manual handling.

Common pitfalls

  • Choosing a 35mm scanner for an archive containing 120 negatives

    The Plustek OpticFilm 8200i SE is designed for 35mm. The OpticFilm 120 Pro and reflecta x66-Scan each support their own 120 film formats and limits.

    Check the film type and dimensions of your negatives against the specifications for the exact model.

  • Mistaking interpolated megapixels for captured sensor detail

    reflecta specifies a 14 MP sensor and 22 MP output through interpolation for the x66-Scan. That higher output figure is not the same as the stated sensor resolution.

    Compare sensor and measured specifications with any interpolated output, and don’t treat the highest pixel count as proof of detail on its own.

  • Assuming scanner software can be used without limits on shared computers

    The terms for VueScan and SilverFast 9 vary depending on the type of use and the number of computers.

    Check the terms of your chosen software for the users and computers in your setup. Hamrick Software and LaserSoft Imaging set out their licensing rules separately.

  • Mistaking a discontinued Epson page for a current new product listing

    Epson Netherlands marks the V600 Photo and V850 Pro models reviewed as discontinued and no longer available.

    Use the model specifications as a reference, and check that a second-hand unit works and includes the film holders.

Brands to compare

Plustek

According to Plustek Netherlands, the OpticFilm models reviewed offer two different format options.

  • The OpticFilm 8200i SE is designed for 35mm; the OpticFilm 120 Pro supports 35mm and 120 film up to 6 × 12 cm.
  • Plustek lists JPEG, TIFF and PSD output for the OpticFilm 120 Pro.
  • Both models reviewed require a computer; the 8200i SE is not suitable for 120 film.

reflecta

According to reflecta, the models reviewed range from standalone scanning with the x66-Scan to automatic 35mm feeding with the RPS 10S.

  • According to reflecta, the x66-Scan saves JPEG files directly to an SD card and supports certain 120 film formats up to 6 × 9 cm.
  • The RPS 10S supports automatic feeding of 3 to 40 35mm frames.
  • According to reflecta, the x66-Scan has a 14 MP sensor; its stated 22 MP output is interpolated. The RPS 10S is not a 120 film scanner.

Pacific Image

According to Pacific Image Electronics, the PrimeFilm XA Plus model reviewed is designed to scan 35mm film rolls and strips via a computer.

  • The manufacturer lists automatic feeding of up to 40 frames, infrared dust correction and DNG support.
  • This model information describes the XA Plus and does not automatically apply to other products from the brand.

Epson

According to Epson Netherlands, the V600 Photo and V850 Pro models reviewed are film flatbed scanners for formats including 35mm and 120 film.

  • According to Epson, the V850 Pro also supports formats including 5 × 4 inch film.
  • Epson Netherlands marks both models as discontinued and no longer available. Their specifications don’t make a second-hand unit a new product for sale.

Kodak Photo Plus

According to Kodak Photo Plus, the Slide N Scan model reviewed is designed for 135, 110 and 126 film.

  • The specifications list a 14 MP sensor and interpolated output of 22 MP.
  • The film formats listed do not include 120 medium format film.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a separate licence for scanner software on a shared computer?

That depends on the software and how you use the computers. Hamrick Software distinguishes between personally managed computers and computers belonging to organisations for VueScan. LaserSoft Imaging states that one SilverFast 9 licence allows use on one computer at a time; check the terms for your setup. These are supplier terms, not Dutch statutory licensing rules.

How can I reduce dust before scanning a negative?

Carefully remove loose dust before scanning and follow the film and software manufacturers’ instructions. Hamrick Software recommends using a blower bulb and warns that propellant from an aerosol can may come into contact with the film emulsion. Infrared correction is no substitute for preparing the film carefully.

What warranty am I entitled to in the Netherlands for a film scanner?

When you buy as a consumer, the product must meet what you can reasonably expect from it; according to the Dutch Government, there is no fixed statutory warranty period in the Netherlands. What you can expect depends, among other things, on the product information and whether the device is new or second-hand. Different terms may apply to business purchases.

Can I return a scanner bought online within 14 days?

When you buy from a business at a distance, you generally have a 14-day cooling-off period, including for second-hand products. The Dutch Government distinguishes between buying from a business and buying from a private individual; also check whether an exception applies.

Does the GDPR apply to landscape negatives on a shared workstation?

Not automatically just because you use a scanner or shared workstation. According to the Dutch Data Protection Authority, images in which people can be identified count as personal data. The household exemption described applies to purely personal use; it does not apply to business use. So consider what appears in the scans and how you use them, especially before an organisation publishes images of identifiable people.