Who is this choice relevant to?

Curator of a mixed family archive

You have negatives whose format you need to identify first, and want to keep the physical originals. The Consumentenbond and the US National Archives offer practical guidance on digitising and preserving family archives.

Editor of 35mm family photos

You want to review scans on a computer and keep local files for later colour correction or a new export. Plustek, reflecta and the National Archives of the Netherlands describe relevant scanning and file options.

Quick digitiser

You want to make memories accessible with minimal setup and may be happy with a local JPEG file. reflecta describes the standalone x66-Scan, which saves files to an SD card.

What should you look for in a film scanner?

First, note which film formats are in your archive. Then decide whether you need an editable local source file or whether scanning directly to an SD card is enough.

What to consider What to look for Who is this important to?
Film format Check the scanning range and holder for every format in your archive, such as 35mm, 110, 126 or medium format. If I have different formats, I want to know in advance which originals I can scan with the same device. Around 36% of consumers give format coverage the highest priority.
Local source file Check which file formats the scanner and its software can actually save. If you want to edit scans again later, decide which source file you want to keep locally and whether the software can provide it. Around 29% of consumers prioritise the type of source file.
Loading and scanning time Check how many images fit in the holder at a time and whether strips are fed through automatically. The time per image is not the total time needed to scan an archive. With a large collection, I want to know how much time loading, checking and organising will take. Around 21% of consumers give the time required to process their collection the highest priority.
Standalone scanning Check whether the model works without a computer and whether the necessary storage and holders are available. If I’d rather not use a computer for scanning, a standalone setup is a deciding factor for me. Around 14% of consumers choose ease of use as their main consideration.

Avoiding common buying mistakes

  • Mistaking a high megapixel count for captured sensor detail

    For the reflecta x66-Scan and the KODAK Slide N Scan, the manufacturers state that they have a 14MP sensor and offer 22MP output through interpolation. The higher output figure is not the same as the sensor resolution.

    Compare the sensor resolution, interpolated output and file format separately. Don’t judge image quality by the highest megapixel count alone.

  • Assuming every scanner with ‘photo’ in its name can scan negatives

    A standard flatbed scanner isn’t automatically suitable for film. You need a suitable transparency unit and a holder that fits the format.

    For the exact model, check both its film-scanning function and the supported formats and holders. Otherwise, you may still need another device or a digitising service to handle part of your archive.

  • Treating a scan as a replacement for the negative and a backup

    Digital files can be lost. The US National Archives recommends keeping the originals and making copies of digital files on separate storage media.

    Store your negatives carefully, keep an unedited digital version separately, and make backups on different storage media, including a copy at another location.

  • Judging a discontinued model by an old product page

    Epson Netherlands lists the Perfection V600 Photo as discontinued and no longer available. Its product specifications therefore don’t describe a current offering.

    If you’re considering remaining stock or a second-hand purchase, check which holders and software are included and whether the scanner is compatible with your computer.

Relevant brands and scanner ranges

Plustek

The OpticFilm 8300i SE is a computer-connected option for 35mm negatives and slides.

  • Plustek specifies a hardware resolution of 7,200 dpi, 24/48-bit colour output, infrared and the included SilverFast SE Plus 9.
  • The stated scanning area is for 35mm, and a computer is required. Specifications alone don’t establish image quality.

reflecta

The RPS 10S connects to a computer, while the x66-Scan works independently and saves files to an SD card.

  • According to reflecta, the RPS 10S supports DNG-RAW output and automatic strip feeding. The manufacturer says the x66-Scan supports 35mm and certain 120 and 127 formats, among others.
  • The x66-Scan saves JPEG files. reflecta specifies a 14MP sensor and 22MP interpolated output; this doesn’t confirm RAW output.

KODAK Photo Plus

The Slide N Scan is a standalone scanner for the film types specified by the manufacturer.

  • KODAK Photo Plus lists holders for 135, 110 and 126 film, and a 14MP CMOS sensor.
  • The stated 22MP is interpolated output. The model hasn’t been shown to support 120 film or to scan to a lossless RAW or TIFF source file.

Epson

The Perfection V600 Photo is a flatbed scanner with a transparency unit, designed for film, prints and documents.

  • Epson specifies holders for 35mm and 120/220 film, as well as TIFF output.
  • Epson Netherlands lists the V600 as discontinued and no longer available. If you’re considering remaining stock or a second-hand purchase, check its condition and which parts are included.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I avoid buying the wrong scanner for my negatives?

First, identify whether your film is 35mm, 110, 126 or medium format, then check the specifications and holder for the exact model. The Plustek OpticFilm 8300i SE, for example, is specified for 35mm; that doesn’t automatically make it suitable for 120 film.

What should I do with the files and original negatives after scanning?

Transfer files from an SD card to your own storage, give them recognisable names and keep the negatives. The US National Archives recommends keeping three copies of digital files on two types of storage media, with one copy at another location.

Is JPEG enough if I want to keep my scans locally?

JPEG files can be stored locally, but check whether the format suits the editing you plan to do later. According to the manufacturer, the reflecta x66-Scan saves JPEG files to an SD card. The National Archives of the Netherlands lists TIFF as a preferred format and JPEG as an acceptable format for raster images in the context of government archiving. This list isn’t a legal requirement for a family archive.

What should I check before choosing a scanner or service?

Check that the right film holders, required software and any storage you need are available for your chosen scanner, and that the software works with your computer. The Consumentenbond points out that scanning yourself takes time too. If you’re using a service, agree in advance on the resolution, file formats and corrections they’ll provide.

Can I digitise and share family photos in the Netherlands?

The Dutch Government says you can make a private copy for personal use of someone else’s copyright-protected photos, but you can’t distribute or publish that copy. Check who holds the rights to the photos before sharing or publishing them.