If you mainly have 35mm colour negatives and limited cupboard space, a standalone scanner with SD storage is a practical option if you want to scan without a computer and JPEG files are all you need. If you’d like more control over your scans, a dedicated film scanner with a computer-based workflow may be a better fit. If you have 120 film or paper photos, you’ll also need to consider the right holders and the extra space required to set it up.
Who is a film scanner suited to if you have limited storage space?
A 35mm scanner for limited cupboard space
You mainly scan 35mm colour negatives and want to put the device away after use. Compare the scanner’s dimensions with the space needed for the holder, power supply and storage card. The reflecta x33-Scan is one example of a standalone option for 35mm film.
A 35mm scanner with image controls
You want to assess colour and visible dust, and are happy to use a computer-based workflow, but don’t want a large flatbed scanner to take up permanent space. The Plustek OpticFilm 8200i SE is a dedicated scanner for 35mm film.
Scanning different film formats
You have other negative formats as well as 35mm. The right holders matter, even if the scanner itself looks compact; models differ in the formats they support.
What should you look for in a film scanner?
| What to consider |
What to look for |
Who is this important for? |
| Storage and working space |
Measure the space where you’ll store the scanner and the clear space you’ll need while using it. Allow for film holders, cables and, if needed, a computer. |
If I have limited cupboard space, I also want to know how much room is needed to feed in the film; around 33% of consumers make storage and working space their first consideration. |
| Colour, detail and correction |
Check which settings and corrections the exact model offers. Distinguish between optical or sensor resolution and interpolated output; a higher output figure alone doesn’t prove that more detail has been captured. |
If I want to assess colour and detail carefully and am happy to spend more time scanning, I look at the available settings; around 27% of consumers give image control their highest priority. |
| Film formats and holders |
Make a note of your film formats and check which holders are supported and included with each version. Support for multiple formats doesn’t mean every format will fit. |
If I want to digitise formats other than 35mm as well, the holders need to fit my film; around 20% of consumers prioritise support for the right formats. |
| Scanning without a computer and saving files |
Check whether you need a storage card, what capacity is supported and whether a card is included. Also plan how you’ll transfer your files and keep a separate copy. |
If I’d rather scan without a computer, I want to save files easily and transfer them later; around 20% of consumers mainly choose standalone, easy-to-use options. |
Common mistakes when buying a film scanner
-
Choosing based on the highest dpi or megapixel figure
A quoted resolution alone doesn’t tell you how much detail you’ll see in the final scan. The reflecta x66-Scan is listed as offering 14 MP and 22 MP interpolated; these figures aren’t the same thing.
Check how the resolution is achieved, and start by assessing a test scan for the way you plan to use it.
A disappointing test scan could mean spending more time editing or having to scan again.
-
Comparing only the external dimensions
The scanner also needs room for film holders, cables and feeding in the film while it’s in use. A flatbed scanner needs space for its lid to open, too; according to Epson Nederland, the Epson Perfection V600 Photo measures 280 × 485 × 118 mm.
Measure both the storage space and the room needed while scanning, including space for any computer equipment.
Holders, cables or a computer may still mean you need a dedicated workspace.
-
Assuming every multi-format scanner accepts the same film
The Kodak 5-inch SLIDE N SCAN lists 110 and 126 film, while reflecta lists 120 film for the x66-Scan and notes that a holder for 126 is optional.
First, make a list of your film formats, then check which holders are supported and included with the exact version you’re considering.
You may need to buy an extra holder or use a different digitising method.
-
Thinking an SD storage scanner is a complete archive
Files saved to a card still need to be checked, transferred and stored safely after scanning. According to Kodak Photo Plus, the 5-inch Kodak SLIDE N SCAN requires an SD card, but one isn’t included.
Check whether a card is included, and allow time to review, transfer and store your images separately.
Organising, naming and storing files separately takes time, too.
Film scanner brands to consider
reflecta
The x33-Scan is a standalone option for 35mm negatives; the x66-Scan also supports 120 film.
- According to reflecta, the x33-Scan saves JPEG files to an SD card without a computer. For the x66-Scan, the manufacturer lists an included 120 holder and dimensions of 177 × 118 × 192 mm.
- For the x66-Scan, reflecta lists a holder for 126 film as optional. These specifications aren’t an independent comparison of image quality.
Plustek
The OpticFilm 8200i SE is designed for 35mm colour negatives and slides in a computer-based workflow.
- Plustek lists 7200 dpi optical resolution, an infrared channel and SilverFast SE Plus software included.
- The listed specifications don’t confirm support for 120 film. Check that the software supplied with the version on offer is compatible with your computer.
Kodak Photo Plus
The 5-inch SLIDE N SCAN is a standalone scanner for 135, 110 and 126 colour negatives, among other formats.
- The European product information lists adapters for the specified film formats and SD/SDHC storage up to 32 GB.
- An SD card is required but isn’t included. Make sure it’s the 14MP 5-inch version, not a 7-inch version with different specifications.
Epson
The Perfection V600 Photo is a flatbed option if you want to scan other originals as well as film.
- Epson Nederland lists support for 35mm and 120/220 film.
- Epson has marked the V600 as discontinued. If one is available, check its condition, holders and software; the scanner measures 280 × 485 × 118 mm.
Film scanners related to this topic
Related products coming soon.
Frequently asked questions about film scanners
For colour negatives, should I focus mainly on dpi or megapixels?
First check that your film fits the holder. Then distinguish between optical or sensor resolution and interpolation: reflecta lists 14 MP for the x66-Scan, as well as 22 MP interpolated. A larger output file alone doesn’t prove that more detail has been captured.
What should I do after scanning my film?
Check a few files for colour, cropping and dust before scanning your whole collection. Transfer the files from the SD card and keep a separate copy. If you’re feeding the film through by hand, allow time to organise and name the files, too.
Which accessories should I check before buying?
Check whether the film holders and storage card you need are included with the version you’re buying. According to Kodak Photo Plus, the 5-inch Kodak SLIDE N SCAN requires an SD card, but one isn’t included.
Can I share someone else’s scanned photos online?
The Dutch government distinguishes between making a private copy of copyrighted photos for personal use and distributing or publishing them. You generally need the creator’s permission for the latter; owning the negative doesn’t automatically give you that right.
Do I have a cooling-off period if I buy a scanner online?
According to the Dutch government, when you buy from a business at a distance, you’ll often have a 14-day cooling-off period. An online purchase from a private seller isn’t covered by the distance-selling rules; check the terms of the specific purchase.