Who is this guide for?

Creating files for clients

You want to assess colour negatives yourself and deliver files suited to the agreed use. The Dutch Consumers’ Association says the right choice depends, among other things, on the quality you want and the time you’re prepared to spend.

Scanning large batches of 35mm film

You process lots of film strips or rolls and want to spend less time feeding them in by hand, while still being able to check the scans afterwards. Reflecta and Pacific Image describe models with automatic feeding for 35mm film.

Scanning mixed formats

Your job may include 120 film as well as 35mm. The formats supported and the film holders actually supplied determine whether a scanner is suitable.

What should you look for?

First, establish which negative formats and client files the job requires. Then compare how easy the scanner is to use and how much time you’ll need for checking and editing.

What to considerWhat to look forWho should pay extra attention?
Film format and holder For each model, check that the scanning area, transparency unit and supplied holder are suitable for 35mm and, if needed, 120 film. If I receive both 35mm and 120 negatives, I want to know whether both can be scanned in full and whether the right holder is included. Around 29% of consumers put format and holder first.
Colour, detail and correction Discuss how the files will be used, check the available software settings and assess a test scan of representative negatives. If the client plans to edit the files further, I want to assess the colour and detail myself rather than relying on a stated resolution alone. Around 24% of consumers give this check top priority.
Throughput and working time Check whether the film strips or rolls are compatible with the feeder, and allow time for checking, colour correction and organising the files. For a large batch, I want to spend less time feeding film in by hand while still allowing time to check the files afterwards. Around 18% of consumers prioritise batch processing.
Files for the client Agree the format, desired scope for editing, file naming and transfer method in advance; then check what the scanner and software actually save. If the client needs a particular file to continue working, I want to agree this before scanning, rather than discovering it only when I hand the files over. Around 18% of consumers start with the required final file.
Simple preview scan Check which negatives the device supports, distinguish sensor resolution from output resolution, and find out whether storage media are included. If I mainly want to make a quick preview, a standalone scanner can be handy; I weigh that against the scope it offers for checking and editing images. Around 11% of consumers prioritise ease of use.

Common buying mistakes

  • Assuming a high dpi or megapixel figure guarantees a better client file

    A stated maximum output resolution is not the same as independently verified detail. Kodak lists a 13MP sensor and output of up to 22 MP for the Slide N Scan Max; these figures describe different things.

    Compare specifications on a like-for-like basis and assess a test scan against the agreed use. The Dutch Consumers’ Association notes that simple scanners generally deliver lower quality than a good film scanner.

    Allow time for test scans and any necessary corrections before handing over the files.

  • Choosing a flatbed scanner without checking the holders and software

    Format support won’t help if the right film holder is missing or the software won’t work on your computer. Epson lists the V600 Photo and V850 Pro as discontinued in the Netherlands.

    If you’re considering a particular unit, ask to check the holders and make sure the software works with your computer before buying.

    You may need to buy a suitable holder separately if it isn’t included with the unit.

  • Assuming automatic feeding means the client’s job is finished

    The stated feed or scan time doesn’t automatically include checking images, correcting colour and organising files.

    Test a representative batch and plan the entire workflow, not just the time needed to feed in the film.

  • Buying a standalone scanner without checking storage and file format

    A quick scan isn’t automatically the file you agreed with the client. An SD card is not included with the Kodak Slide N Scan Max.

    Check in advance which storage medium you’ll need and which files the device can actually produce.

    Bear in mind that you’ll need to provide your own SD card for the Kodak scanner mentioned.

Brands to consider

Plustek

The OpticFilm 8300i SE and 8300i Ai are computer-connected models for 35mm negatives. Compare the software included if colour assessment is important.

  • Plustek says the models have an infrared channel. For the Ai version, the brand lists SilverFast Ai Studio and a calibration target.
  • These models are designed for 35mm and aren’t a substitute for a 120 film scanner. The listed features alone don’t prove that a scan will have accurate colour without further assessment.

Reflecta

The RPS 10S is designed for batches of 35mm strips and rolls, with automatic feeding.

  • Reflecta lists feeding for 3 to 40 frames, infrared correction and DNG output.
  • The stated scan time isn’t the same as the total time needed to produce a checked client file. A test by Filmscanner.info also distinguishes between nominal and effective resolution.

Epson

The Perfection V600 Photo and V850 Pro are flatbed scanners with film holders for formats including 35mm and supported 120 formats.

  • Epson lists film-scanning features and TIFF output for these models.
  • Epson lists the V600 Photo and V850 Pro as discontinued in the Netherlands. If you’re considering one, check that the right holders are included, what condition it’s in and whether the software works on your computer.

Pacific Image

The PrimeFilm XA Plus is a computer-connected model for automatically processing 35mm film.

  • Pacific Image lists autofocus, feeding for up to 40 frames, infrared correction and DNG support.
  • Before buying, check that the software version and feeder are compatible with your computer and film strips.

Kodak Photo Plus

The Slide N Scan Max is a standalone scanner for previewing the film formats listed by the manufacturer, including 135.

  • The European product information lists a 13MP sensor, output of up to 22 MP and storage on an SD card.
  • The SD card isn’t included. The stated output resolution isn’t the same as the sensor resolution; the Dutch Consumers’ Association warns that simple scanners generally deliver lower quality than a good film scanner. The Kodak brand name on this product line is used under licence.

Joybuy products

Related products will be available soon.

Frequently asked questions

Does my scanner need to support 120 film if I also receive medium-format negatives?

Yes. If you want to scan full 120 negatives, both the scanner and the right holder need to support that format. The Plustek OpticFilm 8300i SE is designed for 35mm; Epson also lists support for 120/220 film for the V600 Photo.

Which files should I agree with the client for delivery?

Ask how the files will be used and agree the file format and any editing required in advance. For digital photographs, the Library of Congress lists TIFF, a high available bit depth and an embedded colour profile among its preferred features for preservation. This is an archival guideline, not a legal requirement or an automatic requirement for every client.

How should I handle negatives before scanning them?

Handle them carefully, avoid touching the image area and hold the film by its edges. The Library of Congress advises caution when removing dust, as even soft brushes can cause scratches, and recommends using a blower for loose dust.

What should I check about the software and holders on a second-hand flatbed scanner?

Before buying, check that the right film holders are included and that the required software works on your computer. The Dutch Consumers’ Association lists software compatibility as something to consider with remaining stock or second-hand flatbeds; Epson lists the V600 Photo and V850 Pro as discontinued in the Netherlands.

Can I hand over scans of identifiable people to the client without making any further arrangements?

First, consider the specific processing involved and your agreement with the client. According to the Dutch Data Protection Authority, identifiable people in photographs are personal data, and the GDPR applies to business use. Establish the purpose, lawful basis and appropriate security measures. If the commissioning party is the data controller and you act solely as a processor, the Dutch Data Protection Authority says that a data processing agreement is required; a client commission alone does not establish those roles.