Owner of a mixed collection of negatives
You want to find out first whether your collection includes 35mm, 120, 110 or 126 film. Supported formats vary by model: reflecta and KODAK list different combinations for their scanners.
First, check which film formats you have and decide whether you mainly want to select images quickly or create detailed scans you can edit. A standalone scanner may suit you if you want to save directly to a memory card; other models are designed for computer-based scanning or automatically feeding long strips of 35mm film. If you have a large collection, using a digitising service could save time, but ask in advance about formats, files and how the originals will be handled.
You want to find out first whether your collection includes 35mm, 120, 110 or 126 film. Supported formats vary by model: reflecta and KODAK list different combinations for their scanners.
You want to select lots of images or process long film strips before moving. Remember to allow time for checking and organising them too; the Consumers' Association lists the size of the collection and the time available as factors to consider.
You value control over scanning and editing more than saving directly to a memory card. Plustek describes the OpticFilm 8300i SE as a computer-based scanner for 35mm negatives and slides.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| Film formats | Sort a small sample and check which formats the exact model supports, as well as which holders are included. reflecta lists 35mm, 120 and 127 for the x66-Scan; KODAK lists 135, 110 and 126 for the Slide N Scan with 5-inch screen. The Plustek OpticFilm 8300i SE is designed for 35mm negatives and slides. | I want to make sure that all the formats in my family collection will fit the scanner. Around 36% of consumers say format support is their main concern when buying. |
| Processing time | Count the images and strips, and allow time for checking and file management too. reflecta specifies automatic feeding of 35mm strips with 3 to 40 frames for the RPS 10S; automatic feeding still leaves you with checking and organising to do. | I want to process lots of images before moving day without losing sight of the rest of the workflow. Processing time is the top priority for around 29% of consumers. |
| Scanning and file requirements | Compare the stated sensor resolution, any interpolation, file formats and software for the exact model. reflecta lists a 14MP sensor and JPEG storage for the x66-Scan; the stated 22MP output is interpolated. Plustek lists an infrared channel and SilverFast SE Plus 9 for the OpticFilm 8300i SE. | I want to keep files that suit the adjustments I may want to make myself later. Around 21% of consumers say editability and image quality are their main concerns when buying. |
| Buy or use a digitising service | Compare the current price of a suitable device with quotes for the actual number of images, the files you want and any editing. Ask a digitising service which formats and handling of originals are included too. | I want to weigh up the total cost before buying a scanner or choosing a service. Around 14% of consumers say total cost is their main concern when buying. |
For the reflecta x66-Scan and the KODAK Slide N Scan we looked at, the stated 22MP output is interpolated from a 14MP sensor. So the output figure alone doesn’t tell you how much detail has been captured from the original.
Compare the sensor, output and intended use. If possible, test one representative negative before scanning the whole collection.
If the files don’t meet your needs, scanning everything again will take extra time.
For film scans, you need suitable film holders and the right way of illuminating the film. Epson Netherlands lists the Perfection V600 Photo and V850 Pro we looked at as discontinued products.
Check the film formats, holders and software for the exact model. If you’re buying second-hand, check its condition too.
You’ll need the originals if you want to scan them again later. So keep your negatives safe, even after creating digital files.
The Library of Congress advises holding photographs by the edges or their sleeves, and working in a clean, dry environment. After scanning, make copies on different storage media and keep them in separate physical locations, as the Library of Congress advises.
If you dispose of the originals, you won’t be able to scan them again if you need a different scan later.
The OpticFilm 8300i SE is a computer-based option for 35mm negatives and slides.
The x66-Scan is a standalone scanner for formats including 35mm, 120 and 127; the RPS 10S is designed to feed 35mm strips automatically.
The Slide N Scan with 5-inch screen is a standalone option for 135, 110 and 126 negatives.
The Perfection V600 Photo and V850 Pro show which film formats flatbed scanners with film holders can handle.
No, not every scanner supports 120 film. reflecta lists this format for the x66-Scan; the Plustek OpticFilm 8300i SE we looked at is designed for 35mm film. Check the format support and holder for the exact model.
Work on a clean, dry surface and hold negatives by the edges or their sleeves. The Library of Congress advises handling them carefully and storing them in protective packaging; pack your originals to protect them from dust and unnecessary handling during the move.
No. The Library of Congress advises keeping copies on at least two different storage media and in separate physical locations. Check the files after transferring them from the scanner or SD card.
According to the Dutch Government, the retailer must provide a solution if there is a problem with a product. A manufacturer’s guarantee does not replace this legal right.
Don’t assume that the exception for personal or household use also applies to public publication. The Dutch Data Protection Authority describes this exception as covering images that remain private or are shared only with a very limited group; if you want to publish them more widely, consider which GDPR legal basis applies.