Who is this guide for?

Mixing alongside colleagues

You work on a film mix in a shared workspace and want to disturb your colleagues as little as possible. A closed-back model may help, but the fit also affects how much sound it blocks. Manufacturers such as beyerdynamic and Audio-Technica describe their models as closed-back.

Checking how the mix translates

You’re assessing balance and stereo placement and want to know which decisions to check again on other playback systems. iZotope explains that perceived stereo width can differ between headphones and speakers.

Working through long sessions

You wear your headphones for long periods, so you’ll want to consider the fit, cable routing and replaceable parts. For example, Audio-Technica lists a detachable cable for the ATH-M40x; check which parts are available for each model.

What should you look for when choosing?

Closed-back, wired

A good fit if: colleagues sit nearby or conversations distract you from your work.

Bear in mind: the seal depends on the fit; check your mix on other playback systems too.

Open-back, wired

A good fit if: you work in a quiet room and sound leakage is not an issue, for example when carrying out an additional listening check.

Bear in mind: an open-back design blocks little office noise and lets sound out.

First decide how much sound leakage is acceptable in your workspace, then check the fit, connection and maintenance requirements.

What to consider What should you check? Who is this important for?
Seal and sound leakage Try the ear cups on your own head and check how much sound is audible at a normal listening level. If colleagues sit nearby, I want to minimise sound leakage and avoid having to drown out conversations by turning up the volume. Around 36% of consumers prioritise isolation and sound leakage.
How the mix translates Use familiar reference material and check the balance and stereo placement on other playback systems too. When mixing a film, I mainly want to make useful decisions about balance and stereo placement. Around 29% of consumers prioritise how the mix translates.
Comfort Try the headphones on with any glasses you wear and check for pressure around your ears and the top of your head. If I’m working through long editing sessions, I want the fit to remain comfortable. Around 21% of consumers prioritise long-term comfort.
Connection and maintenance Check the plug, adapter, cable length and availability of replacement parts for the exact model variant. For my workspace, I want a suitable connection and parts I can replace if needed. Around 14% of consumers prioritise connection and maintenance.

Common buying mistakes

  • Choosing an open-back model just because it seems suitable for mixing

    Open-back headphones let sound out and block little office noise. This could disturb colleagues in a shared space.

    Choose this design only if your workspace and the people around you make it practical; otherwise, compare well-fitting closed-back models first.

  • Assuming a sound described as flat guarantees a mix that sounds good everywhere

    Sound varies between headphones, and stereo effects can come across differently from how they sound through speakers. A manufacturer's description does not prove how a model will sound on your head.

    Use familiar references and check your mix on other playback systems too.

  • Choosing an impedance variant or cable without checking your equipment

    beyerdynamic lists 32, 80 and 250 ohm variants of the DT 770 PRO. The connection and included accessories may differ between versions.

    Before ordering, compare the full model variant and connection with your computer or audio interface.

    If the connection isn’t suitable, you may need a compatible adapter or a different cable.

Relevant brands to compare

beyerdynamic

The DT 770 PRO is a closed-back, wired option for monitoring in a shared space.

  • beyerdynamic lists replaceable parts for the 80-ohm version reviewed here.
  • Check which impedance suits your output; details for one version do not automatically apply to the 32- or 250-ohm versions. The fit also affects the seal.

Audio-Technica

The ATH-M40x is a closed-back, wired model with a detachable cable.

  • Audio-Technica lists two included cables and a tuning aimed at flat sound reproduction.
  • This manufacturer description is not an independent measurement of neutrality or of how well the headphones seal on your head.

Sennheiser

The open-back HD 490 PRO may be a useful additional listening option when sound leakage in the room is not an issue.

  • Sennheiser lists a detachable cable and replaceable, washable ear pads.
  • The open-back design lets sound out and blocks little office noise; the manufacturer's description of spaciousness is not an independent measurement.

Sony

Sony Netherlands describes the MDR-7506 as suitable for recording and studio use.

  • For the MDR7506.EU, Sony Netherlands lists a weight of 230 g and a 3 m cable.
  • Check whether the cable length works for your desk; the listed specifications don’t tell you how comfortable or isolating the model will be for you.

Shure

The SRH840A is a closed-back option for anyone who values a detachable cable.

  • Shure lists an around-ear design and a locking, detachable cable.
  • For a Dutch listing, check the warranty and box contents for the exact version.

Joybuy products

This product selection includes headphones and headsets whose product information lists wired listening options. A wired connection alone does not automatically make a model suitable for assessing a film mix; check the design, connection and stereo reproduction of the exact version too.

Sennheiser MOMENTUM 4 Wireless, Black

Sennheiser MOMENTUM 4 Wireless, Black

The listed 3.5 mm connection and passive use without a battery may be useful if you want to listen over a wired connection.

The product information lists adaptive noise cancellation, a padded headband and deep ear pads. Check whether the wired connection and features of this wireless model suit your mixing work.

View at Joybuy
Bose QuietComfort Ultra Headphones (2nd Gen), Olive Green

Bose QuietComfort Ultra Headphones (2nd Gen), Olive Green

The listed detachable cable may come in handy if you want to listen over a wired connection; check that the connections are compatible with your equipment.

The product information lists USB-C and 3.5 mm connections, as well as active noise cancellation. No charger is included and PD fast charging is not supported. The product information mentions magnets; if this is relevant to you, check the safety information for the exact version.

View at Joybuy
Bose QuietComfort Ultra Bluetooth Headphones, Black

Bose QuietComfort Ultra Bluetooth Headphones, Black

The listed closed-back design and audio cable are relevant if you’re looking for a wired listening option.

The product information lists Bluetooth 5.3 and active noise cancellation. Check that the included audio cable connects to your equipment; noise cancellation alone is not enough to determine whether these headphones are suitable for assessing a mix.

View at Joybuy
Jabra Evolve2 75 Headset

Jabra Evolve2 75 Headset

The listed USB-C cable for wired use may be useful if you need a wired connection.

The product information lists Bluetooth 5.2, active noise cancellation, an adjustable headband and soft ear pads. Check the connection and stereo reproduction before using this headset to assess a film mix.

View at Joybuy
Jabra Evolve2 65 USB-A Black MS Mono

Jabra Evolve2 65 USB-A Black MS Mono

This mono version is not suitable for assessing the stereo placement of a film mix.

The product information lists Bluetooth 5.0, a detachable cable and a USB-A Bluetooth adapter. Check which connection you need; the mono version remains unsuitable for stereo mixing.

View at Joybuy

Frequently asked questions

Can you finish a film mix entirely on headphones?

You can mix on headphones, but if possible, check your mix on other playback systems too. According to iZotope, tonal balance and perceived stereo width can sound different through headphones than through speakers.

Are open-back or closed-back headphones better suited to a shared office?

A well-fitting closed-back model is generally the practical starting point when colleagues sit nearby or conversations are distracting. An open-back model may suit additional critical listening in a quiet room where sound leakage is not an issue.

What should you check about the connection?

Compare the output on your computer or audio interface with the plug and any adapter supplied with the exact headphone version. For the DT 770 PRO, beyerdynamic lists 32, 80 and 250 ohm variants; check which version and connection are compatible with your equipment.

How can you check whether headphones will be comfortable for long sessions?

Try the headphones on your own head, including with any glasses you wear. After a while, check for pressure around your ears and the top of your head, and make sure the ear pads fit properly; product specifications can’t tell you how well they’ll fit you personally.

How can you avoid turning the volume up to drown out office noise?

Start at a low volume and keep track of how long you listen overall. The WHO gives 80 dB for up to 40 hours per week as an example of a safe listening exposure; this is not a measured setting for the headphones mentioned here.