Start by deciding what you need it for: use a separate drive for backups, a portable SSD to transfer projects or a working drive for active files. Then check the capacity, connections and formatting across all the studio computers. A working drive holding the only copy of a session is not a separate backup.
Who is an external SSD suitable for?
Studio owners who want to protect their recordings
If you want to be able to restore sessions and raw recordings, it’s worth keeping a separate copy alongside your active project drive. Ableton recommends manually storing projects and recordings on a separate backup drive.
Producers who switch between computers
To move projects between workstations, you’ll need suitable connections and a file system that works with the computers you use. Ableton also points out that plug-ins aren’t copied to the project folder.
Creators who work directly from the SSD
If you use active audio files from an external drive, the best way to assess the connection and transfer speed you need is to test them with your own studio setup.
What should you look for when choosing one?
Separate backup drive
Choose this if: you want to keep your sessions and recordings separate from your active files.
Trade-off: keeping a separate copy requires extra storage and management.
Portable project or working drive
Choose this if: you move projects between studio computers or work directly from the SSD.
Trade-off: the quoted peak speed doesn’t guarantee how an audio session will perform in your setup.
Drive with access protection
Choose this if: you want to control who can unlock files.
Trade-off: agree on who will manage passwords or recovery access, and check that unlocking works on all the computers you use.
| What to consider |
What to check before buying |
Who is this important for? |
| Storing recordings and capacity |
Work out how much space your projects need and how much room you want for growth; set aside storage for a separate backup. |
If I want to be able to restore sessions and raw recordings, I allow space for a separate copy. Around 36% of consumers put data retention and capacity at the top of their buying priorities. |
| Sharing projects |
Check operating systems, ports and cables; test that the complete project folder opens on the other computer. |
If I move projects between studio computers, I want to take the audio files I use with me too. Around 29% of consumers prioritise sharing projects. |
| Working directly from the SSD |
Check that the connection and cable are compatible with your computer, and test a representative session in your own setup. |
If I use audio files directly from the drive, I want to know how it performs with my studio connection. Around 21% of consumers say performance during active work is their top buying priority. |
| Access to files |
Decide who needs access and check how unlocking works on the computers you use. |
If not everyone in the shared space should be able to open files, I want to set up access controls in advance. Around 14% of consumers prioritise restricted access. |
Common buying mistakes
-
Treating a working drive as your only backup
A drive holding the only active session still contains just one copy of those files. Ableton recommends keeping a separate backup of projects and recordings.
Keep a separate copy and regularly check that you can reopen your projects and audio files.
Keeping a separate copy requires extra storage and management.
-
Copying only the project file
Audio files used in a project may be stored outside its folder. That means the project file alone may not include all the media you need.
Gather the media you use according to your DAW’s workflow, then transfer the complete project folder. In Ableton Live, ‘Collect All and Save’ can copy used audio files into the project folder; plug-ins aren’t copied.
-
Assuming the maximum MB/s speed is the speed you’ll get in the studio
A quoted maximum sequential speed doesn’t guarantee the transfer speed you’ll get during an active audio session. A shared USB hub can also become a bottleneck.
Check the host port and cable, and test your own audio setup before choosing based on a peak-speed figure.
-
Assuming the Crucial X9 and X9 Pro are the same model
Similar model names don’t mean the products have the same specifications.
Check the full model number; don’t treat CT2000X9PROSSD9 as an X9 unless you’ve confirmed they’re the same version.
Brands and product ranges to consider
Samsung
The T7 Shield is a portable range worth comparing if you’ll be moving the drive around regularly.
- Samsung lists the T7 Shield with 2 TB capacity, USB 3.2 Gen 2, sequential speeds of up to 1.050/1.000 MB/s and an IP65 rating.
- In a review dated 26 April 2022, Tweakers rated the protection of the Shield model it tested positively, but noted that it was larger than the standard T7 and that the rubber coating attracted dust. This finding applies to the model tested.
Kingston
The XS1000 is a portable range for transferring files and backing them up, while IronKey Vault Privacy 80 is a separate range with hardware-based access protection.
- Kingston lists capacities of up to 2 TB for the XS1000, along with USB 3.2 Gen 2 and USB-A and USB-C connectivity.
- Don’t confuse the ranges or their performance: Kingston lists maximum read speeds of 230 MB/s and write speeds of 250 MB/s for the 3.840 GB IronKey VP80ES model.
Crucial
The X9 Pro 2 TB is a portable SSD worth comparing if you move projects between devices.
- For model CT2000X9PROSSD9, Crucial lists read and write speeds of up to 1.050 MB/s and ships it formatted in exFAT. Crucial lists BitLocker To Go and FileVault as supported options.
- According to Crucial, you’ll need a compatible USB 3.2 Gen 2 host and cable to reach the highest speeds. Reformatting erases the data on the drive.
External SSDs at Joybuy
These portable external SSDs are designed for storing or transporting studio projects. Compare capacity, connectivity and any access protection with the computers and workflow in your studio.
No image available
SanDisk Portable SSD 1TB
A portable option for taking files between workstations.
Capacity: 1 TB. Read speeds of up to 800 MB/s. The product description mentions drop protection from heights of up to 2 metres and a carabiner loop.
Don’t use this active project drive as the only copy of your sessions; keep a separate backup.
Joybuy
No image available
SanDisk Extreme Pro Portable SSD 1TB
Worth considering if you’re looking for portable storage with hardware encryption.
Capacity: 1 TB. USB 3.2 Gen 2x2 and AES hardware encryption. Read speeds of up to 2.000 MB/s.
The quoted read speed requires a compatible USB 3.2 Gen 2x2 host; write speeds are lower. Keep a separate backup of active projects too.
Joybuy
No image available
WD My Passport SSD WDBAGF0010BGY 1 TB
A portable option for projects moved between Windows and macOS computers.
Capacity: 1 TB. USB 3.2 Gen 2 and read speeds of up to 1.050 MB/s. The product description mentions AES hardware encryption.
WD Security must be installed for password protection and hardware encryption. Also keep a separate backup of active projects.
Joybuy
No image available
Portable SSD 1TB 1000MB/s
A portable option for storing and transporting project files.
Capacity: 1 TB. USB-C and USB 3.2 Gen 2. Read speeds of up to 1.000 MB/s. The product description lists support for Windows, macOS, iPadOS and Android.
Check that the connection is compatible with the computer you want to use the drive with. An active project drive is no substitute for a separate backup.
Joybuy
No image available
DigiEra LPS2000M-3 1TB Magnetic Portable SSD
A portable storage option worth comparing for large project files.
Capacity: 1 TB. USB-C and USB 3.2 Gen 2x2. Quoted speeds: up to 2.000 MB/s read and 1.800 MB/s write.
Check that your computer supports the connection specified and test the drive in your own setup. Keep active projects on a separate backup too.
Joybuy
Frequently asked questions
Can one external SSD be both my working drive and my only backup?
Keep a separate backup of your projects and recordings alongside your working drive. Ableton explicitly recommends using a separate backup drive for this.
What should I take with me when moving a project to another studio computer?
Take the complete project folder, including the audio files you’ve used, and test that the project opens on the other computer. In Ableton Live, ‘Collect All and Save’ copies used audio files into the project folder, but plug-ins need to be installed separately on each computer.
Which file system should I choose if the studio uses Windows and macOS?
Check the computers and software you use before formatting. Ableton lists exFAT as compatible with Windows, and Crucial ships the X9 Pro formatted in exFAT. Reformatting erases the data on the drive.
Does a shared studio need to protect recordings on an SSD under the GDPR?
If an organisation processes personal data, the Dutch Data Protection Authority says it must determine appropriate security measures based on the risks. Whether files on an SSD contain personal data, and which measures are appropriate, depends on their content and who has access. This doesn’t mean that one particular SSD model is required.