Who is this relevant to?

Studio with linked BIM files

You’re moving a model with external references and want the complete project files to open at the new location. For Revit, Autodesk describes eTransmit as a tool for archiving models together with linked files.

Studio with a tight moving deadline

You need to copy large project files on time and take the drive between workstations. Capacity and compatible connections are important too.

Studio with an extensive project archive

You’re storing several large project versions and can allow more time for copying. Storage space and a separate backup are both important considerations.

What should you consider when choosing?

External SSD

A good fit if: you’re short on time to make the copy or regularly transport the drive.

Bear in mind: stated speeds don’t guarantee how long your project will take to copy. Also check the USB connections on both workstations.

External HDD

A good fit if: you mainly need space for several project versions and have time to copy them.

Bear in mind: the Dutch Consumers’ Association says an HDD is more susceptible to knocks than an SSD, so take care when transporting it.

What to consider What should you check? Who is this for?
Complete project files Identify which files belong to the model. Save any changes you want to keep, then open the copied files from their destination. I want the model to open with its linked files after the move. Consumers who prioritise recoverability make up around 36%.
Copy time and transport Check the connections and cables on both workstations, and leave time for a recovery test. If the drive needs to be ready before packing and will be carried between workstations, getting the transfer done on time is important. Consumers who prioritise copy time and transport make up around 29%.
Space for versions Compare the capacity with the complete project folder and the versions you want to keep; don’t look only at the main model. I want to keep several large project versions, not just the current drawing. Consumers who prioritise archive space make up around 21%.
Confidentiality Check whether the project files contain personal data and whether any security features are actually enabled and usable on the receiving workstation. If a portable drive is lost, I want to limit unauthorised access to confidential files. Consumers who prioritise confidentiality make up around 14%.

Common pitfalls

  • Copying only the main model

    A project may rely on files stored outside the same folder. As a result, the model may not open completely after the move.

    Gather all relevant dependencies. For Revit, Autodesk describes eTransmit as a way to include the model and linked files. Then open the transferred project files.

    Missing references after the move can take extra time to track down and restore.

  • Using the moving drive as your only backup

    If the drive and the original equipment are exposed to the same risks during the move, one incident could affect both copies.

    Keep another backup separately and test that you can restore the files from it. The National Cyber Security Centre advises keeping several versions of important business data.

  • Assuming the connection and formatting will work automatically

    The connection or formatting may not be compatible with the receiving workstation. Toshiba states that the Canvio Basics range needs to be reformatted for macOS.

    Check both workstations, the supplied cable and the file system in advance. Don’t format the drive until you have another safe copy.

    An incompatible connection or format may mean extra preparation or the need for a suitable cable.

  • Assuming a security feature means your backup is already protected

    Password protection is model-specific and isn’t necessarily set up by default. Western Digital warns that data will be lost if you forget the password you set on supported WD Security drives.

    Check that your model and operating system are supported, set up the feature, and test that an authorised colleague can open the copy.

    A password feature requires careful management of the password and any recovery details.

Brands to compare

Samsung

The portable T7 and T7 Shield SSD ranges are options for project files you want to take with you.

  • Samsung lists USB 3.2 Gen 2, sequential speeds of up to 1.050/1.000 MB/s and an IP65 rating for the T7 Shield 2 TB. These are manufacturer specifications, not measured copy speeds or a guarantee against data loss.
  • The standard T7 is a separate range, so don’t assume it has the same casing features.

Seagate

The Expansion range includes portable HDD models for project files and archives.

  • Seagate lists 2 TB and 4 TB models with USB 3.0 in this range.
  • Check the model number, capacity and connection for the specific version. General speed claims don’t tell you how quickly your project will copy.

Toshiba

Canvio Basics is a portable HDD range worth comparing for a project archive.

  • Toshiba lists USB 3.2 Gen 1 and a USB-A-to-Micro-B cable for a 2 TB Canvio Basics model.
  • Toshiba says the range needs to be reformatted for macOS. Check the specific model and receiving workstation before making the final copy.

Kingston

The XS1000 is a compact external SSD range for a project set that fits within the chosen capacity.

  • Kingston lists models of up to 2 TB, USB 3.2 Gen 2 and a stated read speed of up to 1.050 MB/s.
  • Check the connection and make sure the chosen capacity is large enough for all your project files.

Western Digital

Supported My Passport models are worth comparing if configurable access protection is a factor in your choice.

  • Western Digital says WD Security can password-lock supported drives with hardware encryption.
  • This feature isn’t available on every WD drive. Western Digital warns that data will be lost if you forget the password you set.

Joybuy products for project backups

This selection includes portable external SSDs for carrying and transferring project files, and portable HDDs for project archives with several versions.

Portable external SSD, 1 TB, 1.000 MB/s

Portable external SSD, 1 TB, 1.000 MB/s

Suitable for carrying a project copy between workstations.

Capacity: 1 TB.

View at Joybuy
Samsung Portable SSD T7 2 TB USB Type-C Blue

Samsung Portable SSD T7 2 TB Blue

Suitable for carrying a project copy when the workstations are set up for the chosen connection.

Capacity: 2 TB. Connection: USB Type-C, USB 3.2 Gen 2.

View at Joybuy
Samsung Portable SSD T7 1 TB USB Type-C Blue

Samsung Portable SSD T7 1 TB Blue

Suitable for carrying a project copy when the project files fit within the chosen capacity.

Capacity: 1 TB. Connection: USB Type-C, USB 3.2 Gen 2.

View at Joybuy
WD Elements Portable 5 TB USB-C Graphite Black

WD Elements Portable 5 TB USB-C Graphite Black

Suitable for a portable project archive with several versions, if the chosen capacity is sufficient.

Capacity: 5 TB. Connection: USB-C. Handle the drive carefully when transporting it.

View at Joybuy
Western Digital My Passport USB-C 4 TB Black

Western Digital My Passport USB-C 4 TB Black

Suitable for a project archive where storage space and setting up access protection are important considerations.

Capacity: 4 TB. Connection: USB-C. Set up password protection separately and check it before you leave; handle the drive carefully when transporting it.

View at Joybuy

Frequently asked questions

Is it enough to copy only the main model to an external drive?

Not if the project relies on linked files. For Revit, Autodesk describes eTransmit as a way to bring together a model and its associated files. Save any changes you want to keep first, then open the transferred copy to check it. The National Cyber Security Centre also advises testing restores and keeping backups separately.

Can I use a new drive straight away on both a Mac and a Windows workstation?

Check the exact model and its format before making the copy for your move. Toshiba says the Canvio Basics range needs to be reformatted for macOS. Don’t format the drive until you’ve safely stored the project files somewhere else.

What if the drive or its security password is lost?

Keeping a separate, tested backup means you won’t have to rely on that one drive to restore your files. Western Digital warns that data will be lost if you forget the password you set on supported WD Security drives, so keep recovery details safe and separate.

Does a studio in the Netherlands need to encrypt a backup taken during a move?

First, consider what data the project copy contains and the risks involved. If the studio processes personal data, the Dutch Data Protection Authority says the GDPR requires appropriate technical and organisational measures based on the risks. Drive encryption may be one possible measure. The right level of protection depends on the processing and the circumstances.

What warranty rights apply if the drive develops a fault?

This depends in part on whether the drive was bought for personal use or by the studio. Dutch government information describes statutory consumer rights for goods to conform to their description, alongside any commercial warranty. Different rules apply to business sales. If you’re placing a business order, check the agreed warranty terms too.