Who is this choice relevant to?

CAD user who often transfers projects

You regularly move complete project folders between computers and want to know whether both connections can make the most of your external SSD’s speed.

Designer looking to prevent project loss

You store working files and also want to be able to restore separate copies. A portable working drive on its own isn’t enough.

Manager of a growing CAD archive

You’re storing more and more completed projects and weighing up storage capacity against how often you need to transfer files again.

What should you look for when choosing?

External SSD with USB 3.2 Gen 2

A good fit when: you often transfer project folders and both computers support this connection.

Trade-off: manufacturers’ figures for sequential transfers don’t tell you how much faster your complete CAD project will transfer.

External SSD with USB 3.2 Gen 2x2

A good fit when: you regularly transfer large files and the computers involved support Gen 2x2.

Trade-off: without a compatible host connection, the quoted peak speed isn’t a reason to choose this over Gen 2.

External HDD for an archive or copy

A good fit when: storing lots of completed projects or keeping a separate backup matters more than transferring them quickly and often.

Trade-off: a USB 3.0 label doesn’t provide a measured CAD transfer speed, and one HDD isn’t automatically a complete backup strategy.

First, work out which computers and ports you use. Then choose based on transfer needs, recoverability and the size of your archive.

What to consider What to look for when buying Who is this most relevant to?
Time spent transferring projects regularly Check the USB specification and cable on both computers, and compare the quoted read and write speeds. I often transfer complete CAD project folders between computers and want to know whether both ports can handle the SSD. Frequent project transfers are the main reason for buying for around 36% of consumers.
Recoverable project copies Work out which files and references need to be included, where a separate copy is stored and how you’ll test recovery. I want to be able to retrieve a project if the working drive fails, so a second, verifiable copy matters. Recoverability is the top priority for around 29% of consumers.
Space for a growing archive Check the size of your project folders and decide which files you transfer often and which you mainly keep for reference. I keep lots of completed projects but regularly move only some of them. Archive space is the main reason for buying for around 21% of consumers.
Taking projects with you safely Check the stated protection and whether the security features suit your devices and files. I take project files between workspaces and want to be able to arrange suitable protection and access security. Taking files with you safely is the main need for around 14% of consumers.

Common mistakes when choosing

  • Assuming an advertised SSD peak speed guarantees the same speed for CAD

    Quoted sequential speeds apply to a particular connection and test setup. A complete project folder with references may behave differently from a single large file.

    Check the ports, then test transferring and opening one of your own complete project folders.

  • Keeping your only project copy on the drive you take with you

    If that working drive fails or goes missing, you could lose the project too if you don’t have a separate copy.

    Keep important files separately and test that you can restore them from the backup. The National Cyber Security Centre advises protecting important business data using the 3-2-1 approach and testing recovery.

  • Choosing a large HDD based on its USB specification alone

    The USB 3.0 label on the Seagate Expansion Portable doesn’t measure how quickly CAD folders will transfer.

    Separate your need for archive space from your need for frequent transfers. An HDD may be an option when storage is the priority.

  • Formatting a drive before securing your files elsewhere

    Crucial warns that reformatting the X9 Pro erases the data on the drive.

    First check which file format you need, and make a separate copy of your project files before formatting.

Relevant brands

Samsung

The T7 Shield is a Gen 2 option; the T9 is designed for use with a compatible Gen 2x2 connection.

  • Samsung quotes sequential speeds of up to 1.050 MB/s read and 1.000 MB/s write for the T7 Shield 2 TB, and up to 2.000 MB/s for the T9 2 TB.
  • These are manufacturer figures for different models, not independent CAD tests. Check that the host port is compatible with your chosen connection.

Kingston

The XS2000 series is a range of portable Gen 2x2 storage; Kingston lists capacities from 500 GB to 4 TB.

  • Kingston quotes speeds of up to 2.000 MB/s for both reading and writing for the XS2000, along with IP55 protection and a removable protective sleeve.
  • These quoted speeds haven’t been tested for a CAD workflow and depend on the connection.

Crucial

The X9 Pro 2 TB is a portable Gen 2 option for use with multiple devices.

  • Crucial quotes speeds of up to 1.050 MB/s for both reading and writing under its own test conditions, and says the drive ships in exFAT format.
  • Performance and compatibility may vary. Reformatting erases the data on the drive, so make a separate copy first.

Seagate

The Expansion Portable is an HDD option for anyone looking to keep an archive or a separate copy.

  • Seagate lists a capacity of 5 TB and USB 3.0 for the model reviewed.
  • The interface label alone doesn’t tell you how quickly CAD project folders will transfer in practice.

External SSDs for transferring projects

This Joybuy selection features external SSDs for storing and transferring CAD project files. When choosing, consider capacity, connection type and support on both computers.

SanDisk Portable SSD 1TB

SanDisk Portable SSD 1TB

A portable 1 TB SSD for storing and transferring project files.

Joybuy lists read speeds of up to 800 MB/s and drop protection from heights of up to 2 metres. Check the connection and test the transfer of your own project files.

View at Joybuy
SanDisk Extreme Pro Portable SSD 1TB

SanDisk Extreme Pro Portable SSD 1TB

A 1 TB SSD for frequently transferring large project files, provided the computers support the connection.

Joybuy lists USB 3.2 Gen 2x2, read speeds of up to 2.000 MB/s, IP65 protection and 256-bit AES password protection; write speeds are lower. The quoted read speed requires a compatible host connection and doesn’t guarantee the speed of a CAD project transfer.

View at Joybuy
Portable external SSD 1TB 1000MB/s

Portable external SSD 1TB 1000MB/s

A portable 1 TB SSD for taking project files with you and transferring them.

Joybuy lists USB-C, USB 3.2 Gen 2 and read speeds of up to 1.000 MB/s, as well as drop protection from heights of up to 2 metres. Check that the connection is compatible with both computers.

View at Joybuy
Samsung Portable SSD T7 2TB USB Type-C 3.2 Gen 2 Blue

Samsung Portable SSD T7 2TB USB Type-C 3.2 Gen 2 Blue

A portable 2 TB SSD for repeatedly transferring project folders.

Joybuy lists USB 3.2 Gen 2, sequential read speeds of up to 1.050 MB/s and write speeds of up to 1.000 MB/s, AES 256-bit encryption and drop protection from heights of up to 2 metres. The quoted speed doesn’t mean a CAD project will transfer at that rate.

View at Joybuy
Samsung Portable SSD T7 1 TB USB Type-C 3.2 Gen 2 Blue

Samsung Portable SSD T7 1 TB USB Type-C 3.2 Gen 2 Blue

A portable 1 TB SSD for taking CAD project files with you and transferring them.

Joybuy lists USB 3.2 Gen 2, sequential read speeds of up to 1.050 MB/s and write speeds of up to 1.000 MB/s, AES 256-bit encryption and drop protection from heights of up to 2 metres. Check the host connection; the quoted speed doesn’t guarantee a particular CAD transfer rate.

View at Joybuy

Frequently asked questions

Can I edit an AutoCAD project directly from an external drive?

This won’t work smoothly in every situation; Autodesk describes delays when working from external drives. If you experience them, test the complete project, including xrefs and other references, from the local drive. ETRANSMIT can help you gather the project files you need.

What should I check before using a drive with two computers?

Check the port and file format on both computers, and test that the project opens in full. Crucial says the X9 Pro ships in exFAT format; compatibility depends on the host and formatting. Reformatting erases the data on the drive.

Is my external project drive also my backup?

Not if it contains your only copy. For important business data, the National Cyber Security Centre advises following the 3-2-1 approach and recommends testing whether files can be restored from the backup.

What warranty applies to a drive bought in the Netherlands?

When you buy as a consumer, you’re entitled to a product that meets the terms of the agreement. According to the Government of the Netherlands, there’s no fixed statutory warranty period in the Netherlands; any manufacturer’s warranty is in addition to this. If a product is faulty, contact the retailer.

Do CAD files on a portable drive need to be secured under the GDPR?

If an organisation processes personal data in those files, it must determine appropriate security measures based on the risks. For this general situation, the Dutch Data Protection Authority doesn’t prescribe one particular SSD model or a single encryption setting.