Who is this guide for?

Studio with irreplaceable design versions

Wants to find and restore earlier concepts after the move. The Digital Trust Center advises against relying on a single location for backups and recommends testing periodically that files can be restored.

Studio with a large archive

Needs to measure the total size of the selected files and compare it with the capacity of the chosen version. Kingston lists 1 TB and 2 TB versions for the XS1000; check the capacity of the specific model you’re considering.

Team with Mac and Windows workstations

Needs to check that files can be opened and saved on the relevant systems. Apple describes exFAT as compatible with Windows and warns that a Mac may be able to read NTFS, but not write to it.

What should you look for?

First, measure the folders and versions you’re taking with you, then check the connection and file system on the computers involved. Only after that, consider whether a more rugged case or faster transfer speeds will really matter for your move.

What to consider What should you check? Who is this important for?
Restoring design versions Keep a separate copy and open or restore a selection of files after copying them. If I don’t want to lose earlier designs after the move, I check that the copy is genuinely readable. Around 33% of consumers say the ability to restore files is their main concern.
Capacity for the archive Measure the total size of the selected files and versions, then compare it with the capacity of the exact version. If I want to take all my chosen folders on one drive, I match its capacity to the measured size. Around 27% of consumers put archive capacity first.
Reading and writing on different computers Check the ports, cables and file system; test reading and writing on the computers you plan to use. Back up the drive before reformatting it. If the team needs to use the archive on Mac and Windows computers, I want to know whether files can be saved on both systems. Around 20% of consumers give compatibility the highest priority.
Time needed for large transfers Check that the computer and cable support the stated interface. A manufacturer’s maximum figure doesn’t guarantee the speed of your archive copy. If I regularly move large files and want transfers to run smoothly, I look at both the connection and how often I’ll use it. Around 20% of consumers put transfer time at the top of their list.

Common pitfalls

  • Assuming a drop-resistant SSD is a complete backup

    A protective case doesn’t confirm that files have been copied correctly or can be restored later.

    Keep another copy and test selected files before dismantling the studio.

    Keeping a separate copy requires extra storage space and time for a restore test.

  • Choosing a drive based on the highest MB/s figure

    Your computer’s connection and the cable you use can limit transfer speeds. A quoted maximum won’t tell you how long it will take to copy your entire archive.

    Check the host interface and cable before choosing a USB 3.2 Gen 2x2 model for its speed.

  • Checking only the USB-C connector

    A connector that fits doesn’t tell you whether you can save files on another computer. According to Apple, a Mac may be able to read NTFS, but not write to it.

    Test the file system on the Mac and Windows computers you plan to use before clearing the original files.

    If you need to reformat the drive, safely transferring the data will take time.

Brands to consider

Samsung

The T7 Shield is an option for carrying around, while the T9 is aimed at workstations with USB 3.2 Gen 2x2.

  • Samsung lists an IP65 rating for the T7 Shield, with maximum read and write speeds of 1.050 and 1.000 MB/s respectively.
  • For the T9, Samsung quotes speeds of up to 2.000 MB/s. This is a manufacturer’s figure that depends on the model and connection, not a guaranteed speed for every studio archive.

Kingston

The XS1000 is a compact storage option with USB-A and USB-C connectivity; the XS2000 needs a suitable USB 3.2 Gen 2x2 workstation.

  • Kingston specifies 1 TB and 2 TB versions of the XS1000 and lists a USB-A cable and USB-C adapter as included.
  • For optimum XS2000 performance, Kingston specifies a suitable 20 Gbit/s interface and the included cable.

LaCie

The Rugged SSD Pro is a product line for creative workstations that need protection during transport and a suitable Thunderbolt connection.

  • Seagate specifies an IP67 rating and speeds of up to 2.800 MB/s via Thunderbolt 3 for the LaCie Rugged SSD Pro.
  • The quoted speed applies to the specified connection. Check that your computer supports Thunderbolt 3 before taking this speed into account.

External SSDs at Joybuy

These Joybuy picks are portable external SSDs for design files. Compare the capacity, stated connection and any conditions attached to the quoted speed for each version.

SanDisk Portable SSD 1TB

SanDisk Portable SSD 1TB

An option for an archive that fits within 1 TB, with a drive you can take with you.

The quoted read speed is up to 800 MB/s; the description mentions drop protection from heights of up to 2 metres and an integrated rubber hook.

View at Joybuy
SanDisk Extreme Pro Portable SSD 1TB

SanDisk Extreme Pro Portable SSD 1TB

Could suit an archive of up to 1 TB if your computer supports the required connection.

The description lists IP65 and a maximum read speed of 2.000 MB/s. This quoted speed requires a compatible USB 3.2 Gen 2x2 host; the write speed is lower.

View at Joybuy
Portable SSD 1TB 1000MB/s

Portable SSD 1TB 1000MB/s

An option for an archive of up to 1 TB and workstations with different connection options.

The product information lists USB 3.2 Gen 2, a maximum read speed of 1.000 MB/s and IP65. A USB-C cable and USB-A adapter are also mentioned.

View at Joybuy
Samsung Portable SSD T7 2TB USB Type-C 3.2 Gen 2 Blue

Samsung Portable SSD T7 2TB Blue

Could suit an archive of up to 2 TB for use on Windows and macOS workstations.

The product information lists USB 3.2 Gen 2, maximum read and write speeds of 1.050 and 1.000 MB/s, and drop protection from heights of up to 2 metres. USB-C to USB-C and USB-C to USB-A cables are mentioned.

View at Joybuy
Samsung Portable SSD T7 1TB USB Type-C 3.2 Gen 2 Blue

Samsung Portable SSD T7 1TB Blue

Could suit an archive of up to 1 TB for use on Windows and macOS workstations.

The product information lists USB 3.2 Gen 2, maximum read and write speeds of 1.050 and 1.000 MB/s, and drop protection from heights of up to 2 metres. USB-C to USB-C and USB-C to USB-A cables are mentioned.

View at Joybuy

Frequently asked questions

Is one external SSD enough for the archive during the move?

Don’t rely on the SSD as your only way to restore files. The Digital Trust Center advises keeping backups in different locations and testing periodically that files can be restored.

Which file system should I check if the studio uses both Mac and Windows?

Check how the SSD is formatted and test reading and writing on the computers involved. Apple says exFAT is compatible with Windows; according to Apple, a Mac may be able to read NTFS, but not write to it. Make a copy before reformatting the drive.

Do I need a 2.000 MB/s SSD to copy files before the move?

Not just because of its quoted speed. Kingston says the XS2000 needs USB 3.2 Gen 2x2 and a suitable cable for optimum performance. Also consider how often you need to transfer large files and whether your computer supports the connection.

Do all design files in the Netherlands need to be on an encrypted SSD?

The information described here doesn’t establish a general requirement for an SSD or encryption for all design files. If the studio processes personal data, the GDPR does require the organisation, according to the Dutch Data Protection Authority, to use appropriate security measures that reflect the processing and the risks. Decide which measures are needed for your files and working practices.