CAD user with limited workspace
You’re looking for extra project storage that takes up little physical space. Check both the dimensions of the drive and how much room your project folders need.
First, choose a capacity that can accommodate your complete CAD project folders. Then decide which size and connection suit your workspace and computer. A compact SSD is handy when space is limited, but it is not a backup on its own: keep a separate copy and test that you can restore and open your files. Move drawings along with their linked files, and check that the references still work.
You’re looking for extra project storage that takes up little physical space. Check both the dimensions of the drive and how much room your project folders need.
You keep several projects and revisions. Capacity and a separate, restorable backup are important, as well as the stated speed.
You switch between workspaces or take files with you. Consider the connection, protection during transport and references to linked files.
First, work out how much space your complete project folders need. Then compare the size and connection, and keep a separate copy for recovery.
| What to consider | What to look for | Who this matters to |
|---|---|---|
| Physical dimensions | Check the dimensions of the exact model and make sure there’s enough room for the cable. | If I have little space next to my computer, I want a drive that fits there comfortably. Around 31% of consumers prioritise the smallest physical size. |
| Space for projects | Include the files in complete project folders, linked files and revisions in your calculations. | If I want to keep several projects and versions, the capacity needs to meet that requirement. Around 25% of consumers prioritise space for complete projects. |
| Transfer and connection | Check that the SSD, cable and computer interfaces are compatible. | If I often move large folders between workspaces, I want a connection that works with my computer. Around 19% of consumers prioritise transferring files between workspaces. |
| File recovery | Set aside space for a separate backup and test that you can restore and open your files. | If I want to be able to recover my work if it’s lost, I need more than one copy on the same SSD. Around 25% of consumers prioritise recoverability. |
Extra capacity on one device doesn’t give you a separate recovery point if the drive fails or goes missing.
Keep separate copies and test them by restoring and opening files. The National Cyber Security Centre advises keeping multiple versions of important data.
If a drawing uses external references, they may be missing after you move it. Autodesk Support explains that absolute file paths need to be reset when files are moved to a different location.
Move the related project files together and check the references before clearing away the old copy.
Allow extra time if you need to relink missing references to files.
Stated sequential transfer speeds don’t measure how quickly a CAD project opens or runs. Your computer’s connection also plays a part.
Check the USB interfaces on the SSD, cable and computer, and make sure they suit the files you regularly copy.
The XS1000 range is worth considering for compact project storage; Kingston lists 1 TB and 2 TB models. The Dual Portable SSD is a separate model with built-in USB-A and USB-C connectors.
The T7 Shield is worth considering if protection during transport matters. The T9 is designed for people who value its stated transfer speed and have a compatible computer port.
The X9 Pro 1 TB may be a good fit if a small device suits your workspace; Crucial lists its dimensions as 65 × 50 mm.
These product picks focus on external SSD storage for CAD projects, with portability, limited workspace and file transfers in mind.
No image available
A portable 1TB SSD for project files you want to take with you.
Stated read speed: 800 MB/s. Drop protection up to 2 m.
No image available
A portable 1TB SSD to consider if your computer supports USB 3.2 Gen 2x2 and you regularly transfer large project folders.
Stated read speed of up to 2.000 MB/s; USB 3.2 Gen 2x2. IP65 dust and water resistance, and drop protection up to 3 m. Approximate dimensions: 8,51 × 5,08 × 0,99 cm; weight: 46,9 g.
No image available
A portable 1TB SSD for project files you want to transfer between devices.
Stated read speed of up to 1.000 MB/s; USB 3.2 Gen 2. Integrated USB-C cable and drop protection up to 2 m.
No image available
The 2TB model is an option if you want to keep several project folders and revisions.
Stated sequential read and write speeds of up to 1.050/1.000 MB/s. Drop resistance up to 2 m. USB-C-to-C and USB-C-to-A cables listed.
No image available
The 1TB model is an option for project files you want to keep on a compact external SSD.
Stated sequential read and write speeds of up to 1.050/1.000 MB/s. Drop resistance up to 2 m. USB-C-to-C and USB-C-to-A cables listed.
First, check whether the drawing uses external references. Autodesk Support explains that absolute paths can break after files are moved. Take the associated project files with you and check that the references work in the new location.
As a test, restore some files and open them. The National Cyber Security Centre advises checking not only that a backup has been made, but also that restoration works and the files are usable.
Not necessarily: the stated sequential transfer speed is not a measure of CAD performance. Check that the SSD and cable connections are compatible with the computer you want to use the drive with.
No. According to the Dutch government, the Netherlands has no fixed legal guarantee period; what matters is what you could reasonably expect from the product. If there’s a problem, contact the seller. A manufacturer’s guarantee is separate.