Who is this advice for?

Designer working with linked project files

When restoring a project, you want to recover not just the main model but also its references and supporting files. Autodesk explains which project dependencies can be included with eTransmit and which file types aren’t added automatically.

Designer using both Windows and Mac computers

You exchange project files between systems or use Time Machine. The right drive format then depends on how you plan to use the SSD: Apple distinguishes between file sharing and a Time Machine backup disk.

Designer who carries backups around

You transport project copies between locations and want to weigh protection against physical damage against access control. A rugged enclosure is no substitute for a separately stored and tested backup.

What should you look for in an external SSD for architectural projects?

Start by deciding what you’ll actually need to recover if something goes wrong. Then work out how much storage, compatibility, transfer speed and protection you’ll need.

What to consider What to look for Who should prioritise it
Complete recovery List your project folders, linked files and supporting materials; test whether a restored copy opens. If I need references and supporting files after recovery, I check more than just the main model. That’s why around 28% of consumers prioritise complete recovery.
Space for versions Measure all the folders you want to include and decide how many restore points to keep; compare this with the usable space on the model you’re considering. If I want to keep several project versions, I need space for the associated files as well as the current model. Around 22% of consumers put this capacity first.
Computer and backup method Check the ports and cables on the computers you use. Apple recommends APFS or encrypted APFS for Time Machine; exFAT is an option for sharing files with Windows. If I want to use the same drive with different computers or need Time Machine, both the connection and format must be suitable. Around 22% of consumers put this compatibility first.
Transfer time Match the interface and cable to your computer; don’t compare manufacturers’ maximum speeds directly with measurements from a test setup. When I regularly transfer large projects, I want to know whether my computer can make use of the chosen interface. Around 17% of consumers put transfer speed at the top of their list.
Protection and access Check IP ratings and drop-protection claims for the exact model. Consider access controls for confidential files, and keep a separate backup as well. If I carry the drive around or store confidential project files on it, I consider both physical protection and access controls. Around 11% of consumers prioritise this protection.

Common mistakes when backing up projects

  • Copying only the main model

    A project copy may be incomplete if linked or external files are missing. Autodesk notes that certain file types aren’t automatically added to a Revit eTransmit.

    List the dependencies and additional materials, add any missing files, and test whether the restored project opens.

    Recreating missing references or supporting files later takes extra time.

  • Assuming a high MB/s figure guarantees fast backups

    A manufacturer’s maximum speed doesn’t tell you how quickly a project will copy on your computer. StorageReview notes that the computer port, enclosure and heat can all limit measured throughput.

    Check that your computer and cable support the interface, and compare speeds only when the test conditions are clear.

  • Relying on one portable SSD as your only recovery copy

    If your only copy is missing or doesn’t work, you have nothing to fall back on. The Dutch Digital Trust Center advises keeping backups in different locations and testing restores regularly.

    Keep a separate copy as well, and regularly check that you can restore it.

  • Choosing exFAT before deciding how you’ll back up your Mac

    Apple says Time Machine can’t back up to a drive formatted for Windows. So a format for sharing files with Windows isn’t automatically suitable as a Time Machine destination.

    First decide whether the drive is for shared project files or for Time Machine. Formatting erases any files already on the drive.

Relevant brands to compare

Samsung

Samsung’s range includes the T7 Shield with USB 3.2 Gen 2 and the separate P9 line with USB4. Which connection is right for you depends on your computer and how you’ll use the drive.

  • Samsung quotes sequential read and write speeds of 1.050 and 1.000 MB/s for the T7 Shield and lists an IP65 rating.
  • For the 1 TB P9, Samsung quotes maximum read speeds of 4.000 MB/s and write speeds of 3.800 MB/s. These are specifications for a different model, not directly comparable real-world test results; check the exact model and host device.

LaCie

The Rugged SSD4 is a USB4 model included in StorageReview’s selection of portable SSDs.

  • In its test setup, StorageReview measured read speeds of 3.183,1 MB/s and write speeds of 3.185,4 MB/s, and listed an IP54 rating for the Rugged SSD4.
  • These results apply to that test setup and model; they don’t automatically indicate the performance of other LaCie models or computers.

SanDisk

The portable SSD range includes models for project copies and carrying files between workstations.

  • For the 2 TB Extreme PRO with USB4, SanDisk quotes maximum read speeds of 3.800 MB/s, write speeds of 3.700 MB/s and an IP65 rating. The brand also lists drop protection from heights of up to 2 metres.
  • These are SanDisk’s claims for the model specified; they don’t predict the speed of a mixed project backup on their own.

Crucial

The X10 is a USB 3.2 Gen 2×2 range with capacity options for larger collections of files.

  • For the 2 TB X10, Crucial quotes maximum sequential read speeds of 2.100 MB/s and an IP65 rating.
  • Crucial says speeds depend on the test computer, and that formatting uses some of the stated capacity.

Kingston

The compact XS2000 offers a USB 3.2 Gen 2×2 option if portability is important.

  • Kingston quotes maximum read and write speeds of 2.000 MB/s, and an IP55 rating when used with the removable rubber sleeve.
  • To reach the interface’s top speed, you’ll need a computer that supports the relevant connection. Also check that the protective sleeve suits the way you’ll use the drive.

Joybuy products for project backups

This selection includes portable external SSDs from 1 TB to 4 TB, with a range of connections and features for project copies and carrying files around.

SanDisk Portable SSD 1TB

SanDisk Portable SSD 1TB

A portable option for project copies if 1 TB is enough for the folders you want to take with you.

USB 3.2 Gen 2; read speeds of up to 800 MB/s; drop protection from heights of up to 2 metres.

View at Joybuy
SanDisk Extreme PRO Portable SSD 1TB

SanDisk Extreme PRO Portable SSD 1TB 2000MB/s

A good fit for project copies you take with you, if the storage capacity and supported connection suit your needs.

USB 3.2 Gen 2×2; read speeds of up to 2.000 MB/s; IP65; drop protection from heights of up to 3 metres; 256-bit AES hardware encryption. The maximum read speed requires a compatible host; write speeds are lower.

View at Joybuy
WD My Passport SSD WDBAGF0010BGY 1 TB

WD My Passport SSD WDBAGF0010BGY 1 TB

An option for project files if you need storage and file transfers between Windows and macOS.

USB 3.2 Gen 2; read speeds of up to 1.050 MB/s and write speeds of up to 1.000 MB/s; 256-bit AES hardware encryption with optional password protection.

View at Joybuy
Samsung T9 portable SSD 4 TB MU-PG4T0B

Samsung T9 portable SSD 4 TB MU-PG4T0B

The 4 TB model could suit you if you want to keep your project folders and several versions together.

USB 3.2 Gen 2×2; read and write speeds of up to 2.000 MB/s; drop protection from heights of up to 3 metres; compatible with Windows and macOS.

View at Joybuy
Samsung MU-PE2T0R 2TB USB Type-C 3.2 Gen 2 Blue

Samsung MU-PE2T0R 2TB USB Type-C 3.2 Gen 2 (3.1 Gen 2) Blue

A 2 TB option for project copies you take between workstations.

USB 3.2 Gen 2; read speeds of up to 1.050 MB/s and write speeds of up to 1.000 MB/s; IP65; drop protection from heights of up to 3 metres. IP65 does not mean protection against immersion in water.

View at Joybuy

Frequently asked questions

Is copying only the Revit model enough?

Not always. Autodesk explains that eTransmit can include linked and external files, but also notes that certain file types aren’t added automatically. Check for additional files and test whether the restored project opens. For other design software, check which dependencies it requires.

Can you also use the same exFAT drive for Time Machine?

Not as a Time Machine destination in that Windows-compatible format: Apple Support says Time Machine can’t back up to a drive formatted for Windows. Apple recommends APFS or encrypted APFS for Time Machine and lists exFAT as an option for sharing files with Windows. Formatting erases existing files.

How do you work out how much storage your project backup needs?

Measure the space taken up by all the project folders and dependencies you want to keep, and decide how many restore versions you need. Compare that total with the usable space on the model you’re considering; Crucial notes that formatting uses some of the stated capacity.

Is a faster SSD always worthwhile for project backups?

No. The potential benefit depends on how often you transfer large files and whether your computer and cable support the interface. StorageReview lists the port, enclosure and heat among the factors that can limit throughput. A manufacturer’s maximum speed doesn’t guarantee the speed of your backup.

Is one external SSD enough for a backup?

Don’t rely on just one copy in one location. The Dutch Digital Trust Center advises keeping backups in different locations and regularly testing that you can restore them.