Who is this suitable for?

Sharing files where a cable is an option

You share project files in a room behind thick walls and can use an Ethernet cable or an existing network connection there. Compare Wi-Fi access points with Ethernet backhaul and check how the system you choose connects.

A workspace without a network cable

You want Wi-Fi, and possibly a wired computer, in a remote workspace, but can’t run an Ethernet cable. Powerline is worth considering if the connection works through the sockets in the locations you have in mind.

One room with a weak Wi-Fi signal

You mainly want to reach one area and can place a repeater somewhere between the router and the room, where it can still receive a usable signal. Check the reception there before relying on a quoted maximum speed.

What should you consider when choosing?

Ethernet backhaul

Suitable when: you can use an existing network connection or run a cable to the additional Wi-Fi access point.

Keep in mind: the cable route, the ports and the connection mode supported by the system you choose.

Powerline

Suitable when: you can’t run a network cable, but have usable sockets in both locations.

Keep in mind: performance depends on your electrical wiring and can be affected by interference from appliances.

Wireless repeater or mesh

Suitable when: you have a position between the router and the room where the additional access point can still receive a good Wi-Fi signal.

Keep in mind: the wireless connection between the router and the additional access point also has to travel around or through obstacles.

Start by considering the connection between your router and the additional Wi-Fi access point. It determines whether project files have to pass through the wall via a cable, the mains wiring or Wi-Fi. The points below will help you choose the right option for your workspace and network.

What to consider What should you check? Who is this important for?
File-sharing connection Check whether the system supports Ethernet backhaul, which ports are available and how it connects to your existing router. If I often share project files and can use a cable, I want to avoid relying on a wireless connection between the Wi-Fi access points through the wall. Around 36% of consumers prioritise the option of using a cable for reliable file transfers.
Powerline without a cable route Check which adapters you need, whether they have Ethernet ports and how the connection performs through the sockets you plan to use. If I can’t run a network cable to my workspace, I want to know whether the connection works through the sockets there. Around 29% of consumers prioritise a connection that doesn’t require a new network cable.
Coverage for one room Check whether a repeater can still receive a usable Wi-Fi signal from its planned position between the router and the room. If I mainly want to reach one room with a weak signal, I need to find a spot where the repeater can still receive Wi-Fi. Around 21% of consumers prioritise extending wireless coverage to a single room.
Access to files Check your local network, guest access and shared file settings. If several devices use Wi-Fi, I want to prevent guests from accessing my project files. Around 14% of consumers make controlled file access their top priority.

Common buying mistakes

  • Placing a wireless repeater in the room with the weakest signal

    An additional Wi-Fi access point still needs a usable connection to the existing network. Obstacles and placement affect the signal.

    First, check for a position between the router and the room where the Wi-Fi is still usable. If there isn’t one, look into a cable connection or powerline.

  • Assuming the quoted Wi-Fi or powerline speed is what you’ll get in your workspace

    The maximum speed on the packaging doesn’t tell you how much data the connection can actually transfer through your walls. With powerline, sockets and electrical appliances can affect performance.

    Assess the connection in your workspace and through the sockets you plan to use, rather than relying on the quoted speed alone.

  • Buying a powerline adapter without checking which adapter family you already have

    According to devolo, Magic adapters and dLAN adapters do not form a shared Magic network.

    Check the full model names of your existing adapters and the new kit before choosing an upgrade.

    If the adapter families aren’t compatible, you may need a different starter kit rather than a single additional adapter.

  • Confusing greater Wi-Fi coverage with the right file access

    Wi-Fi coverage alone doesn’t determine who can open shared files. That also depends on network and file permissions.

    Check who can access your project files and how guest devices are kept separate from them.

Brands to compare

TP-Link

The models reviewed offer different options: the Deco X50 with Ethernet backhaul, the Deco PX50 with G.hn powerline and the RE705X as a repeater or wired access point.

  • TP-Link describes the Deco PX50 as using powerline between Deco units and lists a gigabit port for the RE705X.
  • These model specifications aren’t measurements of file transfers through thick walls. The RE705X’s OneMesh feature requires a compatible OneMesh router.

devolo

The Magic powerline kits reviewed are a possible option for a workspace without a network cable, provided the connection works well through your home’s electrical wiring.

  • According to devolo, the Wi-Fi adapter in the Magic 2 WiFi 6 next Starter Kit has two gigabit ports.
  • Sockets and electrical appliances can affect performance. Magic adapters do not form a shared Magic network with dLAN adapters.

FRITZ!

The FRITZ!Repeater 3000 AX is one option reviewed for extending an existing network, either wirelessly or via LAN.

  • FRITZ! lists two gigabit ports and the option of a wired connection, including with other routers.
  • Automatic transfer of Wi-Fi settings is specifically described for use with a FRITZ!Box. The quoted radio speed isn’t a measurement of performance through thick walls.

Products on Joybuy

These product options include Ethernet backhaul, powerline and mesh systems for extending Wi-Fi to a workspace. Before buying, check that the CE marking applies to the version on offer.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7, white

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

Worth considering if you want to use a mesh network with wired backhaul.

The product description mentions wired backhaul. The product name specifies Wi-Fi 7 and dual-band (2.4 GHz / 5 GHz).

Joybuy
TP-Link TL-WPA7517 KIT powerline adapter starter kit

TP-Link TL-WPA7517 KIT

A powerline Wi-Fi kit worth considering if you can’t run a network cable to your workspace.

The product description mentions a network connection through existing electrical wiring. Test the kit with the sockets you plan to use.

Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7

Linksys Velop Pro 7 Tri-Band Wi-Fi 7

A mesh option worth considering if you want to extend Wi-Fi to several rooms.

The product description mentions expansion with compatible Linksys Cognitive Mesh devices. The product name specifies tri-band (2.4 GHz / 5 GHz / 6 GHz) and Wi-Fi 7.

Joybuy
TP-Link TL-WPA7617 KIT powerline Wi-Fi kit, 1200 Mbit/s

TP-Link TL-WPA7617 KIT, 1200 Mbit/s

A powerline Wi-Fi kit worth considering if you want to extend your network to a workspace without an Ethernet cable.

The product description mentions network coverage through existing electrical wiring. The product name specifies 1200 Mbit/s; this isn’t a measurement of transfer speeds in your workspace.

Joybuy
Ubiquiti UniFi AP U7 Long-Range Wi-Fi access point

Ubiquiti UniFi AP U7 Long-Range

An access point worth considering if you have an Ethernet connection to your workspace.

The product description mentions a 2.5 Gigabit Ethernet uplink and Wi-Fi 7. Compatible PoE+ equipment is required for power.

Joybuy

Frequently asked questions

Where should I put a wireless repeater when there’s a thick internal wall?

Place the repeater somewhere it can still receive a usable signal from your existing Wi-Fi, rather than simply putting it where reception is already poor. Once it’s set up, check both the connection to the repeater and the signal in your workspace.

Can I add a mesh system without replacing my existing router?

For Deco, TP-Link describes an access point mode in which your existing router continues to manage the network functions. First, connect a Deco unit to the router via Ethernet and follow the instructions for the mode you’ve chosen. Features can vary by model and software version.

What can I do if powerline performance is disappointing in my workspace?

Test the adapters using the sockets you plan to use. devolo recommends plugging its adapters directly into a wall socket where possible and notes that interference can come from devices such as power supplies and dimmers. Moving them doesn’t guarantee a better connection.

How can I stop guests accessing my shared project files?

Check the file access permissions and your guest network settings. Extending Wi-Fi coverage doesn’t, by itself, determine who can open shared files.

Which CE marking should I check for a Wi-Fi access point in the Netherlands?

Check the CE marking on the specific version being offered. According to the Dutch Authority for Digital Infrastructure, only products with CE marking may be sold in Europe. A CE marking listed for a similar model name doesn’t prove that the version you’re buying meets the requirements.