Who might benefit from this Wi-Fi solution?

If you mainly want to fix a Wi-Fi dead zone

You want to download an audiobook in the study at the far end of the house, even though the internet works elsewhere. When extending Wi-Fi, the Consumers' Association recommends considering the signal strength and positioning of additional nodes too.

If you can run a cable

You can connect an access point in the study with a cable and want to rely less on the wireless connection between Wi-Fi nodes. FRITZ describes a LAN bridge as a way to connect a repeater to an existing router using a cable.

If you want to keep your existing equipment

You want to keep your provider's router and choose and position additional Wi-Fi nodes carefully. Remember to consider installation, updates and any terms that apply to extra services.

What should you look for in Wi-Fi for a study at the far end of the house?

Keep your existing router

Choose this if: the study is the main problem area and Wi-Fi works well elsewhere.

Trade-off: moving the router may help, but it might not be enough if the distance is great or there are obstacles in the way.

Wired access point

Choose this if: you can run an Ethernet cable to the study.

Trade-off: you’ll need a suitable cable route and available ports.

Mesh system with multiple nodes

Choose this if: several rooms have a weak signal, or you can place an extra node somewhere with a good signal.

Trade-off: extra nodes use electricity, and a wireless node still needs to maintain its own connection to the network.

New router

Choose this if: Wi-Fi is also inadequate nearer the router, or your current equipment no longer meets your needs.

Trade-off: a new router alone cannot guarantee a signal through walls or over a long distance. Check your provider settings and updates too.

What to consider Check Most important for
Signal in your workspace Test Wi-Fi in the study and in possible spots between it and the router. Check how many nodes are included in a set. I want to download an audiobook in the study without the connection dropping. Around 36% of consumers put coverage in that room first.
Connection between nodes Check whether you can run a cable and whether the equipment you choose supports access point mode or Ethernet backhaul. I want the extra node to stay reliably connected to the router, even if the study is a long way away. Around 29% of consumers prioritise the connection between the router and the room.
Size of the solution Try your existing setup first. Then compare one extra access point with a multi-node set, and consider power consumption. I want enough Wi-Fi to download audiobooks without buying more equipment than I need. Around 21% of consumers want to avoid unnecessary spending.
Setup and maintenance Check your provider settings, operating mode and firmware updates. The Dutch Authority for Digital Infrastructure states that radio equipment must carry the required CE marking. I want to extend my Wi-Fi without complicated management or missed updates. Around 14% of consumers prioritise easy setup and secure maintenance.

Common mistakes when extending Wi-Fi

  • Assuming a higher Wi-Fi speed guarantees better coverage

    The connection where you study also depends on distance, obstacles and the position of your router or extra nodes. A higher advertised speed alone won’t tell you how well Wi-Fi will work in your room.

    Test the connection where you listen, and try a position in between if needed before choosing your equipment.

    A new router or multi-node set may be unnecessary if simply changing the position solves the problem.

  • Placing a wireless mesh node where the signal has already dropped out

    The extra node needs to stay connected to another node or the router. If you put it somewhere without a usable signal, it may not be able to reach the study properly.

    Try a position in between, or, if you can run a cable, choose a wired access point or Ethernet backhaul.

    Finding a position in between may mean extra placement and connection tests; sometimes you may need another node.

  • Mixing up model variants and pack sizes

    According to TP-Link, the standard TP-Link Deco X50 has three gigabit ports per unit. The X50-PoE V2 is a different variant, with PoE power and two 2.5 Gbps ports.

    Before buying, check the full model name, number of units, ports and power requirements.

    A variant with different power or connection requirements may not work with the ports you want to use.

  • Assuming the manufacturer's warranty covers all your rights and maintenance

    ACM ConsuWijzer distinguishes between your statutory rights and the manufacturer's warranty. Mesh nodes use electricity, and NETGEAR says the RBK763S includes one year of Armor.

    Check for firmware updates and read the terms for any extra services. If you have a warranty issue, speak to the retailer.

    Factor in power consumption and check which terms apply after the included service period.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range which, according to TP-Link, is available as a set with one, two or three nodes.

  • TP-Link says the standard X50 supports optional Ethernet backhaul and has three gigabit ports per unit.
  • The X50-PoE V2 is a different variant, with PoE power and two 2.5 Gbps ports. Stated coverage areas don’t guarantee coverage in your home.

FRITZ!

According to FRITZ, the FRITZ!Repeater 1200 AX can be used to extend an existing router’s coverage.

  • FRITZ describes a wired LAN bridge that also works with a router from another manufacturer.
  • The repeater cannot replace a modem or all the functions of a router by itself. The connection mode you choose matters.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system which, according to ASUS, supports Ethernet backhaul.

  • ASUS says you can connect a main unit to your modem and use Ethernet backhaul.
  • You’ll need compatible client devices to use Wi-Fi 6 features. Stated speeds and coverage areas aren’t measurements of performance in your home.

NETGEAR

According to NETGEAR, the Orbi RBK763S is a tri-band Wi-Fi 6 system with three nodes.

  • NETGEAR lists a dedicated connection between the router and satellites.
  • NETGEAR includes one year of Armor. Check the terms for any security services after that. The stated coverage is no guarantee of coverage in your home.

Joybuy products for extending Wi-Fi

This Joybuy selection includes multi-node mesh sets and a standalone router. Check whether you want to keep your existing router, and whether a cable route or the way you plan to use the equipment is suitable for your home.

TP-Link Deco BE68 mesh set with two nodes

TP-Link Deco BE68, 2-pack

Suitable for a mesh setup with multiple nodes and wired connections. Signal strength in the study will still depend on where you place them.

The product description lists tri-band Wi-Fi, two mesh units and WAN/LAN Ethernet ports on each unit.

Joybuy
TP-Link Deco PX10 dual-band mesh router

TP-Link Deco PX10, dual-band 2,4 GHz / 5 GHz, Wi-Fi 6

Suitable if you want to extend your mesh and use your existing electrical wiring for the connection. Check that this approach is right for your setup.

The product description lists Powerline, mesh and three gigabit Ethernet ports per unit.

Joybuy
TP-Link Deco X20 Wi-Fi 6 mesh set with two units

TP-Link Deco X20 AX1800 Wi-Fi 6, 2-pack

Suitable if you want more placement options with two mesh units and may be able to connect the nodes with a cable.

The product information lists two Deco X20 units, Wi-Fi 6, management via the Deco app and optional Ethernet backhaul.

Joybuy
ASUS RT-AX52 dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 AiMesh router

Suitable if your current router or Wi-Fi is also inadequate nearby. A new router alone cannot guarantee a signal in a distant room.

The product information lists dual-band Wi-Fi 6 on 2,4 GHz and 5 GHz, gigabit Ethernet and compatibility with AiMesh equipment.

Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh set with three units

TP-Link Deco X50 Wi-Fi 6, 3-pack

Suitable if you want to place several mesh nodes and may be able to connect them with a cable.

The product information lists Wi-Fi 6 and optional Ethernet backhaul. According to TP-Link, the standard X50 has three gigabit ports per unit.

Joybuy

Frequently asked questions

Should you buy a new router if downloads are slow only in the study?

Not straight away. First check your existing connection and where the router is positioned. If Wi-Fi is weak in just one room, compare an extra access point or mesh system with replacing the whole setup.

Where should you put an extra wireless Wi-Fi node?

Put it somewhere it can maintain a good connection to the router or another node, rather than automatically placing it where the signal has already dropped out. The Consumers' Association recommends keeping obstacles to a minimum. Check the connection once the node is in place.

Can you use your own router instead of the one supplied by your internet provider?

According to ACM ConsuWijzer, you’re free to choose your router. If you connect your own device directly to your provider’s network, the connection type and required settings matter. Ask your provider for details. If you only want to extend your Wi-Fi, you can also check whether you can keep your existing provider router.

How can you keep your own router secure?

Install firmware updates, switch on automatic updates if available and change the default passwords. ACM ConsuWijzer also points out that you need to keep your own connected device up to date.

Do you need a licence to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi is licence-exempt as long as you follow the rules for the designated frequencies and their use. No notification or registration is required for this purpose either. Check that radio equipment carries the required CE marking.