Who is this guide for?

Language learner with one problem room

Your lesson keeps cutting out in one particular spot, even though the Wi-Fi works well closer to the router. The Consumers’ Association advises against placing a repeater where the signal is weakest. Instead, put it somewhere it can still receive a strong enough signal.

Household with several weak spots

You use the connection in different areas, or other members of your household are online at the same time. So consider both coverage and the connection between Wi-Fi points, as well as how many points are included in the package you choose.

Household with a mix of older and newer devices

You want to keep using your existing phones and laptops, and find out what Wi-Fi 6 means for each device. Older Wi-Fi devices can stay connected, but won’t benefit from Wi-Fi 6 improvements themselves, according to the Consumers’ Association.

What should you consider when choosing?

Standalone Wi-Fi repeater

A good fit if: one room has particularly poor reception and there’s still a usable signal from the router somewhere between the two.

Bear in mind: the repeater connects to the router wirelessly. If that incoming signal is weak, the problem may persist.

Mesh system with multiple points

A good fit if: several rooms need coverage. Check how many points are included and where you can place them.

Bear in mind: the cost and power consumption of extra points. A wireless connection between them may limit performance when the network is busy.

Wired Wi-Fi access point

A good fit if: you can run a network cable to where you want to add a Wi-Fi point.

Bear in mind: the work involved in running the cable and connecting or setting up the access point.

Powerline with Wi-Fi

A good fit if: running a network cable would be difficult and a wireless connection between points doesn’t work well enough.

Bear in mind: the connection runs through your home’s electrical wiring, so performance can vary between homes and sockets.

What to consider What should you check? Who should pay particular attention?
Coverage where you take your lesson Compare reception where you take your lesson with the proposed location for the repeater. It needs to receive a usable signal itself. If my lesson keeps cutting out in one particular spot, I want to know whether the extra point can get a good connection there; around 36% of consumers put coverage in that spot first.
Several areas and simultaneous use Check how many Wi-Fi points are included in the package and whether an Ethernet connection between the points is possible. When lessons and other devices need Wi-Fi in different areas at the same time, I look at how the points are distributed; around 29% of consumers prioritise coverage in several areas and simultaneous use.
Older and newer devices Check which Wi-Fi versions and frequency bands your devices support. An older device won’t benefit from Wi-Fi 6 improvements itself. If I want to keep using my existing phone or laptop, I check which connection that device supports; around 21% of consumers prioritise compatibility with their existing devices.
Installation and running costs Check what’s included in the package and factor in power consumption and maintenance over the long term. If you want to keep installation simple and take running costs into account, it’s worth checking the complete set and the connections you’ll need; around 14% of consumers prioritise this balance.

Common buying mistakes

  • Putting an extra point somewhere Wi-Fi barely reaches

    A repeater or mesh point needs a usable connection to the router or other points. So, where coverage is weakest, the incoming signal may also be inadequate.

    Test reception where you plan to put the point. If the signal is weak there, look into whether a cable or another type of connection is possible.

  • Assuming advertised Wi-Fi speeds are the same as your lesson speed

    Your internet connection, obstacles, devices and the connection between Wi-Fi points all play a part. A maximum Wi-Fi specification alone doesn’t tell you what speed you’ll get where you take your lesson.

    Compare a wired test at the router with the connection where you take your lesson, and check that you’re looking at the right model version.

  • Confusing an add-on adapter with a complete powerline set

    A standalone add-on adapter isn’t the same as a starter kit with adapters at both ends. Without the necessary adapter, you may not be able to set up the connection.

    Before buying, check how many adapters are included and what type they are.

  • Assuming the manufacturer’s warranty covers all your statutory rights

    In the Netherlands, a manufacturer’s warranty doesn’t replace your statutory rights if a product doesn’t do what you could reasonably expect it to.

    Keep your proof of purchase and product information, and report any fault to the seller.

Brands to compare

TP-Link

The RE705X is a standalone repeater, while the Deco X20 is a mesh system with multiple points. They’re different product lines for different expansion needs.

  • TP-Link says the RE705X has a gigabit port and access point mode. The Deco X20 supports Ethernet backhaul.
  • The RE705X’s stated OneMesh functionality requires a compatible OneMesh router. For a Deco offer, check how many points are included in the exact package.

FRITZ!

The FRITZ!Repeater 1200 AX is worth comparing if you’re looking for a standalone extra Wi-Fi point or want to use a LAN connection.

  • FRITZ! says this model has a gigabit LAN connection and can also be used with other routers.
  • The integrated mesh functionality described applies to a network with a FRITZ!Box and compatible FRITZ! devices. Check the exact version.

devolo

The Magic 2 WiFi 6 next Starter Kit combines powerline with Wi-Fi and is worth comparing when running a cable would be difficult.

  • According to devolo, the starter kit contains two adapters and the Wi-Fi device has two gigabit ports.
  • Manufacturer claims about speed or coverage aren’t a measurement of performance in your home. Buying a standalone add-on adapter isn’t the same as buying the starter kit.

Joybuy product picks

These products are designed to extend Wi-Fi to several areas: mesh systems and a powerline set with Wi-Fi. Check which technology and set size suit your home and the place where you take your language lesson.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 2-Pack

A mesh system with two units to extend Wi-Fi to several areas of your home.

The product description lists Wi-Fi 7, 2.4, 5 and 6 GHz bands, wired ports and support for older Wi-Fi standards.

Joybuy
TP-LINK TL-WPA7517 KIT powerline starter kit

TP-LINK TL-WPA7517 KIT Powerline Starter Kit

A powerline starter kit with Wi-Fi for an area where running a network cable would be difficult and a wireless connection between points doesn’t work well enough.

The product information lists a maximum data transfer rate of 1,000 Mbit/s and a Type E plug. The actual connection can vary between homes and sockets.

Joybuy
TP-Link Deco X50 3-pack dual-band mesh system

TP-Link Deco X50 (3-Pack) Dual-Band Wi-Fi 6

A mesh system with three units for households that need Wi-Fi in several areas.

The product information lists dual-band Wi-Fi on 2.4 and 5 GHz, support for earlier Wi-Fi standards and three gigabit ports per unit.

Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band mesh system

TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

A mesh system with three units to extend coverage to several areas of your home.

The product information lists tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz, Ethernet ports per unit and support for earlier Wi-Fi standards.

Joybuy
TP-Link Deco X50-PoE 3-pack mesh system

TP-Link Deco X50-PoE (3-Pack) Dual-Band Wi-Fi 6

A mesh system with three units to extend Wi-Fi to several areas.

The product information lists dual-band Wi-Fi 6, Power over Ethernet (PoE) and two Ethernet ports per unit.

Joybuy

Frequently asked questions

Will a Wi-Fi booster help if the internet connection itself is slow?

Not necessarily. First, connect a computer to the router using a network cable and test the connection. Then compare it with the connection where you take your lesson. If the wired connection is consistently slow, look into your internet connection first or contact your provider.

Where should you place a wireless repeater?

Place the repeater between the router and the problem room, somewhere it can still connect well to the network. The Consumers’ Association suggests using an indicator or set-up app to help find a suitable spot.

Will older devices still work with a Wi-Fi 6 booster?

Yes. Devices using an older Wi-Fi version can still connect, but won’t benefit from Wi-Fi 6 improvements themselves, according to the Consumers’ Association. Also check which network and security settings your devices need.

What product information should you check before buying?

For the specific model, check that the required CE marking and applicable European radio equipment requirements are stated. The Dutch Authority for Digital Infrastructure explains these requirements for radio equipment sold in the Netherlands. A CE marking isn’t an independent assessment of Wi-Fi performance.

What warranty applies to a booster bought online?

In addition to any manufacturer’s warranty, you have statutory rights if the product doesn’t do what you could reasonably expect it to. ACM ConsuWijzer identifies the seller as your point of contact for an appropriate solution if a product is faulty. A manufacturer’s warranty doesn’t automatically define the limits of your statutory rights.