A household with a hard-to-reach hobby room
You have internet in your study nook, but want to know whether the Wi-Fi signal can reach the hobby room through walls and across the distance.
Don’t replace your main router automatically if Wi-Fi coverage is poor only in the hobby room. First, check your internet connection at the router and measure the Wi-Fi signal in both rooms. The Consumers’ Association points out that distance and obstacles can weaken the signal. If you can run a cable to the hobby room, you can install a wired access point or mesh node. If not, your choice of mesh, repeater or powerline will depend on the placement and connection in each location.
You have internet in your study nook, but want to know whether the Wi-Fi signal can reach the hobby room through walls and across the distance.
You want a reliable connection in both locations and can connect an additional Wi-Fi access point by cable.
You’re looking to extend your network using wireless nodes or powerline adapters, and want to assess the connection in the rooms concerned.
First, measure the connection at the router and the Wi-Fi signal in both rooms. This helps you distinguish an internet connection issue from limited coverage. If you can run a cable to the hobby room, consider a wired access point or mesh node. Without a cable, placement and the connection between the nodes are key.
| What matters when buying? | What should you look for? | Who does this matter most to? |
|---|---|---|
| Coverage over distance and around obstacles | Measure the Wi-Fi signal in both rooms and see where an additional node can still receive a usable signal. | If I work or enjoy my hobbies in the hobby room, I want to know whether the signal reaches it. Around 36% of consumers in this situation are mainly looking for better coverage. |
| A stable connection | Check whether there’s an Ethernet cable to the hobby room and whether the nodes you choose support a wired connection. | I want a dependable connection between the rooms for work or hobbies, and can run a cable if needed. Around 29% of consumers prioritise this kind of wired stability. |
| Extending your network without a cable | See where a wireless node can receive a signal; test powerline in the rooms concerned and check that the adapters are compatible. | If running a cable isn’t practical, I’m looking for a way to connect the hobby room to the network. Around 21% of this group are mainly looking to extend their network without cables. |
| Connection and management | Check access point mode, the connection settings you’ll need and how to install firmware updates. | I want to keep using my provider’s router and know how to manage and update my network. Around 14% of consumers prioritise a straightforward connection and easy management. |
A product’s maximum stated speed doesn’t tell you what you’ll get in the hobby room. Distance, walls and other obstacles all affect the signal.
Measure the connection in both locations, then assess the link between the network nodes.
A wireless extender needs a usable signal from your existing network.
Try a spot between the two locations. If the wireless connection isn’t usable there, look into a wired connection.
TP-Link describes different wiring requirements for Deco in router mode and access point mode.
Decide which router will remain active, then follow the connection instructions for the mode you’ve chosen.
devolo says that Magic adapters aren’t compatible with the older dLAN range.
Check which adapter family you have before choosing a standalone extension adapter.
The Deco X50 range includes mesh kits with one, two or three nodes. TP-Link says you can use Ethernet backhaul to connect Deco nodes with a network cable.
The FRITZ!Repeater 1200 AX is designed to extend an existing network and has one gigabit LAN port.
The Magic 2 WiFi next Starter Kit offers a powerline-plus-Wi-Fi solution: its adapters send data over your home’s electrical wiring.
The RT-AX58U is a standalone Wi-Fi 6 router. ASUS says it supports AiMesh with compatible ASUS routers.
This selection features Deco mesh kits for extending Wi-Fi to multiple rooms. Check which connections and installation options are available with the exact kit, and measure the connection where you plan to use it.
No image available
A mesh kit for extending Wi-Fi to multiple rooms; measure the connection where you plan to use it in the hobby room.
Wi-Fi 6; dual-band (2,4 GHz/5 GHz); three Deco X50 nodes according to the product name.
No image available
A mesh kit for extending coverage to multiple rooms; check that its connection options suit your planned setup.
Wi-Fi 6; dual-band (2,4 GHz/5 GHz); PoE; two-piece set according to the product name.
No image available
A mesh kit for extending coverage to multiple rooms; check the connection between the nodes in the locations you have in mind.
Wi-Fi 6E (802.11ax); tri-band (2,4 GHz/5 GHz/6 GHz); three nodes according to the product name.
No image available
A mesh option for extending coverage to multiple rooms; assess the signal and connection wherever you need Wi-Fi.
Wi-Fi 6E; tri-band (2,4 GHz/5 GHz/6 GHz).
No image available
A mesh kit for two rooms; check where the second node can still get a usable connection to the network.
Wi-Fi 6; dual-band (2,4 GHz/5 GHz); two-piece set according to the product name.
Not necessarily. First, test your internet connection using a cable and try moving the router to a better position. If the signal is still weak mainly in the hobby room, compare extending your existing network with replacing the router.
Check whether the kit supports access point mode. TP-Link describes a different wiring setup for Deco in access point mode than in router mode, so follow the instructions for the mode you choose.
Check regularly for firmware updates and turn on automatic updates if available. Safe Internetting recommends protecting routers by installing the latest updates.
According to ACM ConsuWijzer, you have the right to choose your own router in the Netherlands and can usually choose your own modem too. A provider may refuse an unsafe device; ask for the connection settings you’ll need for your own equipment.
Check the CE marking on the specific version being offered. The Dutch Authority for Digital Infrastructure says CE marking is relevant for wireless equipment; a model name alone doesn’t confirm that the particular version complies.