Home worker with a cable route
You want a reliable connection at your workspace as well as Wi-Fi in the hobby room, and may be able to connect the rooms with Ethernet.
Start by testing the Wi-Fi in both locations and, if needed, try repositioning your existing router before replacing anything. If you can run an Ethernet cable to the hobby room, compare a wired access point or mesh system with Ethernet backhaul. Without a cable, the choice between wireless mesh and powerline depends on the signal and, for powerline, your home’s electrical wiring. A higher advertised Wi-Fi speed does not, by itself, prove that the signal will pass through walls or floors effectively.
You want a reliable connection at your workspace as well as Wi-Fi in the hobby room, and may be able to connect the rooms with Ethernet.
You’re looking for a wireless or powerline connection between the rooms and need to take walls and floors into account.
You want to keep your existing connection and simply extend its range, without automatically buying a new modem or router.
Start by testing and improving your existing setup. Then choose between a wired connection, an additional wireless access point or powerline, depending on what’s possible in your home.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| Connection between the rooms | Test both locations and see whether Ethernet backhaul or a reliable wireless connection is possible. | I want to work and enjoy my hobbies in both rooms without walls or floors making the connection unusable. Around 36% of consumers prioritise the connection between rooms. |
| Connection to your existing network | Make a note of your router, the available LAN ports and whether the system will be set up as an access point or a router. | I want to keep my provider’s router and only extend my network if it works with my current connection. Around 29% of consumers prioritise keeping their existing setup. |
| Installation without a network cable | Check where an additional wireless access point can still receive a reliable signal. For powerline, also check model compatibility and your home’s electrical wiring. | I can’t run a network cable between the rooms and want to know whether wireless or powerline will work here. Around 21% of consumers prioritise avoiding cable installation. |
| Updates and additional services | Check how the specific model receives updates and what terms apply to security services after any included period. | I want to know how to maintain my network and whether additional services will continue later on. Around 14% of consumers prioritise network management and the terms for additional services. |
Walls, floors, placement and the connection between network points all affect the signal that reaches the other room. An advertised speed isn’t a measurement of performance in your home.
First test your current connection and assess what kind of link between the rooms is possible.
The additional access point also needs to maintain a reliable connection to the main network.
Try a position between the main router and the hobby room, or see whether Ethernet backhaul is possible.
According to TP-Link, the Deco PX50 cannot use powerline backhaul with the Deco PX10, P7 or P9.
Check the full model names and whether your electrical wiring is suitable before relying on powerline.
For this combination, you’ll need to choose a different compatible setup.
NETGEAR states that one year of Armor is included with the Orbi RBK763S.
Check the terms after that period and continue installing available router updates.
If you want to keep using the service afterwards, check the renewal terms in advance.
According to TP-Link, the Deco X50 offers mesh networking with Ethernet ports, while the Deco PX50 adds G.hn powerline for compatible PX50 units.
ASUS describes AiMesh and ZenWiFi configurations with Ethernet backhaul for compatible network points.
NETGEAR describes the Orbi RBK763S as a tri-band mesh system with a dedicated connection for communication between the router and satellite.
These products are mesh systems and access points for wired extensions or Wi-Fi across multiple rooms. For the specific model, also check the CE marking: the Netherlands Authority for Digital Infrastructure notes that radio equipment sold in Europe must meet the applicable product requirements and carry a CE marking.
No image available
An option if you want to connect two rooms using mesh and choose between wired and wireless backhaul.
Three Ethernet ports per unit.
No image available
An option if you want to combine mesh with the option of Ethernet backhaul.
Dual-band Wi-Fi 6; three Gigabit Ethernet ports per unit. Ethernet backhaul is an option.
No image available
An option if you want to extend Wi-Fi to a room with an Ethernet connection.
Ethernet port, PoE support, and wall or ceiling mounting.
No image available
An option if you’re looking for a mesh system with PoE support and wired connections.
Dual-band Wi-Fi 6 and two Ethernet ports per unit.
No image available
An option if you want a three-unit mesh system to use across several rooms.
Tri-band Wi-Fi 6E and three Gigabit Ethernet ports per unit.
No. First, test the connection and try repositioning or adjusting your existing router. If that doesn’t help enough, look into an access point or an additional mesh point.
According to TP-Link, first set up the points on the same network using the app. How you connect a satellite depends on whether you’re using router or access point mode. Check in the app that Ethernet backhaul is active.
No. According to TP-Link, the PX50 cannot use powerline backhaul with the PX10, P7 or P9. Also check that the units you’ve chosen and your home’s electrical wiring are suitable for the connection you have in mind.
In the Netherlands, according to the Netherlands Authority for Consumers and Markets’ ConsuWijzer, you can choose your own device if it meets the same applicable safety and network requirements. Ask your provider for the settings you need if you’re replacing its device.
The Netherlands Authority for Digital Infrastructure states that radio equipment sold in Europe must meet the applicable product requirements and carry a CE marking. Check this for the specific model you intend to buy.