Who is this buying guide for?

Printmaker working in a shared space

You want to pack away your setup quickly after taking photos, so you pay attention to its size, how it attaches and how much room the stand takes up.

Photographer taking an overall shot

You want to capture the whole etching and the tone of the paper clearly, without distracting glare. The Canadian Conservation Institute describes using two light sources on either side, at an angle of around 45 degrees, as one way to light the surface evenly.

Documenting the relief of a print

You also want to show the texture of the print and paper. The Library of Congress describes raking light from a single light source positioned low to one side as a way to accentuate texture.

What should you look for when buying?

First decide whether your main priority is an evenly lit overall shot, showing the relief, or being able to clear away the setup quickly after use.

What to consider What to look for Who is it important for?
Even lighting Check the size of the light source and whether there is room to position lights on either side. Check the whole sheet in a test shot, including the edges. If I want an overall shot in which the entire etching is clear, I check the lighting across the whole sheet; around 33% of consumers say even lighting is their top priority.
Visible relief Check that the lamp and stand can be positioned securely and low beside the etching, and that you can adjust the diffusion as needed. If I also want to show indented lines and the texture of the paper, I take a separate shot with a light positioned low to one side; around 17% of consumers say showing relief is their main consideration.
Space and storage Compare the size of the setup in use and in storage, and check where the stand can go. Keep cables out of walkways and follow the instructions for the lamp you choose. If the workspace needs to be clear again after taking photos, I look for a setup I can position and store safely; around 25% of consumers say limited workspace is their top priority.
Compatibility and a complete setup Check the exact lamp model and its fitting or panel size. Also check whether the lamp, power supply and stand are included. If I already have a light source I want to keep using, I first check whether the softbox fits it and what else I need; around 25% of consumers put system compatibility and a complete setup first.

Common buying mistakes

  • Assuming a softbox on its own is a complete lighting kit

    A softbox shapes light; it doesn’t guarantee that a lamp or stand is included. The product information for the NEEWER softbox mentioned here explicitly says that the lamp is not included.

    Before ordering, compare what’s included in the specific offer with the equipment you already have.

    You may need a compatible lamp, power supply or stand for a working setup. Check exactly what is included with each item.

  • Expecting diffuse lighting to show relief at its best

    Even lighting and visible relief serve different photographic purposes. Raking light can bring out texture, but it can also make imperfections and shadows more noticeable.

    If needed, take a separate overall shot and another with a single light source positioned low to one side.

  • Searching only for the word ‘softbox’

    A Bowens softbox and a model that attaches with straps to a specific bare LED panel have different fittings.

    First note the exact lamp model, then check compatibility and the manufacturer’s fitting instructions.

  • Setting up in the middle of a shared walkway

    A stand and cables can take up space in a workshop used by other people too.

    Choose a spot where the setup is stable and won’t block the walkway, and follow the lamp’s model-specific safety instructions.

Brands to consider

amaran

The Light Box 45x45 is a compact, foldable Bowens softbox, while the 100x S is a separate Bowens-mount LED light source.

  • According to amaran, the Light Box 45x45 includes diffusion, an inner baffle and a grid. Its stated dimensions when assembled are 45 × 45 × 34,5 cm.
  • Check that the softbox fits your exact light, and see which parts are included in the offer; a lamp and stand are not confirmed as included with the softbox.

Godox

The SB-FW6090 is a rectangular Bowens softbox. The SL60IIBi is a separate continuous LED light with a Bowens mount.

  • Godox specifies an adjustable colour temperature of 2800–6500 K for the SL60IIBi.
  • This specification alone says nothing about the colour accuracy of a complete setup for photographing an etching. Check the compatibility of the softbox, lamp and stand separately.

NEEWER

NEEWER makes a softbox designed specifically for a 660 LED panel, which may be useful if you already own one.

  • According to NEEWER, the softbox attaches to a bare panel with straps.
  • NEEWER states that the LED light is not included. The stated panel compatibility does not automatically extend to other panels or Bowens lights.

Profoto

The OCF Softbox 2x3' is an option if you already use a compatible Profoto flash system.

  • Profoto lists compatible flash heads and an OCF speedring for this softbox.
  • The manufacturer describes this model as a softbox for off-camera flash, not as a complete continuous-light kit. Don’t assume it will fit a Bowens light or 660 LED panel without checking.

Related products on Joybuy

Related products coming soon.

Frequently asked questions

Should you photograph an etching with two softboxes?

Not for every shot. The Canadian Conservation Institute describes two light sources on either side, at an angle of around 45 degrees, as a starting point for even lighting. If you want to show the surface texture, you may also need to take a separate shot with a single light source positioned low to one side, then assess the result for the specific etching.

Will a softbox fit any studio light?

No. Check the fitting on the exact model. The amaran Light Box 45x45 and Godox SB-FW6090 are described as having a Bowens mount, while the NEEWER softbox mentioned here is designed to attach with straps to a bare 660 LED panel. Also follow the manufacturer’s fitting instructions.

Which parts should you check before buying a softbox?

Check whether the lamp, power supply and stand are included in the offer. NEEWER explicitly states that the lamp is not included with the softbox mentioned here. When buying as a consumer in the Netherlands, you have statutory protection if a product does not meet reasonable expectations; this is separate from a commercial manufacturer’s warranty.

Is CE marking required on every standalone softbox?

That depends on the classification of the exact product. According to Dutch government information, CE marking is required for specified product groups and must not be applied to products for which it is not required. Check which product rules apply to the electrical lamp and other parts you choose; don’t assume the requirement applies just because the product is called a softbox.

Can you publish a photo of someone else’s etching?

Taking a photo yourself does not automatically give you permission to publish someone else’s copyright-protected artwork. The Dutch government states that a copy for personal use may not be distributed or made public. Check the rights status of the specific etching and whether you need permission.